• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1169-1171
• /
• 2003

This paper presents a 1.6[kW]class single phase high power factor(HPF) pulse width modulation(PWM) boost rectifier featuring soft commutation of the active switches at zero current. It incorporates the most desirable properties of conventional PWM and soft switching resonant techniques. The input current shaping is achieved with average current mode control and continuous inductor current mode. This new PWM converter provides zero current turn on and turn off of the active switches, and it is suitable for high power applications employing insulated gate bipolar transistors(IGBT'S). The principle of operation, the theoretical analysis, a design example, and experimental results from laboratory prototype rated at 1.6[kW] with 400[Vdc] output voltage are presented. The measured efficiency and the power factor were 96.2[%] and 0.99[%], respectively, with an input current Total Harmonic Distortion(THD) equal to 3.94[%], for an input voltage with THD equal to 3.8[%], at rated load.

• 한국산학기술학회논문지
• /
• 제8권5호
• /
• pp.1047-1056
• /
• 2007

기본적으로 초음파 영상 시스템은 반사 계수를 보는 B-모드와 혈류의 속도를 구하는 도플러 영상 모드를 구비하고 있다. 본 논문에서는 도플러 영상 모드에서 혈류의 속도를 나타내는 도플러 주파수가 펄스반복주파수의 1/2을 초과하는 경우 발생하는 에일리어싱 현상을 검출해 보상하는 새로운 방법을 제시하고 컴퓨터 시뮬레이션을 통하여 타당성을 보여준다. 본 논문에서 제안하는 방법은 추정 가능한 도플러 주파수를 확장시켜 줄 뿐만 아니라 잡음에 대해서도 강인한 특성을 가진다. 시뮬레이션 결과 신호 대 잡음비가 약 20dB로 낮은 경우에도 에일리어싱을 제대로 보상할 수 있음을 알 수 있었다.

• 전력전자학회논문지
• /
• 제12권3호
• /
• pp.241-247
• /
• 2007

LLC 하프브리지 다중 출력용 컨버터의 보조 출력부와 같이, 펄스 전압을 입력으로 갖는 PWM 컨버터에서는 출력 정전압 제어를 위하여 스위치의 턴 온 제어 방식을 필요로 한다. 본 논문에서는 전류 불연속 모드로 동작하는 벅 컨버터의 새로운 도통시간 턴 온 제어방식에 대하여 논하였다. 제안된 LEM 제어 방식의 PWM 동작 원리를 설명하였으며, 임펄스 응답 이론을 근거로 인덕터 전류의 소신호 주파수 응답 특성을 고찰하였다. 또한 60인치 PDP 어드레스용 100W급 파워 모듈에 적용함으로서 제안된 제어 방식의 타당성을 검증하였다.

• Journal of Power Electronics
• /
• 제15권2호
• /
• pp.504-517
• /
• 2015

This paper presents a novel switching voltage model and an offset-based pulse width modulation (PWM) scheme for multilevel inverters with unbalanced DC sources. The switching voltage model under a DC voltage imbalance will be formulated in general form for multilevel neutral-point-clamped topologies. Analysis of the reference switching voltages from active and non-active switching voltage components in abc coordinates can enable voltage implementation for an unbalanced DC-source condition. Offset voltage is introduced as an indispensable variable in the switching voltage model for multilevel voltage-source inverters. The PWM performance is controlled through the design of two offset components in a subsequence. One main offset may refer to the common mode voltage, and the other offset restricts its effect on the quality of PWM control in related DC levels. The PWM quality can be improved as the switching loss is reduced in a discontinuous PWM mode by setting the local offset, which is related to the load currents. The validity of the proposed algorithm is verified by experimental results.

• Nuclear Engineering and Technology
• /
• 제50권5호
• /
• pp.690-697
• /
• 2018

Criticality alarm systems (CASs) are mandatory in nuclear plants for prompt alarm in the event of any criticality incident. False criticality alarms are not desirable as they create a panic environment for radiation workers. The present article describes the design enhancement of the CAS at each stage and provides maximum availability, preventing false criticality alarms. The failure mode and effect analysis are carried out on each element of a CAS. Based on the analysis, additional hardware circuits are developed for early fault detection. Two different methods are developed, one method for channel loop functionality test and another method for dose alarm test using electronic transient pulse. The design enhancement made for the external systems that are integrated with a CAS includes the power supply, criticality evacuation hooter circuit, radiation data acquisition system along with selection of different soft alarm set points, and centralized electronic test facility. The CAS incorporating all improvements are assembled, installed, tested, and validated along with rigorous surveillance procedures in a nuclear plant for a period of 18,000 h.

