• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계합동학술대회 논문집
• /
• pp.224-228
• /
• 2002

In this study, the piezoelectric ceramics PZT powder was synthesized by the Wet-Dry combination method. Flexible 1-3 type composite specimens were fabricated with the piezoceramics PZT filler phase and Eccogel polymer matrix phase. This paper represents the pulse-echo response of the 1-3 type composite transducer to check it out to investigate a basic property regarding a level limit switch. The acoustic impedance of 1-3 type composite was improved than that of single phase PZT ceramics. The pulse-echo response of transducer fabricated with the self-made 1-3 type composites resonator was better than that of the solid PZT transducer.

• 한국자기공명학회논문지
• /
• 제3권1호
• /
• pp.27-35
• /
• 1999

Quadrupolar interaction is a strong line broadening agent for nuclei of half-integer spin except the central line. The two-pulse quadrupolar echo technique is widely used, which refocuses the quadrupolar broadening. Echo formation is due to the cancellation of quadrupolar broadening effect by the applied two pulses. Since the central line is not quadrupolar broadened, it should not be involved in the echo formation. However, the central line peak always appears in experiments. This is explained qualitatively here by close examination on the time development of individual coherence. This explanation is used to predict the number of echoes that will be formed with 2 pulse sequence for nuclei of I=3/2, 5/2, 7/2, 9/2 with ease.

• Smart Structures and Systems
• /
• 제29권2호
• /
• pp.301-309
• /
• 2022

Protective coatings are most widely used anticorrosive structures for steel structures. The corrosion under the coating damages the host material, but this damage is completely hidden. Therefore, a field-applicable under-coating-corrosion visualization method has been desired for a long time. Laser ultrasonic technology has been studied in various fields as an in situ nondestructive inspection method. In this study, a comparative analysis was carried out between a guided-wave ultrasonic propagation imager (UPI) and pulse-echo UPI, which have the potential to be used in the field of under-coating-corrosion management. Both guided-wave UPI and pulse-echo UPI were able to successfully visualize the corrosion. Regarding the field application, the guided-wave UPI performing Q-switch laser scanning and piezoelectric sensing by magnetic attachment exhibited advantages owing to the larger distance and incident angle in the laser measurement than those of the pulse-echo UPI. Regarding the corrosion visualization methods, the combination of adjacent wave subtraction and variable time window amplitude mapping (VTWAM) provided acceptable results for the guided-wave UPI, while VTWAM was sufficient for the pule-echo UPI. In addition, the capability of multiple sensing in a single channel of the guided-wave UPI could improve the field applicability as well as the relatively smaller size of the system. Thus, we propose a guided-wave UPI as a tool for under-coating-corrosion management.

• Computers and Concrete
• /
• 제6권3호
• /
• pp.225-234
• /
• 2009

Dredged silt from reservoirs in southern Taiwan was sintered to make lightweight aggregates (LWA), which were then used to produce lightweight aggregate concrete (LWAC).This study aimed to assess the compressive strength and homogeneity of LWAC using ultrasonic-echo sensing. Concrete specimens were prepared using aggregates of four different particle density, namely 800, 1100, 1300 and 2650 kg/$m^3$. The LWAC specimens were cylindrical and a square wall with core specimens drilled. Besides compressive strength test, ultrasonic-echo sensing was employed to examine the ultrasonic pulse velocity and homogeneity of the wall specimens and to explore the relationship between compressive strength and ultrasonic pulse velocity. Results show that LWA, due to its lower relative density, causes bloating, thus resulting in uneven distribution of aggregates and poor homogeneity. LWAC mixtures using LWA of particle density 1300 kg/$m^3$ show the most even distribution of aggregates and hence best homogeneity as well as highest compressive strength of 63.5 MPa. In addition, measurements obtained using ultrasonic-echo sensing and traditional ultrasonic method show little difference, supporting that ultrasonic-echo sensing can indeed perform non-destructive, fast and accurate assessment of LWAC homogeneity.

• 수산해양기술연구
• /
• 제35권3호
• /
• pp.284-290
• /
• 1999

This paper describes a Frequency Shift Keying (FSK) modulator and demodulator and the experimented underwater data ommunication equipment to transfer the analog echo signal in real-time from an underwater vehicle to the mother ship. The system consists of an echo signal transfer unit equipped to the vehicle and an ultrasonic receiver equipped on the ship. The former includes an ultrasonic transceiver unit of 180kHz for echo detection and a continuous wave transmitter of 50kHz with a FSK modulator for echo transmission to the ship. The latter includes an ultrasonic receiver of 50kHz and the FSK demodulator. The results of experiment are as follows. 1. The characteristics of the FSK modulating and demodulating circuits designed with the use of C-MOS IC 4046 was good and confirmed its usefulness in underwater data communication system.2. The prototype ultrasonic transceiver unit shows profitable driving power while the pulse duration was short less than 3 msec, but it was found that the driving power is not sufficient while the long pulse duration or continuous wave is used. The gain of the ultrasonic receiver was 80 dB and the receiving bandwidth 700Hz (at - 3 dB point).3. It was found that the system designed by the author has some possibility to use in underwater echo transfer.4. At the FSK modulator, the widths of voltage and frequency which represent linearity were 3.5 V, 1600Hz, respectively, at the FSK demodulator 2.6 V, 700Hz, respectively.

