• Proceedings of the KAIS Fall Conference
• /
• 2011.12a
• /
• pp.262-265
• /
• 2011

본 연구는 탈진 기류 분사 시스템의 최적화 설계에 관한 기초 연구의 일환으로 전산유체역학(CFD)을 이용하여 일반 블로우 튜브와 단순 벤츄리 조합의 충격 기류(Pulse air jet) 방식의 탈진 장치에 대한 탈진 성능과 벤츄리 입구에 기류 유도용 구조물을 설치한 경우의 탈진 성능을 비교하였다. 각 Case별로 벤츄리 내부로 유입되는 탈진 공기량을 예측한 결과, case 2의 벤츄리 형상 개조시 case 1 보다 벤츄리로 유입되는 탈진 공기량이 약 20% 증폭되는 것으로 나타났다. 또한 필터백 표면에서의 탈진 기류 전달 분포를 예측한 결과, 모든 case가 필터백의 국한된 영역으로 탈진 기류가 집중됨을 알 수 있었다. 또한, case 2의 경우가 case 1보다 오히려 탈진 기류의 전달 수준이 불량함을 알 수 있다. 이는 case 2의 경우 벤츄리 입구에 기류 유도용 구조물을 설치한 것이 탈진 공기량을 증폭시키는데에는 도움이 되나, 오히려 벤츄리 내부로 유입된 탈진 기류의 직진성을 보완하여 필터백 내부에서 탈진 기류의 확장을 방해하기 때문인 것으로 판단된다.

• Journal of Embryo Transfer
• /
• v.33 no.3
• /
• pp.119-127
• /
• 2018

The purpose of this study is to examined the electrofusion and activation conditions for the production of porcine somatic cell nuclear transfer (SCNT) embryos. In this study, immature oocytes were cultured in TCM-199 with and without hormones for 22 hours. Skin fibroblasts cells of porcine were transferred into the perivitelline space of enucleated in vitro matured oocytes. Cell fusion was performed with two different pulses that each one pulse (DC) of 1.1 kV/cm or 1.5 kV/cm for $30{\mu}sec$. After fusion subsequent activation were divided into three groups; non-treatment (control) and treatment with 2 mM 6-DMAP or $7.5{\mu}g/ml$ cytochalasin B for 4 hours. Transferred embryos were cultured in PZM-3 (Porcine Zygote Medium-3) in $5%\;CO_2$ and 95% air at $39^{\circ}C$ for 7 day. Apoptosis-related genes (Caspase-3, BCL-2, mTOR, and MMP-2) were analyzed by immunofluorescence staining. There was no significant difference between two different electrofusion stimuli in the cleavage rate; $64.9{\pm}4.8%$ in 1.1 kV/cm and $62.7{\pm}4.0%$ in 1.5 kV/cm. However, blastocyst formation rate (%) was significantly different among three different activation groups (no treatment, 2 mM 6-DMAP or $7.5{\mu}g/ml$ cytochalasin B) combined with electrofusion of 1.1 kV/cm. The blastocyst formation rate was $12.6{\pm}2.5$, $20.0{\pm}5.0$, and $34.9{\pm}4.3%$ in control, 2 mM 6-DMAP, and $7.5{\mu}g/ml$ cytochalasin B, respectively. Immunofluorescence data showed that expression levels of caspase-3 in SCNT embryos undeveloped to blastocyst stage were higher than those in the blastocyst stage embryos. Expression levels of Bcl-2 in blastocyst stage embryos were higher than those in the arrested SCNT embryos. These results showed that the combination of an electric pulse (1.1 kV/cm for $30{\mu}sec$) and $7.5{\mu}g/ml$ cytochalasin B treatment was effective for production of the porcine SCNT embryos.

