• 보존과학회지
• /
• 제25권2호
• /
• pp.161-169
• /
• 2009

본 연구에서는 한국산 시판 4종 한지의 강제적 열화 조건인 습 건열처리를 통하여 한지의 광학적 물리적 특성의 변화를 측정, 비교 검토하여 봄으로써, 현재 시판 한지의 안정성을 규명하고자 하였다. 인공 열화 전후의 비교에서 광학적 물리적 성질은 습열처리보다 건열처리의 경우에서 더욱 감소폭이 컸는데, 백색도, whiteness는 흑피로 제조된 순지에서 가장 크게 감소하였고 불투명도 역시 전체적으로 상승하는 경향 속에 흑피에서 가장 높게 상승하였다. 열단장은 백피의 경우가 최종적으로 가장 높은 강도를 나타냈으며, 인열강도는 흑피에서 급속히 감소하였다. 파열강도는 습열처리의 경우, 열화 후반부에서는 백피와 흑피의 값이 거의 비슷하였으나 내절도는 백피의 경우가 다른 펄프보다 월등히 높아 단순비교는 어려웠지만 열화처리에도 비교적 높은 내절도를 나타내었다. 따라서 흑피가 백피에 비해 열화에 약하다는 것을 알 수 있었다. 또한 이외 다른 펄프를 혼합한 경우는 강도면에서 크게 감소함을 알 수 있었다. 결론적으로 한지는 습도에 비해 온도에 더 민감한 것으로 나타났다. 그러나 가장 높은 관심을 가졌던 묵즙에 대한 농도 및 색상의 열화는 특별한 경향을 발견하지 못하였다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.337-347
• /
• 2006

Papers made from unbleached and bleached bagasse chemimechanical pulp were chemically modified by acetylation. The effects of irradiation on unbleached and bleached also reduced papers of bagasse chemimechanical pulp before and after acetylation were investigated in this study. Chemimechanical pulp was prepared from bagasse and then bleached with hydrogen peroxide. Unbleached and hydrogen bleached pulps were reduced by Sodium borohydride in different procedures. Paper sheets were prepared from pulps and then acetylated using a technical grade of acetic anhydride. Accelerated photo-aging was run on the samples using fluorescent lamps to verify photo-stability of paper sheets before and after pretreatments. Brightness reversion (as Post-color number) and other optical properties of the paper sheets were measured. Efficient inhibition of photo-yellowing of papers made from bagasse CMP was achieved by acetylation. The acetylated unbleached CMP was noticeably photo-bleached during irradiation. Sodium borohydride reduction followed by acetylation had the same effect as acetylation alone at the same degree of reaction time and reductive treatment did not affect the yellowing rate to any great extent. The pre-reduced, acetylated unbleached papers were, however, not brightened during irradiation. Calculation done by Kubelka-Munk equation showed that reductive treatment had little effect in reducing the photo-yellowing of paper made from CMP pulp; a small stabilization effect was observed in the case of bleached CMP, while unbleached CMP was slightly more prone to discolor in the later phase of photo-reversion. The improved stability towards light may was closely related to the decrease in the phenolic hydroxyl content as a result of blocking by acetyl groups during treatment with acetic anhydride. The results support the hypothesis that phenolic hydroxyl has an important role in the process of photo-reversion of high-yield pulps. The results obtained in this study demonstrate that the acetylation of paper manufactured from peroxide bleached Bagasse CMP significantly retards light-induced discoloration. The inhibition of yellowing is connected with a decrease in the phenolic hydroxyl content of both unbleached and peroxide bleached papers.

• 펄프종이기술
• /
• 제42권4호
• /
• pp.71-77
• /
• 2010

To utilize modified pulp fibers in papermaking system, it is necessary to evaluate the interaction between modified fibers and papermaking additives. Fluorescent whitening agent (FWA) is an important additive which has been widely used for production of writing and printing paper. We modified pulp fiber surface by Layer-by-Layer multilayering of polyelectrolytes, and investigated the interaction between these fibers and FWA used in internal addition or surface treatment. Pulp fiber with cationic surface charge showed a good affinity to internal FWA. For FWA in surface sizing agent, whiteness and brightness of paper was dependent on pickup weight and polyelectrolyte type. Pulp fibers with C-starch/PSS multilayer showed better optical properties than poly-DADMAC/PSS treatment. It indicated that polyelectrolyte type in Layer-by-Layer multilayering as well as a good affinity to FWA is important to get better whiteness and brightness.

