• 분석과학
• /
• 제10권3호
• /
• pp.216-224
• /
• 1997

순환 전압-전류 그림에서 루비안산의 전기화학적 행동을 조사해 보면, 루비안산은 두 개의 환원 봉우리가 나타나는데, 첫번째 봉우리는 $S^{2-}$ 봉우리와 일치하므로 HgS 생성에 의한 환원 봉우리이며, 두번째 봉우리는 매우 약하며 확인되지 않았다. 시차 펄스 음극 벗김 전압-전류법으로 미량의 루비안산을 정량하는 방법을 고찰하였다. 루비안산의 정량을 위하여 pH 10.0, 붕산염 완충용액을 사용하였고, 최적 조건은 붕산염 완충용액의 농도 0.05M, 축적전위 -0.30V, 축적시간 120초, 그리고 주사속도 10mV/sec이다. 이 때 루비안산의 검출 한계는 $2.7{\times}10^{-8}M$이다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.79-82
• /
• 1997

The current from the feed motor of a machine tool contains substantial information about the machining state. There have been many researches that investigated the current as a measure for the cutting forces. However it has not been reported that indirect measurement of the cutting forces from the current of the feed motor at rest is possible. The cutting force normal to the machined surface influences the machined surface of the workpiece, which makes it necessary to estimate this force to control the roughness of the machined surface. But the unpredictable behavior of the current prevents applying the current to prediction of the cutting state. In this paper, empirical approach was conducted to resolve the problem. Also parametric adaptive and fuzzy logic control strategies are applied to the force regulation problem. As a result, the current is shown to be related to the accumulation of the infinitesimal rotation of the motor, and besides the unpredictable behavior of the current is shown to be caused by the relationship. Subsequently the relationship between the current and the cutting force is identified, and it is presented that control of machined surface using the current of the feed motor at rest is possible.

• 한국정밀공학회지
• /
• 제19권4호
• /
• pp.93-100
• /
• 2002

The current from the feed motor of a machine tool contains substantial information about the machining state. There have been many researches that investigated the current as a measure for the cutting farces. However it has been reported that this indirect measurement of the cutting farces from the feed motor current is only feasible in low frequency. In this research, it was presented that the bandwidth of the current monitoring can be expanded to 130 Hz. And the unusual behavior of the current was examined in this bandwidth. The cross-feed directional cutting force influences the machined surface of the workpiece, which makes it necessary to estimate this force to control the roughness of the machined sulfate. The current exists in the stationary feed motor, and it can give the useful information on the quality of the machined surface. But the unpredictable behavior of the current prevents applying the current to prediction of the cutting state. Empirical approach was conducted to resolve the problem. As a result, the current was shown to be related to the accumulation of the accumulation of the infinitesimal rotation of the motor. rotation of the motor. Subsequently the relationship between the current and the cutting force was identified.

• Journal of Microbiology and Biotechnology
• /
• 제24권1호
• /
• pp.59-69
• /
• 2014

One of the major challenges in metabolic engineering for enhanced synthesis of value-added chemicals is to design and develop new strains that can be translated into well-controlled fermentation processes using bioreactors. The aim of this study was to assess the influence of various fed-batch strategies in the performance of metabolically engineered Pseudomonas putida strains, ${\Delta}gcd$ and ${\Delta}gcd-pgl$, for improving production of medium-chain-length polyhydroxyalkanoates (mcl-PHAs) using glucose as the only carbon source. First we developed a fed-batch process that comprised an initial phase of biomass accumulation based on an exponential feeding carbon-limited strategy. For the mcl-PHA accumulation stage, three induction techniques were tested under nitrogen limitation. The substrate-pulse feeding was more efficient than the constant-feeding approach to promote the accumulation of the desirable product. Nonetheless, the most efficient approach for maximum PHA synthesis was the application of a dissolved-oxygen-stat feeding strategy (DO-stat), where P. putida ${\Delta}gcd$ mutant strain showed a final PHA content and specific PHA productivity of 67% and $0.83g{\cdot}l^{-1}{\cdot}h^{-1}$, respectively. To our knowledge, this mcl-PHA titer is the highest value that has been ever reported using glucose as the sole carbon and energy source. Our results also highlighted the effect of different fed-batch strategies upon the extent of realization of the intended metabolic modification of the mutant strains.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.107.1-107
• /
• 2001

In this paper, a digital signal processing circuit for Position Sensitive Detectors(PSDs) is introduced to substitute the conventional analog signal processing circuit and to compensate disadvantages of the PSD. In general, the analog circuits have the problems such as noise accumulation, sensitivity for environmental changes, and high cost for manufacturing. Moreover, the intrinsic nonlinearity problem of the PSD makes it hard to measure the position accurately because it is difficult to be overcome the problem by using the conventional analog circuits, which can be solved by using the digital signal processing circuit. The circuit is implemented by using a Field Programmable Gate Array (FPGA). The Pulse Amplitude Modulation(PAM) method is used for reducing the environmental noise effect, and a linear interpolation logic is used to compensate the ...