• 한국광학회지
• /
• 제1권2호
• /
• pp.135-141
• /
• 1990

레이저로 가열된 두께 160$\mu\textrm{m}$의 얇은 Si의 비선형 광학적 성질을 들띄움-탐사방법(pump-probe method)으로 조사하였다. 펄스폭은 180$\mu$sec이고 $TEM_{00}$-mode의 맥동형 Nd-YAG 레이저로 Si을 가열하였고, 발생하는 온도증가는 Si의 band gap 근처의 파장을 갖는 탐사광의 투과도변화를 관찰하여 측정하였다. Si의 온도상승은 입사된 레이저 광도에 비례함을 알 수 있었고, 실험상 최대 광대 25KW/$\textrm{cm}^2$의 레이저 빛살입사에 의해 $16^{\circ}C$의 온도상승을 관찰하였다. 이 결과로부터 Nd:YAG 레이저 파장에서의 온도변화에 따른 Sㅑ의 3차 비선형 광학계수 $\chi{(3)}$은 $6.6\times10^{-5}$로 산출되었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권12호
• /
• pp.3182-3196
• /
• 2012

In this paper, we present a new LED (Light Emitting Diode) mood lighting system interacting with smartphones based on the generation of different light sequences. In the proposed system, one light sequence is considered to be one unit of the service contents, which is then transmitted through a network and played in an LED lighting system. To this end, we propose a novel generation scheme using a smartphone, and a decoding/playing mechanism in an LED lighting system. The lighting sequences have a fixed period divided into predefined time units. Two modes - basic and interpolation - are supported in each time unit when playing a color sequence. In the basic mode, the color is maintained for the entire time unit, whereas in the interpolation mode the color is interpolated. The sequence is decoded and played in the lighting circuit by changing the duty cycle of a PWM (Pulse Width Modulation) signal. A demonstration system of the overall proposed method was using smartphones, a server and an LED lighting system. The results from this experiment show the validity and applicability of the proposed scheme.

• Journal of Astronomy and Space Sciences
• /
• 제38권3호
• /
• pp.165-173
• /
• 2021

Apophis is a near-Earth object with a diameter of approximately 340 m, which will come closer to the Earth than a geostationary orbit in 2029, offering a unique opportunity for characterizing the object during the upcoming encounter. Therefore, Korea Astronomy and Space Science Institute has a plan to propose a space mission to explore the Apophis asteroid using scientific instruments such as a laser altimeter. In this study, we evaluate the performance metrics of a laser altimeter using a pseudorandom noise modulation technique for the Apophis mission, in terms of detection probability and ranging accuracy. The closed-form expression of detection probability is provided using the cross correlation between the received pulse trains and pseudo-random binary sequence. And the new ranging accuracy model using Gaussian error propagation is also derived by considering the sampling rate. The operation range is significantly limited by thermal noise rather than background noise, owing to not only the low power laser but also the avalanche photodiode in the analog mode operation. However, it is demonstrated from the numerical simulation that the laser altimeter can achieve the ranging performance required for a proximity operation mode, which employs commercially available components onboard CubeSat-scale satellites for optical communications.

• 한국군사과학기술학회지
• /
• 제22권3호
• /
• pp.332-340
• /
• 2019

Electronic warfare systems are needed to be advantageous in the modern war. Many radar threat signals with various frequency spectrums and complicated techniques exist. For detecting the threats, a receiver with wide and narrow-band digital processing is needed. To process a wide-band searching mode, a polyphase filter bank has become the architecture of choice to efficiently detect threats. A polyphase N-path filter aligns the re-sampled time series in each path, and a discrete Fourier transform aligns phase and separates the sub-channel baseband aliases. Multiple threats and CW are detected or rejected when the signals are received in different sub-channels. And also, to process a narrow-band precision mode, a direct down converter is needed to reduce aliasing by using a decimation filter. These digital logics are designed in a FPGA. This paper shows how to design and develop a wide and narrow-band digital receiver that is capable to detect the threats.

• 전기학회논문지P
• /
• 제67권4호
• /
• pp.214-220
• /
• 2018

Light sources induced by gas discharge using rare gases have been widely used in the thin film deposition, the surface modification and the polymer etching. A dielectric barrier discharge (DBD) has been developed in order to consistently emit light and control the wavelength of the emission light. However, much research on the characteristics of the movement of discharge particles is required to improve the efficiency of the light lamp and the life-time of the light apparatus in detail. In this paper, we developed a He DBD discharge simulation tool and investigated the characteristics of discharge particles which were electrons, two positive ions ($He^+$, $He_2^+$) and 5 excited particles ($He^*(1S)$, $He^*(3S)$, $He^*$, $He^{**}$, $He^{***}$). The discharge currents showed the transition from pulse mode to continuous mode with the increase of power. With the accumulated charges on the barrier walls, the discharge current was rapidly increased and caused oscillation of the discharge voltage. As the gas pressure increased, $He_2^+$ and $He^*(3S)$ became the dominant activated particles. The input power was mostly consumed by electrons and $He_2^+$ ion. And the change curve showed that power consumption by electrons increased more with gas pressure than with source voltage or frequency.