• 수산해양기술연구
• /
• 제35권3호
• /
• pp.285-285
• /
• 1999

This paper describes a Frequency Shift Keying (FSK) modulator and demodulator and the experimented underwater data ommunication equipment to transfer the analog echo signal in real-time from an underwater vehicle to the mother ship. The system consists of an echo signal transfer unit equipped to the vehicle and an ultrasonic receiver equipped on the ship. The former includes an ultrasonic transceiver unit of 180kHz for echo detection and a continuous wave transmitter of 50kHz with a FSK modulator for echo transmission to the ship. The latter includes an ultrasonic receiver of 50kHz and the FSK demodulator. The results of experiment are as follows. 1. The characteristics of the FSK modulating and demodulating circuits designed with the use of C-MOS IC 4046 was good and confirmed its usefulness in underwater data communication system.2. The prototype ultrasonic transceiver unit shows profitable driving power while the pulse duration was short less than 3 msec, but it was found that the driving power is not sufficient while the long pulse duration or continuous wave is used. The gain of the ultrasonic receiver was 80 dB and the receiving bandwidth 700Hz (at - 3 dB point).3. It was found that the system designed by the author has some possibility to use in underwater echo transfer.4. At the FSK modulator, the widths of voltage and frequency which represent linearity were 3.5 V, 1600Hz, respectively, at the FSK demodulator 2.6 V, 700Hz, respectively.

• 대한자기공명의과학회:학술대회논문집
• /
• 대한자기공명의과학회 1999년도 제4차 추계학술대회 초록집
• /
• pp.87-87
• /
• 1999

• 비파괴검사학회지
• /
• 제23권5호
• /
• pp.464-474
• /
• 2003

비파괴 시험을 위한 3차원 구조의 초음파 영상에는 다양한 결함을 명백하게 보여줄 수 있을 만큼 상세하고 쉽게 알아볼 수 있는 정보가 제공되어야 한다. 수년 동안 원자력 발전소에서 사용된 금속관에 발견되는 소규모의 균열은 전형적인 결함들인데, 이러한 밀리미터 이하의 균열이나 결함은 최종 3차원 영상에서 묘사되어야만 의미 있는 검사가 될 것이다. 향상된 선명도와 그에 따른 결함의 발견 과정의 한 단계로써, 펄스에코(pulse-echo) 초음파를 사용한 3차원 영상제작 기술을 제안한다. 이 기술은 필요한 스캐닝과 펄스에코 데이터의 처리과정을 통한 검사로 3차원 물체의 3차원 영상을 생성하는데, 2차원 위너필터(Wiener fille.)에 의해 초음파 빔을 선명하게 하는 기술을 포함한다. 제안하는 위너필터는 빔의 전달에서 펄스에코 데이터를 초음파 빔 방향의 수직방향에 따라 필터링한다. 이 3차원 처리과정은 결함의 선명성을 증진시키고 사용자에게 3차원 구조물의 좌우 회전 및 축 회전과 같은 조작 능력을 제공한다. 이러한 조작 능력은 3차원에서 다양한 결함들의 크기와 위치의 분명한 묘사를 가능하게 한다.

• 한국음향학회지
• /
• 제16권2호
• /
• pp.5-9
• /
• 1997

본 논문에서는 chirp 신호를 초음파 신호처리 시스템에 입력시킬 때 반사신호의 진폭을 최대로 얻기위한 chirp 신호의 대역폭을 결정하는 방법을 연구하였다. 초음파 신호처리 시스템에서 반사신호의 S/N 비는 초음파의 전파시에 발생하는 감쇠와 산란에 의하여 매우 낮게된다. Chirp 신호를 사용한 펄스 압축기술은 초음파 반사시스템의 S/N 비를 증가시킬 수 있는 방법중 하나이다. 시뮬레이션 및 실험결과, chirp 신호의 펄스폭이 넓을수록 출력이 증가하였고 동일한 펄스폭과 주어진 초음파시스템의 대역폭에 대한 최대출력은 chirp 신호의 대역폭이 초음파시스템의 대역폭 보다 1.15배 클 때 얻어짐을 확인하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.1261-1266
• /
• 2000

In the impact echo method, a stress pulse is introduced into an object at on accessible surface by a transmitter. The pulse propagates into the test object and is reflected by flaws or interfaces. In this paper, void and crack locations of concrete specimens were detected using impact echo method. In their modal identification procedures, the double least squares solution for Ibrahim Time Domain technique was used.