• Journal of Biomedical Engineering Research
• /
• v.20 no.2
• /
• pp.231-236
• /
• 1999

Understanding the exgenous water induced thermomechanical effect on the dental hard tissue by the Q-switched Er:YAG laser (1-$mutextrm{s}$-long pulse width) has an important impact on the further understanding of the free-running Er:YAG laser (250-$mutextrm{s}$-long pulse width) ablation on the dental gard tissue because one macroscopic effect in the free-running laser is an accumulation of microscopic effects we investigated in this study. The Q-switched Er:YAG laser with exogenous water on the tooth enhanced ablation rate compared to the case of no water on the tooth. The frequency of exogenous-water jet on the tooth has affected the ablation rate in such a way that as we dispensed water drops less frequently we could get more enhanced ablation rate. The amplitude of the recoil pressure depends on the tooth surface conditions such that as surfaces wet, and as the volume of the exogenous water drop increased, the amplitude of the recoil pressure increased also. From this study we realized that the 1 $mutextrm{s}$ long pulsed induced thermomechanical effect provides us useful information for the understanding of the free-running Er:YAG laser induced ablation with exogenous water.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.10-10
• /
• 2010

가시광역에서 80% 이상의 높은 투과율과 전기전도성을 동시에 갖는 투명전도성 산화물(TCO) 박막은 LCD, PDP, OLED, 태양전지 등의 다양한 분야에 투명전극재료로서 사용되고 있다. 이들 TCO 박막은 Magnetron sputtering, Chemical vapor deposition, Pulse laser deposition, Ink jet등과 같은 다양한 방법으로 증착할 수 있지만, 대면적의 기판에 균일한 박막형성 및 박막과 기판의 높은 부착력등 양산성의 관점에서 우월성을 가지고 있기 때문에 생산라인에서는 DC magnetron sputtering법이 주로 사용되고 있다. 이 경우, 산화물 박막의 미세구조, 내부응력, 광학적 및 전기적 특성은 스퍼터링 과정에서 발생하는 고에너지 입자들의 기판입사 충격에 크게 의존하기 때문에 고품질의 TCO박막을 제작하기 위해서는 증착공정인자들의 제어는 매우 중요한 것으로 알려져 있다. 대표적 TCO박막재료로서 $In_2O_3$계, ZnO계 및 $SnO_2$계를 들 수 있으며, 이들 중에서 Sn을 $In_2O_3$에 치환고용시킨 ITO박막의 경우, 전기적 및 광학적 특성이 상대적으로 우수하기 때문에 실용화 TCO박막으로서 가장 널리 사용되고 있다. 한편, Flexible display의 경우, 유연성의 폴리머기판위에 증착되는 TCO박막에 대하여 요구되는 특성으로는 높은 투과율 및 낮은 비저항은 물론, 박막표면의 평활도 (낮은 표면조도), bending에 대한 높은 기계적 특성 (낮은 내부응력), 수분침투에 대한 높은 barrier특성 및 저온공정 등을 들 수 있다. 그러나 높은 전기전도도를 가지는 ITO박막을 제작하기 위해서는 $200^{\circ}C$ 이상의 증착온도가 필요하며, 이때 얻어진 다결정의 ITO박막은 높은 표면조도 및 bending시에 낮은 기계적 내구성이 문제점으로 지적되고 있다. 한편, 기판가열 없이 증착한 비정질 ITO박막은 낮은 표면조도, 높은 엣칭속도 및 양호한 식각특성을 나타내지만, 상대적으로 높은 비저항 및 기판과의 낮은 부착력 등이 지적되고 있다. 따라서 본 강연에서는 비정질 ITO박막의 결정화 온도 (약 $160^{\circ}C$) 이상에서도 비정질 구조를 유지하기 때문에 낮은 표면조도와 높은 엣칭속도를 가지면서 상대적으로 전기적 특성과 기계적 내구성이 개선된 새로운 고온형 비정질 TCO박막에 대한 최근의 연구성과를 소개하고자 한다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.5
• /
• pp.346-354
• /
• 2002

