• Journal of Bio-Environment Control
• /
• v.7 no.3
• /
• pp.181-190
• /
• 1998

An elastic analysis under wind load was performed for the double layered plastic greenhouse model developed particularly for minimizing damages under typhoons at Cheju Citrus Research institute in Seagipo city. General EVA film was used for the inner covering and the developed special film which would break the wind pressure down was used for the outer covering. The wind tunnel test showed this special film reduced the wind speed up to 86 to 98% under well controlled situation. Based on the elastic analysis performed in the study, the behavior of the greenhouse was changed significantly due to the boundary conditions. Not like other researchers before we applied dead load of the concrete support to the ground pipe and fixed support boundary conditions at the 4 corner pipes. The analysis shows that the greenhouse was lifted and pulled the pipe out of the ground due to the sucking wind pressure. The behavior of the greenhouse was quite similar to that one real greenhouse failure. Therefore, not only we need to find the realistic boundary conditions for the supports, but also need to find how to rest the pipe supports on the ground without economic loss.

• Journal of Veterinary Clinics
• /
• v.30 no.1
• /
• pp.80-85
• /
• 2013

Twenty one cows in Goyang and Paju cities were referred due to displacement of the abomasum and foreign body in the rumen. Omentopexy and rumenotomy through a right flank celiotomy were performed for treatment of abomasal displacement and the foreign body removal in the rumen. The right paralumbar fossa is clipped and prepared surgically. Local anesthesia is instituted by performing inverted L block. The abdomen was entered through 25 to 30 cm vertical incision in the right paralumbar fossa starting 4 to 5 cm ventral to the transverse processes of the lumbar vertebrae. A 14-gauge needle with rubber tubing attached is inserted to relieve the gaseous pressure and to facilitate further exploration and manipulation. The rumen was gently pulled out of the abdominal cavity and incision was made at the omentum. Rumenotomy was done and retrieved the foreign body. After the rumen was rinsed with sterile saline, the rumen wall was closed by a Lembert suture technique. The omentum was closed by a simple continuous suture. Right flank omentopexy was performed for the surgical correction of abomasal displacement. Recovery results among 21 cows included 9 excellent, 5 good, 2 fair and 5 bad. It was considered that operation of abomasal displacement and foreign body removal in the rumen through right flank celiotomy was a good surgical technique to reduce expenses, surgical pain, and surgery time.

• The Journal of the Korea Contents Association
• /
• v.7 no.9
• /
• pp.1-9
• /
• 2007

Recently, the primary school training courses requires creative human being who is able to solve problem in accordance with rapidly changing society. Accordingly, it needs development of edutainment contents that can develop creativity and heighten educational effect as attracting learner's interest. This paper intends to design educational game which can develop creativity. Method of research is based on the concept of creativity and theory of multiple intelligence. First, I pulled out educational elements of edutainment game which can develop ability to solve synthetic problem and then drew interest elements of edutainment game by combined game with form of cartoon. Secondly, creativity studying area set the 5 learning area of verbal, visual, mathematical, logical and analytic creativity and then, a course of learning was designed to have each 3 details of 5 teaming areas of creativity. Finally, it presented production direction of educational game by combined with 4 elements of the interest that is an avatar, achievement of a mission, a time limit and win a point.

• Journal of Korean Medical classics
• /
• v.25 no.4
• /
• pp.39-55
• /
• 2012

Objective : In order to find the decision system in differentiation of syndromes and treatments, I paid attention to divination by Achillea sibireca. Method : I pulled out the elements of differentiation of syndromes and treatments in Zh$\bar{o}$ng y$\bar{i}$n$\grave{e}$i k$\bar{e}$ xu$\acute{e}$(中醫內科學), Uihagipmun Sanghan(醫學入門 傷寒), Donguibogam Japbyeong(東醫寶鑑 雜病) and compared them with the horoscope in The Book of Changes(周易) from the relativity of both eight principles(八綱) etc and subdivision in the entity of the cosmos (太極內 分化). Result : From this viewpoint, the decision system that has relative references in differentiation of syndromes & treatments on cold diseases(傷寒病) and complexed diseases(雜病) by eight principles etc can be compared with the decision system in divination by Achillea sibireca that the entity of the cosmos(太極) gradually can be breakdown into the positive and negative(陰陽), the positive and negative can be breakdown into four phases(四象), four phases can be breakdown into eight signs of divination(八卦), eight signs of divination can be breakdown into 64 divination signs(64卦). Conclusion : I had found that differentiation of syndromes and treatments and divination by Achillea sibireca have similarity to each other in side of decision system. Those decision systems for clinical use and telling the future has many relative references and are made of multiple structures. Clinician can easily, exactly distinguish similar syndromes of many another diseases through this way.

