• 한국터널지하공간학회 논문집
• /
• 제24권4호
• /
• pp.317-326
• /
• 2022

구조용 합성섬유는 작은 비중에 의한 반발률 감소, 지하수 및 해수에 의한 부식 발생의 우려가 없어 강섬유의 대체재로 구조용 합성섬유의 관심이 최근 높아지고 있다. 본 연구에서는 시멘트 복합체의 잔골재 조립률이 구조용 섬유의 인발강도 및 인발에너지에 미치는 영향을 평가하기 위한 실험연구를 수행하였다. 조립률 1.96, 2.69, 3.43인 잔골재로 시멘트 몰탈을 제작하였으며 구조용 합성섬유 1종(polypropylene), 강섬유 1종(hooked ends type)을 대상으로 단일섬유 dog bone shape 공시체를 제작하여 pull-out 실험을 수행하였다. 실험결과 구조용 합성섬유 공시체에서 시멘트 몰탈의 조립률이 증가할수록 인발강도 및 인발에너지가 증가함을 알 수 있었다. 구조용 합성섬유의 경우 시멘트 몰탈과 섬유 사이의 마찰력이 인발메커니즘의 중요인자로 시멘트 몰탈의 잔골재 조립률이 높아질수록 골재 입자가 크고 거칠어지며 섬유와 시멘트 몰탈 사이의 마찰력이 증가하여 섬유의 인발을 억제하기 때문으로 판단된다. 반면, 강섬유 공시체의 경우 시멘트 몰탈 조립률 증가에 따른 인발강도 및 인발에너지의 뚜렷한 경향성은 나타나지 않았다. 이는 강섬유 hooked ends 부분의 기계적 정착이 시멘트 복합체와 강섬유 사이의 마찰력과 비교하여 인발저항력에 미치는 영향이 더 크므로 시멘트 복합체의 잔골재 조립률 변화가 인발저항력에 상대적으로 적은 영향을 미치는 것으로 판단된다.

• 대한토목학회논문집
• /
• 제8권1호
• /
• pp.33-40
• /
• 1988

흙과 보강재 사이의 거동을 측정하는 수단으로서 hollow cylinder type의 샘플 내에 보강재를 인장방향으로 삽입하여 주위압력을 일정하게 유지한 가운데 축력(軸力)을 감소시키는 소위 삼축인장시험을 실시하였다. 인장특성(引張特性)(extensibility)이 상이(相異)한 3종류의 보강재를 사용한 결과 파괴변형율(failure strain), 최대강도후의 응력강소(loss of post-peak strength), 변형모양(deformation mode) 등이 보강재에 따라 각각 독특하였고, 파괴의 양상은 breakage 또는 pull-out 이 발생하였으며, 보강재단(補强材端)의 고정여부에 따라 보강효과가 영향을 받음이 확인되었다. 따라서 보강토해석 및 설계시 흙 및 보강재 자체의 강도(强度)와 더불어 보강재의 인장특성(引張特性)과 경계조건(境界條件)이 매우 중요한 고려요소임을 알 수 있었다.

• 한국재난정보학회 논문집
• /
• 제3권2호
• /
• pp.147-169
• /
• 2007

This study investigates the reinforcing effects of the Multi-bar Spring nails with respect to the conventional Soil-nails in artificial slopes. Based on wide experience related to design and construction, soil nails have been widely applied to reinforce slope in the world. Multi-bar spring nails are one of the improved soil nailing methods. These method maximizes bending, shearing, pull-out resistance for those multi-nails, not unit nail, that are inserted in the borehole using special spacer at regular intervals. In addition, because cutting plane is confined effect resulting from a pressured plate at the end of the nails with compression spring equipment, slope stability is secured using MS-nailing method. Analyzing bending, pull-out, shearing condition of MS-nail, it was examined throughly elastic region, load transfer capacity, reinforcing effect on cutting plate of MS-nails. In addition, Pilot and laboratory tests, numerical analysis were carried out to verify the superiority of MS-nailing method. In case, MS nailing method is applied to reinforce artificial slope, it was analyzed that bending, pull-out, shearing resistance was increased more than existing nailing method was applied. In this study, it was shown that surface failure was more or less prevented using MS-nailing method, confining effect on cutting plane using spring stuck to flexible equipment.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.478-481
• /
• 2004

An experimental investigation on the relationship between corrosion of reinforcement and bond strength in pull-out test specimen has been conducted to establish the allowable limit of rust of reinforcement in the construction field. The reinforcing bars used in this study were rusted before embedded in pull-out test specimen. The first component of this experiment is to make reinforcing bar rust electrically based on Faraday's theory to be 2, 4, 6, 8 and $10\%$ of reinforcing bar weight. For estimation of the amount of rust by weight, Clarke's solution and shot blasting were adopted and compared. Parameters also include 24 and 45MPa of concrete compressive strengths and diameter of reinforcing bar (16, 19 and 25mm). Pull-out tests were carried out according to KS F 2441 and ASTM C 234. Results show that up to $2\%$ of rust increases the bond strength regardless of concrete strength and diameter of reinforcing bar. As expected, the bond strength increases as compressive strength of concrete increases and the diameter of bar decreases.

