• 한국운동역학회지
• /
• 제14권2호
• /
• pp.41-55
• /
• 2004

This study analyzed snatch technique in weight-lifting performed by female gold, silver, and copper medalists at the 75kg level in the 2002 Pusan Asian Games and obtained the following conclusions. 1. KSH used more extensor in the waist than those in ankles, knees, or hip joints during the second pull, So further training is required to manifest both each of joints and waist extensor effectively and thus for the line from shoulders through barbell to hip joints to form a smooth vertical pattern. 2. Contrary to those in other countries, Korean athlete KSH tended to be swift in starting but slow in the second pull section, showing less effectiveness in movement during the second pull; therefore, they must try to exert a swift movement in lockout. 3. KSH showed slowdown in the speed, which was a factor interfering with performance during second pull, despite the great maximum speed of moving barbell. It is important to use barbell sufficiently not to reduce the speed of vertical movement but rather to keep the speed increasing. 4. KSH, who kept doing inefficient movements such as failure to perform swift lockout after lifting the heel at the maximum angle of lower limbs, needs to reduce this meaningless extension of ankles, knees, or hip joints to exert energy effectively.

• 대한관절경학회지
• /
• 제13권3호
• /
• pp.254-258
• /
• 2009

경골 과간 융기부 골절은 슬관절의 뒤틀림, 과도한 굴곡 및 신전, 내반 및 외반 손상으로 인한 견열 골절의 형태로 발생을 하며 정확한 해부학적 정복이 이루어지지 않을 경우 슬관절의 불안정성과 관절 운동 제한을 초래할 수 있다. 최근 관절경을 이용한 정복과 다양한 고정 방법이 시행되고 있으며, 저자들은 이 중 견인 봉합술을 시행함에 있어서 도관 나사못을 이용한 터널을 만들어 기존에 시행되어지던 술기에 비해 보다 쉽고 편리하게 내고정을 얻을 수 있었으며, 이에 수술방법의 소개와 증례를 보고하고자 한다.

• 한국지반환경공학회 논문집
• /
• 제4권3호
• /
• pp.27-40
• /
• 2003

본 연구에서는 프리텐션을 적용한 쏘일네일링 공법을 제시하고, 프리텐션 쏘일네일링 시스템에 대한 변위제어방식 현장인발시험을 총 9회 실시하여 프리텐션 쏘일네일링 구조체의 관련 설계변수인 쉬스관 길이 및 고정콘 유 무 등에 대한 영향에 대해 분석하였으며, 아울러 프리텐션 하중의 평가도 다루어 졌다. 또한 응력제어방식 현장인발시험을 총 3회 실시하여, 일반 쏘일네일 및 프리텐션 쏘일네일의 장 단기적인 인발-변형 특성 등을 비교 분석하였다. 계속해서, 프리텐션 쏘일네일링 시스템의 안정성 평가를 위해, 예상파괴면 및 최소안전율을 결정하기 위해 사면안정해석 등에 주로 적용되고 있는 전단강도감소기법을 이용한 수치해석적 접근방법의 제시 및 분석 등이 이루어졌다.

• Archives of Plastic Surgery
• /
• 제34권2호
• /
• pp.237-242
• /
• 2007

Purpose: Gynecomastia is an abnormal increase in the volume of the male breast. Patients affected by gynecomastia with significant glandular enlargement may respond to suction alone and/or sharp dissection and excision. The purpose of this report is to introduce the indications and results of authors' two techniques. Methods: The diameter of parenchyme was determined by a pinch test after liposuction. For the parenchymal diameter less than 4 cm, ultrasound-assisted liposuction was performed, in conjunction with the "pull-out technique" to effectively remove the fibrofatty tissue of the male breast through a single 5-7 mm incision. For the parenchymal diameter more than 4 cm, ultrasound-assisted liposuction and excision were applied through 2.5 cm periareolar approach. Results: A total of 94 patients (185 breasts) underwent the operation from October 2000 to October 2003 and mean follow-up period was 12 months. The volume of aspirates ranged from 50 to 450 cc per breast. There were no major complications such as skin flap necrosis. Five reoperations were performed for 1 hypertrophic scar, 2 under-resected and 2 hematoma cases. The patient's satisfaction was high and most of them were pleased with the shape of the breasts and scars. Conclusion: These procedures can minimize scars and reduce the incidence of contour problem such as saucer deformity, and provides consistent results. Patients can return to full activities in 48 hours. It can be offered as an option for the treatment of gynecomastia.