• Weed & Turfgrass Science
• /
• v.6 no.4
• /
• pp.355-358
• /
• 2017

Amur silver grass, Miscanthus sacchariflorus is one of the promising biofuel weeds. A damage of noctuid pest, Leucapamea askoldis was firstly observed from Amur silver grass in Hwasun silver grass plantation during the survey of insect pests of Amur silver grass in Iksan, Hwasun, and Sancheong plantation areas in Korea. The host of L. askoldis was not known yet in Korea. The L. askoldis damage was observed as larval feeding on newly grown shoots and roots of M. sacchariflorus close to soil surface from early May in 2013. Investigated larval density was $1.6{\pm}1.1per\;m^2$ on April 4 and damage rate of shoots was $0.8{\pm}0.4%$ on May 4, 2013. The larvae bore into shoots of M. sacchariflorus and feed on the inside of plant. The damaged shoots are easily pulled out and distinguished by the boring hole on the shoots. L. askoldis was potential insect pest in M. sacchariflorus plantation areas.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.5
• /
• pp.58-64
• /
• 2001

Recently many informations are transmitted ,md stored as video data, and they are on the rapid increase because of popularization of high performance computer and internet. In this paper, to retrieve video data, shots are found through analysis of video stream and the method of detection of key frame is studied. Finally users can retrieve the video efficiently. This Paper suggests a new feature that is robust to object movement in a shot and is not sensitive to change of color in boundary detection of shots, and proposes the characterizing value that reflects the characteristic of kind of video (movie, drama, news, music video etc,). The key frames are pulled out from many frames by using the local minima and maxima of differential of the value. After original frame(not de image) are reconstructed for key frame, indexing process is performed through computing parameters. Key frames that arc similar to user's query image arc retrieved through computing parameters. It is proved that the proposed methods are better than conventional method from experiments. The retrieval accuracy rate is so high in experiments.

• Archives of Plastic Surgery
• /
• v.38 no.1
• /
• pp.96-101
• /
• 2011

Purpose: In treatment of facial bone fracture, occurred in children, we generally use wires, miniplate, absorbable plate or their combination. These foreign bodies can be palpable, and sometimes may cause infections, and need reoperation for removing. When bone fragments are multiple, small or thin, they are hard to handle and make accurate reduction of all fragments. In these cases, a biodegradable tissue adhesive, Histoacryl$^{(R)}$ (n-butyl-2-cyanoacrylate), can be used as fixation technique for small, multiple, and thin fracture fragments. Methods: 3 years old and 6 years old children, who has comminuted fracture on frontal sinus, we used Histoacryl$^{(R)}$ for fixation of multiple bone fragments. After approaching by coronal incision, we pulled out all bone fragments and reconstructed bone fragments by Histoacryl$^{(R)}$ and fixed those on frontal sinus by absorbable plates. Results: Photographs and 3-dimensional CT obtained preoperatively and postoperatively. And we compared them each other in terms of accuracy of reconstructed bony contour. We could reconstruct almost all bone fragments easily along 3-dimensional structure and get excellent aesthetic results. There was no complication such as infection. Conclusion: In treatment of comminuted facial bone fracture, occurred in children, Histoacryl$^{(R)}$ is an excellent method for accurate reconstruction in small and thin bone fragments which cannot be fixed by wire, miniplate or absorbable plate without complication.