• Restorative Dentistry and Endodontics
• /
• 제46권3호
• /
• pp.40.1-40.12
• /
• 2021

Objectives: The purpose of this study was to critically evaluate the quality, reliability and educational content of the information of vital pulp treatment videos available on YouTube. Materials and Methods: The keywords "pulpotomy" and "pulp capping" were searched on YouTube on 5th July 2020, until 60 English language videos of each search term with a duration shorter than 15 minutes were acquired. Video characteristics were recorded and Video Power Index (VPI) was calculated. Reliability and educational quality of videos were evaluated using the Modified DISCERN score, the Journal of American Medical Association (JAMA) benchmark criteria and Global Quality Scores (GQS). Videos were categorized by uploading source. Results: Regarding pulpotomy, 31.7% of the videos were uploaded by specialists and 68.3% were directed by non-specialists. In the case of pulp capping, the corresponding percentages were 45% and 55%, respectively. Videos uploaded by specialists had significantly higher modified DISCERN, JAMA and GQS scores compared to those uploaded by non-specialists. Endodontists tended to have the highest reliability and VPI scores. Conclusions: YouTube videos on vital pulp treatment contain low educational quality or incomplete information. Low popularity of dental pulp capping and pulpotomy videos may be attributed to the specialized nature of these procedures. As YouTube represents an important source for patient information about different health topics, reliable informative videos should be uploaded by specialized dental professionals.

• 펄프종이기술
• /
• 제30권2호
• /
• pp.13-23
• /
• 1998

Two major cellulase components purified with sephadex G-75 and DEAE sepharose were applied to bleached kraft pulp to inverstigate the change of fiber properties. Cellulose viscosity was very sensitive to $C_x$ component treatment (more than 15% drop was observed) while being little influenced by $C_1$, component (only 2% drop). Fiber fraction longer than 2mm was reduced by $C_x$ treatment while short fiber fraction was increased greatly by more than 15%. There was little change in fiber length distribution by combined treatment of $C_1$ 1 and $C_x$ at equal. In this case, fine contents increased by more than 2.5% at equivalent refining time. WRV and Density were increased as the amount of $C_1$ or $C_x$ treatment was increased. $C_{x}$ was main cause for increasing them. But the effect fell as enzyme dosage.

• 펄프종이기술
• /
• 제29권1호
• /
• pp.52-61
• /
• 1997

This study was aimed to decrease AOX(Adsorbed Organic Halide Compounds) by applying bleaching methods of A(HNO$_3$ ＋ NaNO$_2$) and $D^{(H/L)}$(dual pH chlorine dioxide bleaching) to conventional OCEDED bleaching stages. And so we investigate the effects of NSA treatment and the influence of production rate of ion species in chlorine dioxide and pulp mixtures according to various pH as well as dual pH on pulp bleaching. Finally the effects of AOC_DED^{(H/L)}ED^{(H/L)}$ bleaching stage were investigated by measuring AOX, brightness, kappa number and viscosity of pulps. A stage was treated by using 4% $HNO_3$ and 0.05~2.0% $NaNO_2$ on pulp and $D^{(H/L)}$ stage was like that pulp mixed with chlorine dioxide solution was adjusted at pH 7.0 and reacted in pulp cosistency 3%, S~20min, $70^{\circ}C$, and then successively for 160~175min at pH 4.0. It was found that suitable $NaNO_2$ addition rate was at 0.6% where the brigtness of pulp was most higher and pulp viscosity was not decreased much. Chlorate ($CIO_3$) was decreased according to pH increase but chlorite($CIO_2$) was highly decreased according to pH increase. And chloride was slightly increased with pH increase. The applying of A and D^{(H/L)}$ bleaching stages to some various multiple bleaching stages ($AOC_DED^{(H/L)}/EopD^{(H/L)} etc.$) had good results that brightness was increased more 2~3% ISO than conventional method(OCEDEopD), but viscosity was dropped by only 1~2cps.

• 대한치과의사협회지
• /
• 제55권8호
• /
• pp.542-555
• /
• 2017

1. Diagnosis Diagnosis of Crack, Direct pulp capping 2. Access opening Find the calcified canal orifice Removal of dentin shelf Obtaining the MB2 canal (MB2, MB3, DB2) 3. Perforation repair during endodontic treatment 4. Removal of the separated files 5. Open apex treatment 6. Void removal on CWT procedure 7. Re-endodontic treatment Removal of restorative material filled in pulp chamber Post removal Identification and removal of residual gutta-perch 8. Surgical endodontic treatment In each case will overview how to use a dental microscope.