• Journal of Chest Surgery
• /
• 제54권3호
• /
• pp.186-190
• /
• 2021

Background: Pre-lifting of the sternum marked a major turning point in pectus excavatum repair. The author developed the crane technique in 2002 and successfully applied it to more than 2,000 cases using sternal wire stitching. However, blind sternal suturing limited the use of the wire-stitch crane. We propose a novel screw for sternal lifting as a new tool for the crane technique. Methods: We developed a screw system strong enough to withstand the pressure needed for sternum lifting. The screw was designed to have a broader thread to hold the bony tissue securely. The screw's sustaining power was tested using the torsion, driving torque, and axial pull-out tests in a polyurethane block and ex-vivo porcine sternum. Results: The screws were easily driven into the sternum, and the head of the screw was connectable to the table-mounted retractor. In the torsion test, the 2° offset torsional yield was 4.53 N·m (reference value, 1 N·m). In the polyurethane block driving torque test, the maximum torque was 0.98 N·m (reference value, 0.70 N·m). The axial pull-out test was 446 N (reference value, 100 N). The maximum pull-out resistance in the ex-vivo porcine sternum model was 1,516 N. Conclusion: The screw crane was strong enough to sustain the chest wall weight to be lifted. Thus, the screws could effectively replace the sternal wire stitching in crane pre-lifting of the sternum. We expect that application of the screw-crane will be easy and that it will improve the safety and success rate of pectus repair surgery.

• 대한관절경학회지
• /
• 제3권2호
• /
• pp.132-137
• /
• 1999

목 적 : 관절경하에서 전위된 경골극 골절을 suture hook와 PDS를 이용하여 견인봉합술을 실시하고 그 수술수기와 임상적 결과를 보고하고자 한다. 재료 및 방법 : 1997년 2월부터 1998년 6월까지 견인봉합술을 시행한 12명의 환자중 최소 1년이상 추시관찰이 가능하였던 7명의 환자를 대상으로 하였다. 7예 모두 수상후 3주이내의 급성 손상이며 증상 발현부터 수술까지의 평균 기간은 6.1일이었다. 7예중 4예에서 반월상 연골판파열, 내측 측부 인대손상등의 동반손상이 발견되었고 경골극 골절에 대한 수술시 동반손상에 대한 수술적 치료도 병행하였다. 결 과 : 추시기간은 평균 16.6개월로서, 7례 모두에서 골유합을 얻을수 있었으며 골유합시기는 평균 7.4주였다. 후방십자인대 견열골절 및 외측 반월상 연골판손상이 동반된 환자중 1례에서 관절 운동의 제한이 있었으나 수술후 1년 뒤 관절경적 유착 제거술이후 정상 관절 운동 범위를 보였다. 1명의 환자에서 경도의 전방 불안정성의 소견을 보였으나 자각증세나 일상생활의 제한이 없었다. 결 론 : Suture hook과 PDS를 이용한 관절경적 수술은 골편이 작거나 분쇄골절인 경우에도 해부학적 정복을 얻을수 있고, 조기 재활도 가능하므로 전위된 경골극 골절치료에 있어서 유용한 방법의 하나로 사료된다.

• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 2008년도 제16차 학술대회
• /
• pp.121-121
• /
• 2008

• 한국정보통신학회논문지
• /
• 제25권7호
• /
• pp.955-961
• /
• 2021

현대전에서는 전파를 이용하여 적의 정보를 알아내거나, 적이 탐지하려는 아군 정보를 보호하는 임무를 수행하는 전자전 분야의 중요성이 증가하고 있다. 전자전 분야의 대표적인 전자공격 방법 중 하나인 레이다 재밍기법은 적 레이다를 교란 및 기만하여 아군의 위치 정보가 노출되는 것을 방지한다. 레이다 재밍기법 중 하나인 속도기만 재밍기법은 도플러효과를 이용하여 표적의 속도와 위치를 추적하는 펄스 도플러 레이다를 대상으로 사용된다. 속도기만 재밍기법은 DRFM (Digital Radio Frequency Memory)을 이용하여 수신신호를 주파수 변조해서 송신하는 방법으로 구현할 수 있다. 본 논문은 위상 샘플방식 DRFM을 이용하여 속도기만 재밍기법 중 하나인 VGPO/VGPI 재밍기법을 구현하는 방안을 기술하고, 제작한 보드를 통해서 주입신호 환경 하에서 VGPO/VGPI 재밍기법의 동작을 검증하였다.