• Fashion, Industry and Education
• /
• v.14 no.2
• /
• pp.1-10
• /
• 2016

In the present study, the materials, sizes, and designs of blind eye patch products of skin-adhesive type and glass-attachment type currently available in the market will be analyzed and ergonomically appropriate blind eye patches will be developed. Although these skin-adhesive type eye patches were easy to use, they had shortcomings such as skin troubles due to the adhesive used on the weak and sensitive skin of children and the fact that eyebrows are pulled out and the skin is irritated when the eye patches are detached after being attached. The non-adhesive type eye patches were blind patches to be worn by putting into glasses. These products were made using diverse materials such as neoprene, non-woven fabrics, and felt and showed differences in tactile impressions and irritation to the skin depending on material characteristics. In addition, most products were efficient in blocking light with three-dimensional oval designs comprising darts. In the present study, blind eye patches were designed to reduce skin troubles by using sweat-absorbing and quick-drying functional materials with soft tactile impressions. In addition, to increase the effect to block light and the degree of tight contact with the skin when the blind eye patches are worn compared to existing eye patch designs, the sides of the wings of the blind eye patches were widened, glass frame fixing plates were added, and the darts were made to be curved thereby making an ergonomic design reflecting the shape of the face. The non-adhesive type blind eye patches developed in the present study are considered to enhance the wearing sensation with the use of the material without skin irritation but with cushioning feelings and the ergonomic design reflecting the contour of the face.

• Journal of the Korean institute of surface engineering
• /
• v.47 no.1
• /
• pp.13-19
• /
• 2014

The various surface treated conditions of Fe-3.0%Ni-0.7%Cr-1.4%Mn-X steel such as as-received, ion nitriding, DLC coated, DLC coated after nitriding for 3 hrs and 6 hrs were investigated to evaluate the beneficial effect for plastic mold steel. Micro Vickers hardness tester was used to estimate nitriding depth from the hardness profile and to measure hardness on the surface. Elastic modulus and residual stress were measured by a nanoindentator. Scratch test and SP (small ball punch test) were utilized to assess the adhesive strength of DLC coating. The depth of nitriding layer was measured as $50{\mu}m$ for the condition of 3 hrs nitriding and $90{\mu}m$ for that of 6 hrs nitriding. Hardness, elastic modulus, residual stress of DLC coating were 20.37 GPa, 162.78 GPa and -1456 MPa respectively. Residual stress on the surface of DLC coating after nitriding could increase to -3914 MPa by introducing nitriding before DLC coating. During the 'Ball-On-Disc' test ${\gamma}^{\prime}$ particles pulled out from the surface of nitrized layer tend to enhance abrasive wear mode since the fraction of ${\gamma}^{\prime}$ (Fe4N) in ion-nitrized layer is known to increases with nitriding time. Thus the specific wear rate of the nitriding layer increased. Comparing with nitriding the specific wear rate in work piece disc as well as ball decreased prominently in DLC coating due to the remarkable reduction in friction coefficient.

• Archives of Plastic Surgery
• /
• v.32 no.6
• /
• pp.753-756
• /
• 2005

In the cases of severe arrythmia and conduction failure, a permanent implanted pacemaker is considered an essential treatment modality with less complication rate, broad indications and low morbidity. However, some pacemakers needs to be removed or replaced due to infection, in need of a lead upgrade, elective replacement, conduction failure or insulation failure. The most common indication for pacemaker extraction is infection. Conservative treatments such as administration of intravenous antibiotics and limitation of debridement are not effective and the removal of the entire pacing system is considered to be the best approach to pacemaker pocket infection. Although a locking stylet, a laser sheath and other newer methods of transvenous lead extraction have been proven to be effective, all leads cannot be removed. Moreover, major complications such as, cardiac tamponade and respiratory arrest during leads extraction procedure should not be ignored. We experienced two cases of exposed pacemakers in the subclavicular region. After removing the pacemaker body, exposed proximal lead was pulled out and cut off. The end of remnant external insulation tube was tied to prevent infection propagation between external insulation tube and inner metalic coil. Wounds were covered by local flap coverage. No other problems were detected during the one-year follow-up. Since there are few reports on lead-preserving method of treating limited infection of exposed pacemakers, we would like to present our new method for treating exposed pacemakers.