• 한국레이저가공학회지
• /
• 제11권1호
• /
• pp.25-31
• /
• 2008

The characteristics of femtosecond laser ablation of $Al_2O_3$ for prescision microfabrication are studied experimentally. Specifically, the process time during femtosecond laser drilling of microholes with $sub-100{\mu}m$ diameter are investigated for varying laser fluence, scan speed and beam path designs like trepanning with continuously changed start points. The accumulation of sub-micrometer size particles within the hole and the deterioration of edge clarity and roundness for decreasing hole diameter are examined and through process optimization the microdrilling with good hole quality is achieved using a femtosecond laser system (repetitionrate 1 kHz, wavelength 785 nm, pulse duration 185 fs)

• Journal of Photoscience
• /
• 제5권1호
• /
• pp.33-37
• /
• 1998

One macroscopic effect in the free-running Er:YAG laser is an accumulation of microscopic effects. Understanding of the exogenous water induced mechanical effect on the dental hard tissue by the Qswitched Er:YAG laser has an important impact on the further understanding of the free-running Er:YAG laser ablation on the dental hard tissue. The Q-switched Er:YAG laser (1-$\mu$s-long pulse width) was used in the recoil pressure measurement with an aid of water-jet system and a pressure transducer. The amplitude of the recoil pressure depends on the tooth surface conditions (dry and wet) and the volume of the water upon it. Wet surfaces yielded higher recoil pressure than that of dry, surface, and as the volume of the exogenous water drop increased, the amplitude of the recoil pressure increased also.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.453-456
• /
• 1999

The Si-SiO$_2$interface trap and nitride bulk trap distribution of SONOSFET(polysilicon-oxide-nitride-oxide-semiconductor)NVSM(nonvolatile semiconductor memory) cell were investigated by single charge pumping method. The used device was fabricated by 0.35 7m standard logic fabrication including the ONO cell process. This ONO dielectric thickness is tunnel oxide 24 $\AA$, nitride 74 $\AA$, blocking oxide 25 $\AA$, respectively. Keeping the pulse base level in accumulation and pulsing the surface into inversion with increasing amplitudes, the charge pumping current flow from the single junction. Using the obtained I$_{cp}$-V$_{h}$ curve, the local V$_{t}$ distribution, doping concentration, lateral interface trap distribution and lateral memory trap distribution were extracted. The maximum N$_{it}$($\chi$) of 1.62$\times$10$^{19}$ /cm$^2$were determined.mined.d.

• 대한한의학원전학회지
• /
• 제11권2호
• /
• pp.146-168
• /
• 1998

This thesis is a study on the diagnostic theory and methods of Macjin(checking of pulse) as described in the Whang Di Nei Qing. There are four methods of Macjin in this text, namely: Dong Macjin(動脈法), Sam Bu Gu Who Macjin(三部九脈診). In Young Gi Gu Macjin(人迎氣口脈診法), Nei Qing's Gi Gu Macjin(內徑의 氣口脈法). Each method developed in it's own way, but they are all closely related and became the basis of today's Macjin. I examined the methods of Macjin in the Whang Di Nei Qing from a perspective of "change". The main questions of this study are: "What brought about the development of the different methods?". "How do the methods differ?", and "how did these methods evoke into today's Macjin?". The method of Macjin generated spontaneously from the observation and treatment of disease. Dong Macjin was the first method developed and became the basis of subsequent forms of Macjin. The accumulation of medical knowledge and the influence of oriental philosophy fueled the evolution of Macjin. Chronologically, Macjin methods developed starting with Dong Macjin and eventually into Sam Bu Gu Who Macjin. In Young Gi Gu Macjin, and Nei Qing's Gi Gu Macjin. The different methods of Macjin vary in how many pulse points are checked, and were established with simplicity and effectiveness in mind. Dong Macjin involves the checking the whole body. Sam Bu Gu Who Macjin involves nine points. In Young Gi Gu Macjin involves four points. and Nei Qing's Gi Gu Macjin involves two. In it's early development, the checking of a patient's pulse was used to diagnose only localized disorders in comparison with symptoms. It evolved with Oh Jang Mad(五臟脈, five main types of pulse) to be able to check internal organs with the introduction of Nei Qing's Gi Gu Macjin. After the division of Chon Kwan Chuck(寸關尺), it evolved further to be able to make a detailed diagnosis by using the result of pules checks. Nowadays, we can make 28 forms of diagnostic indices from these development. In conclusion, Macjin can be used practically and effectively in the diagnosis of disease. In using three methods of Macjin(In Young Gi Gu Macjin, Nei Qing's Gi Gu Macjin, and today's Gi Gu Macjin, which can determine the whole body's Siate of well-being) in conjunction with Dong Macjin(which helps pinpoint the localized disorder), an exact diagnosis can be obtained. I strongly feel that we should acquire objectivity by accommodating Macjin with modern methods of medicine.

• 한국수자원학회논문집
• /
• 제36권5호
• /
• pp.851-861
• /
• 2003

적설 및 융설모의를 포함하여 소양강댐과 충주댐에 대한 유출모의를 수행하였다. 사용한 모의모형은 탱크모형의 수정 형태로서 직렬 3단 탱크와 맥동 응답함수로 이루어져 있다. 매개변수의 추정에는 컴플렉스 혼합진화 (SCE-UA) 전역최적화 기법을 사용하였다. 적설 및 융설모의를 위하여 유역을 고도별로 4개 영역으로 구분하였으며 고도에 따른 기온감률은 0.6$^{\circ}C$/100m로 하였다. 모의 결과 12∼2월 사이에 이 지역에 내리는 강수는 대부분 눈으로 쌓여 있다가3∼4월에 녹아서 유출되었다. 소양강댐의 3∼4월 평균 유출량은, 융설모의를 하는 경우가 하지않는 경우에 비하여 관측 유출량의 약 1/5이 증가되었다. 충주댐의 경우는 융설 모의로 인하여 관측 평균 유출량의 약 1/4에 이르는 유출량이 증가되었다. 그렇지만 두 댐 모두, 융설을 포함하여 유출을 모의하 였음께도 불구하고, 모의 유출량이 관측 유출량보다 작았다.