• Restorative Dentistry and Endodontics
• /
• 제44권4호
• /
• pp.37.1-37.10
• /
• 2019

Objectives: This study evaluated the bond strength of various fiberglass post cementation techniques using different resin-based composites. Materials and Methods: The roots from a total of 100 bovine incisors were randomly assigned to 5 treatment groups: G1, post + Scotchbond Multi-Purpose (SBMP) + RelyX ARC luting agent; G2, relined post (Filtek Z250) + SBMP + RelyX ARC; G3, individualized post (Filtek Z250) + SBMP; G4, individualized post (Filtek Bulk-Fill) + SBMP; G5, individualized post (Filtek Bulk-Fill Flow) + SBMP. The samples were subjected to the push-out (n = 10) and pull-out (n = 10) bond strength tests. Data from the push-out bond strength test were analyzed using 2-way analysis of variance (ANOVA) with the Bonferroni post hoc test, and data from the pull-out bond strength test were analyzed using 1-way ANOVA. Results: The data for push-out bond strength presented higher values for G2 and G5, mainly in the cervical and middle thirds, and the data from the apical third showed a lower mean push-out bond strength in all groups. No significant difference was noted for pull-out bond strength among all groups. The most frequent failure modes observed were adhesive failure between dentine and resin and mixed failure. Conclusions: Fiberglass post cementation using restorative and flowable bulk-fill composites with the individualization technique may be a promising alternative to existing methods of post cementation.

• 한국운동역학회지
• /
• 제14권2호
• /
• pp.69-83
• /
• 2004

The purpose of this study is searching for technical merits and demerits of each weight lifting player through qualitative motion analysis system. Moreover, It is also analysis the repeating the establishment of exercise purpose and studying for the effect of the field adaptation. The subject of this study was five male weight lifting players who have been engaged in Korean Delegation Team. The institution of exercise target was made through two times qualitative analysis and the result of studying for the effect of the field adaptation was produced before offering feedback. Moreover, two time analysis added after offering feedback. All analysis was based on 2-D visual analysis. The results of this study are as follows: 1. Maximal barbell moving speed in starting phase was decreased after offering feedback. This result implies advancement of technical skills after offering feedback. 2. From starting posture to 앉아받기, forward and backward moving distance of hip joint was decreased after offering feedback in all subjects. This result represents advancement of technical skills after offering feedback. 3. In terms of pull phase, forward and backward moving distance of hip and shoulder joint was decreased after offering feedback in all subjects. This result represents advancement of technical skills after offering feedback. 4. In terms of pull phase, the difference of horizontal value of coordinates was decreased after offering feedback in all subjects. This result represents advancement of technical skills after offering feedback. 5. In terms of pull phase, the motion range of hip joint was decreased after offering feedback in three of five subjects and this represents advancement of technical skills after offering feedback. However, the rest of them were not variable or narrow decreasing. This result represents that feedback system could not brought tremendous effects. 6. From apex point of barbell to 앉아받기, the difference of barbell height was decreased after offering feedback in three of five subjects and this represents advancement of technical skills after offering feedback. However, the rest of them weren't variable or narrow increasing. This result represents that feedback system could not brought tremendous effects. 7. In terms of last-pull phase, the angular velocity of knee joint was increased after offering feedback in four of five subjects and this represents advancement of technical skills after offering feedback. However, the rest of them, only one subject, decreased. This result represents that feedback system could not brought tremendous effects. 8. In terms of last-pull, the conversional tendency of maximal extension to flextion came out all but simultaneously without offering feedback in four of five subjects. This is well-performed technique. Only one subject, however, could not use power effectively because the fact that his maximal extension came out in serial, from ankle to knee and waist means dispersion of power. In addition to, after offering feedback, only one subject made increasing the maximal extension of knee in last-pull and this result represents advancement of skills after offering feedback. However, the rest of them could not make meaningful development after offering feedback. 9. It might be assumed that searching for technical merits and demerits of each weight lifting player through qualitative motion analysis system could improve player's skill.