• Steel and Composite Structures
• /
• 제8권5호
• /
• pp.361-388
• /
• 2008

The Eurocode 4 presents some negative aspects in the design of composite slabs by the m-k Method or the Partial Connection Method. On one hand, the component chemical adherence is not accounted for in the connection between the profiled steel sheet and the concrete. On the other hand, the application of these methods requires some fitting parameters that must be determined by full scale tests. In this paper, the Eurocode 4 methods are compared with a method developed at the Federal Polytechnic School of Lausanne, based on pullout tests, which can be a valid alternative. Hence, in order to calculate the necessary parameters for the three methods, several tests have been performed such as the full scale test described in Eurocode 4 and pull-out tests. This last type of tests is of small dimensions and implicates lower costs. Finally, a full-scale test of a steel-concrete composite slab with a generic loading is presented, with the goal of verifying the analytical formulation.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.23-28
• /
• 2001

Since non-corrosive Fiber Reinforced Polymer(FRP) tendons have been in increasing use for underground and coastal structures constantly contacted with fresh water or sea water because of their superiority to metallic ones in corrosion-resistance, new non-metallic anchoring system for FRP tendons has been developed and investigated to verify the effectiveness of tendon force, which consist of mainly FRP pipes and Highly Expansive Mortar(HEM). The major factors considered in this experiment were expansive pressures of HEM during its hydration, sleeve lengths and types, and anchoring methods of tendon. New anchoring system were investigated from the pull-out tests. The pull-out procedures of the FRP tendons in the various pipe filled with HEM were analyzed and improved ideas were suggested to develop novel non-metallic anchoring system for FRP tendons The pull-out tests for the FRP tendon and new non-metallic anchoring system were conducted. The results show that non-metallic anchoring system for the FRP tendon has been more stablized due to the gradual expansive pressrure of HEM, as tims goes. Since tile lower stiffness of FRP pipes causes the weakness of anchoring force, it requires the increase of stiffness using a carbon fiber or an increased section area.

• Structural Engineering and Mechanics
• /
• 제5권4호
• /
• pp.339-353
• /
• 1997

Fiber reinforced plastic (FRP) rods provide certain benefits over steel as concrete reinforcement, such as corrosion resistance, magnetic and electrical insulation, light weight, and high strength. FRP composites can be combined with a steel core to form hybrid reinforcing rods that take advantage of properties of both materials. The objective of this study was to characterize the bond behavior of hybrid FRP rods made with braided epoxy-impregnated aramid or poly-vinyl alcohol FRP skins. Eleven rod types were tested using two concrete strengths. Specific topics examined were bond strength, slip, and type of failure in concentric pull-out tests from concrete cubes. From analysis of identical pull-out tests on both hybrid and steel rods, information on relative bond strength and behavior were obtained. It is concluded that strength is similar but slip in hybrid rods is much higher. Hybrid rods failed either by pull-out or splitting the concrete block (with or without yielding of the steel core). Experimental data showed consistency with similar test results presented in the literature.

• 한국지반공학회지:지반
• /
• 제10권3호
• /
• pp.119-134
• /
• 1994

균열점토에 대한 강섬유 사용 가능성을 평가하기 위하여 균열이 있는 보강점토와 비보강점토 시료에 대한 일축압축실험을 실시하였다. 실험결과 강섬유 보강으로 인하여 균열의 시작과 진행에 대한 저항력에 증가하므로써 균열 시작시 응력과 파괴시 극한응력이 증가되었다. 균열의 시작과 진행에 대한 저항력의 증가는 점토시료에서 강섬유에 의한 균열진행의 억제 또는 진행방향의 변경과 관련되어 있음을 알 수 있었다. 파괴역학 이론과 섬유로 보강된 물질에서의 일반미케니즘을 적용하여 실험결과에 대한 이론적인 해석이 이루어졌다. 해석결과 강섬유의 인발작용을 통한 연결효과로 인하여 시료에서 균열의 진행에 대한 저항력이 증가됨을 알 수 있었다. 이론적인 분석에 의하여 예측된 인발력은 인발실험으로 부터 산정된 값과 비교적 잘 일치되었다.

• 한국안전학회지
• /
• 제17권2호
• /
• pp.85-91
• /
• 2002

A research on the performance of retrofit anchors was conducted using adhesives for rehabilitation. From the pull-out tests of the chemical anchors, the effect of the hole diameter, spacer, temperature, moisture, embedment depth, and aging time were investigated. The spacer did not directly increased the pull-out load hilt increased post-yielding resistance therefore the ductility of the retrofit anchors. When the hole was cleaned and dried after the immersion, the pull-out load was greatly increased compared to the wet hole. A design equation was unposed depending on the embedment depth of the anchor bolt.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.405-411
• /
• 2008

The pressurized grouting soil nailing method using rubber membrane packer system was developed for recycling materials to minimize environmental pollution and reducing construction costs. For this purpose, field pull-out tests were performed to evaluate the characteristics of soil nailing by measuring tensile stresses and axial displacements.