The present study is to investigate the propagation characteristics of the impulse waves discharged from the exit of the convergent and divergent pipes. An experiment is carried out using a shock tube with an open end and is compared to the computation of the axisymmetric, compressible, unsteady Euler equations, which are solved by the second-order total variation diminishing (TVD) scheme. For the computational work, several initial compression waves are assumed inside the pipe so that those are the same to the experimental ones of the shock tube. The results show that the peak pressures of the impulse waves discharged from the exit of convergent and divergent pipes decrease with an increase in the wavelength of the initial compression wave. All of the impulse waves have a strong directivity toward the pipe axis, regardless of the exit type of the pipe employed. The impulse waves discharged from the divergent pipe are stronger than those from the straight pipe, while the impulse waves of the convergent pipe are weaker than those from the straight pipe. It is found that the convergent pipe can play a role of a passive control to reduce the peak pressure of the impulse wave. The present computations represent the experimented impulse waves with a good accuracy.

• Clinical and Experimental Pediatrics
• /
• v.46 no.12
• /
• pp.1235-1241
• /
• 2003

Purpose : We assessed the dynamic characteristics of 16 nebulizer/compressor combinations currently available in Korea. Methods : The 16 nebulizer/compressor combinations(Pariboy Type 38/Long life, Pariboy Type N/Long life, Pariboy Type N/Salter 8900, Pariboy Type N/LC, Devilbiss pulmoaid-LT/Hudson, Devilbiss pulmoaid/Hudson, Mesmed neb-300/Own, San-up 3040/Hudson, Midas(Basic)/Own, AirJolie 2/Hudson, Thomas 1127/Salter 8900, Noel NE-2000/Salter 8900, Omron CX3/Hudson, Chang Woo CWN-100/Salter 8900, Voyage/Mefar, Chang Woo ASI-Pro/Medel jet pulse) were evaluated in terms of particle size and mass output. In addition, we determined the effects of nebulizer fill volume on mass output. Results : Pariboy Type N/Long life has the highest respirable mass of 0.184 mg/min and Mesmed Neb-300/Own has the lowest 0.019 mg/min. Pariboy Type N/Long life has the highest mass output of 0.68 mg/min and the shortest mass median aerodynamic diameter(MMAD) of $3.76{\mu}m$. All combinations other than Pariboy Type N/Long life produced a MMAD of over $5{\mu}m$. MMAD over a 5 min nebulization ranged 3.76 to $9.83{\mu}m$. There were no significant effects of fill volume on mass output. Conclusion : We concluded that there is a wide variation in performance of nebulizer/compressor combinations. The characteristics of nebulizer/compressor combinations should be considered in selecting products.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1972.03a
• /
• pp.7-8
• /
• 1972

The effects of noise exposure are of two types: Nonauditory effects and auditory effects. Nonauditory effects of noise exposure are interference with communication by speech, sleeping and emotional behavior. The noise will cause the high blood pressure and rapid pulse, also that decrease the salivation and gastric juice. in experimentaly showed that the Corticoid hormon: Gonatotropic hormone were decrease and Thyrotropic hormoone is increase. Auditory effect of noise exposure. when the normal ear is exposed to noise at noise at hamful intensities (above 90㏈) for sufficiently long periods of time, a temoral depression of hearing results, disappearing after minutes or hours of rest. When the exposure longer or intesity greater is reached the Permanent threshold shift called noise-induced hearing loss. Hearing loss resulting from noise exposure presents legal as well as medical problems. The otologist who examines and evaluates the industrial hearing loss cases must be properly informed, not only concerning the otologic but also about the physical and legal aspects of the problems. The measurement of hearing ability is the most important part of a hearing conservation, both preplacement and periodic follow-up tests of hearing. The ideal hearing conservation program would be able to reduce or eliminate the hazardous noise at its source or by acoustic isolation of noisy working area and two ear protections (plugs and muff type) were developed for personal protection.