• 펄프종이기술
• /
• 제40권4호
• /
• pp.51-58
• /
• 2008

This paper presents the effect of acid treatment on the removal of metals and the brightness of pulp. The bleached kraft pulps, metal-absorbed pulps and recycled pulps((ONP, OCC, MOW, and SC) were treated with the acidic solutions. Among metals in the bleached kraft pulps, Cu, Ca and Mg were removed easily by the acid washing, whereas Fe, Al and Si were not removed. The acid washing also removed distinctly metals from the metal-absorbed pulps. The metals absorbed in pulps reduced the brightness (%, ISO). Especially, Fe was the most detrimental metal. However, the brightness which was decreased by metals was restored to the status quo by the acid washing. The level of metals in recycled pulps was gradually reduced after the first flotation and acid treatment. Hence, the degree of metal removal by the acid washing was mainly dependent upon the kinds of waste pulps and metal ions.

• 대한소아치과학회지
• /
• 제50권1호
• /
• pp.24-34
• /
• 2023

이 연구의 목적은 유치 치수치료가 치아의 상실에 미친 영향과 관련 요인에 대해 후향적으로 분석하는 것이다. 연구에는 단국대학교 부속 치과병원 소아치과에 내원하여 유치 치수치료를 받은 6개월 - 12세의 환자 97명의 167개 치아가 포함되었고, 치수치료와 치아상실에 관련된 정보가 수집되었다. 연구에 포함된 환자는 남자 56명(57.7%), 여자 41명(42.3%), 치아는 유전치 72개(43.1%), 유구치 95개(56.9%)였다. 평균 관찰기간은 106.1 ± 38.7개월이고, 치료 시 연령은 평균 유전치 34.8 ± 15.4개월, 유구치 69.1 ± 25.1개월이었다. 한 악궁에서 한쪽 치아만 치수치료를 시행한 환자의 좌우측 동명치 탈락 또는 발치 시기를 비교하였을 때 치수절제술된 치아가 유의하게 빨리 상실되었다(p < 0.05). 또, 치료 전에 치근단 염증을 보이는 경우, 치수치료 후에도 염증으로 인해 발치할 확률이 유전치에서 증가했고(p < 0.05, Odds Ratio = 11.04), 유구치에서는 그렇지 않았다(p > 0.05). 치수절제술이 시행된 유치는 유전치에서 평균 7.8개월, 유구치에서 평균 8.5개월 조기 탈락하였다. 유치의 조기 탈락은 공간상실과 계승 영구치의 조기 맹출로 이어질 수 있고, 이는 유치의 치수치료 및 치료계획 수립 시 판단기준으로 활용될 수 있을 것으로 보인다.

• Journal of the Korean Wood Science and Technology
• /
• 제18권2호
• /
• pp.25-35
• /
• 1990

To investigate the effects of swelling treatment by ammonia on characteristics of carboxymethy1cellulose(CMC) and CMC solution, the domestic kraft pulp pretreated with 5%, 10%, 15% and 20% $NH_4OH$ solution, was carboxymethylated by the standard method, and then the CMC prepared was tested. The physical properties of CMC and CMC solution, such as degree of substitution, transparency. viscosity, weight increase and solubility, were measured, and the comparison with commercial domestic CMC used as a food additive was done. The results obtained were as follows; 1. In CMC manufactured by standard solvent method, hardwood bleached kraft pulp(LBKP) was more substituted than safwood bleached kraft pulp(NBKP), and viscosity of NBKP was higher than that of LBKP. 2. When ammonia swelling treatment was done, degree of substitution gradually decreased with increasing concentration of $NH_4OH$, and degree of substitution of LBKP decreased with a larger range than that of NBKP. 3. When ammonia swelling treatment was done. transparency of CMC solution from LBKP was hardly effected, but in case of NBKP gradually increased with increasing concentration of $NH_4OH$. 4. When ammonia swelling treatment was done, viscosity of CMC solution was higher than that of CMC solution without ammonia swelling treatment. Especially, CMC of high viscosity could be manufactured in 5%, 10% concentration levels of $NH_4OH$. 5. In CMC manufactured from domestic NBKP, CMC at the range of 0.40 to 0.50 in DS was dispersed easily and quickly dissolved, and CMC at more than 0.50 in DS was dispersed slowly in water solution. 6. In comparison with commercial domestic CMC used as a food additive, CMC manufactured from domestic NBKP was higher in DS, and was lower in viscosity and transparency.