• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2001년도 연료전지심포지움 2001논문집
• /
• pp.37-42
• /
• 2001

The electrooxidation of methanol was studied using Pt, PtNi(1.1 and 3:1), PtRuNi and PtRu(1:1) alloy nanoparticles in sulfuric acid solution for application to a direct methanol fuel cell. The PtNi and PtRuNi alloys showed excellent catalytic activities compared to those of pure Pt and PtRu. The role of Ni in the electrocatalytic activity was investigated using cyclic voltammetry (CV), chronoamperometry (CA), X-ray photoelectron spectroscopy (XPS). The XPS data confirm that the chemical states of Pt are exclusively metal as well as the presence of metallic Ni, NiO, $Ni(OH)_2$, NiOOH, metallic Ru, $RuO_2$, and $RuO_3$. Negative shifts of the binding energies of Pt for the PtNi alloy nanoparticles were determined by XPS measurements. This can be explained based by assuming that the enhanced activities of PtNi alloys for methanol electrooxidation were caused by the oxide states of Ni and by the change in the electronic structure of Pt component in the alloys.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.174-174
• /
• 1999

Pt(001)의 깨끗한 표면은 재배열된 (5x20) 또는 (nxn) 구조를 갖는다. 이러한 재배열된 구조는 소？의 가스를 흡착에 대해서도 (1x1)구조로 다시 재배열되는 재배열인 쉽게 풀리는 준안정적 재배열 구조를 갖는 표면이다. Pt(100) 표면 위에 Ni과 같은 금속을 흡착시키는 경우도 동일하게 표면의 장력을 해소시켜 (1x1) 표면을 만든다. Pt와 Ni과 같은 덩어리 상태에서 Pt와 Ni가 질서있게 교차되어 배열되는 합금이 쉽게 이루어지는 물질들로 잘 알려져 있고, 이 합금은 Pt나 Ni와 동일한 규칙적인 fcc 구조를 갖는다. 따라서 Pt(100) 표면 위에 Ni를 흡착시키는 것은 Nm/Cu(100)과 같은 표면합금이나 Mn/Ag(1000에서 보이는 2층으로 된 표면 합금과 같은 표면 근방에 국한된 질서있는 표면 합금의 가능성이 있다. 또한 Ni/Pt(100)은 Ni과 Pt가 3대 1의 비로 조합될 때 나타나는 Ni3Pt의 층별구조인 표면에 Ni가 채워져 있고, 다음 층에 Ni와 Pt가 50%씩 질서 있게 섞여 있는 형태의 구조 즉 표면 밑 합금이 나타날 수 있는 가능성이 있는 물질계라는 점에서 관심을 갖게 한다. 본 연구는 LEED를 이용하여 Ni/Pt(100) 박막의 층별구조를 확인하고자 한다. PtNi 합금은 ATA(average t-matirx approximation)을 이용한 LEED 분석이 잘 적용되는 물질계로 알려져 있고, 본 연구는 ATA를 적용한 LEED I/V 분석을 통하여 Ni가 성장된 Pt(100) 표면의층별 농도비와 층별 구조를 구하고자 한다. 실험은 기본 압력이 3x10-11torr인 챔버에서 이루어졌으며, 증착시 압력은 5x10 torr이고, 증착은 열증발 방법을 이용하였다. Ni가 증착됨에 따라 (nxn) 재배열 표면에 기인한 extra spot들의 세기는 점차 감소하고 특정 증착량 이상에서부터 이 (nxn)의 spot들이 사라지고 깨끗한 (1x1) 패턴이 나타난다. 계속되는 증착량의 증가에 대해서도 이 (1x1) 형태는 유지되며, 표면의 질서에 따르는 c(2x20 패턴은 보이지 않았다. (1x1) LEED spot를 보임에도 불구하고 덩어리 절단 형태의 구조를 기반으로 한 LEED I/V 분석으로는 잘 맞출수 없었다. 이것은 Ni가 일정 이상 흡착된 경우 그 구조가 덩어리 절단 형태의 fcc(100) 구조와 벗어난 구조를 가지는 것으로 보인다.

• 한국수소및신에너지학회논문집
• /
• 제32권5호
• /
• pp.285-292
• /
• 2021

To study the effect of the mixture ratio of Ni-Pt nanocatalysts on water electrolysis characteristics in anion exchange membrane system, Ni-Pt nanocatalysts were loaded on carbon black by using a spontaneous reduction reaction of acetylacetonate compounds. The loading weight of Ni-Pt nanocatalysts on the carbon black was measured by thermogravimetric analyzer and the elemental ratio of Ni and Pt was estimated by energy dispersive x-ray analyzer. It was found that the loading weight of Ni-Pt nanoparticles was 5.36-5.95 wt%, and the loading weight increased with increasing Pt wt%. As the Ni-Pt loading weight increased, the specific surface area decreased, because Ni-Pt nanoparticles block the pores of carbon black. It was confirmed by BET analysis and dynamic vapor sorption analysis. I-V characteristics were estimated.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2012년도 자성 및 자성재료 국제학술대회
• /
• pp.172-172
• /
• 2012

A Pt-skin $Pt_3Ni$(111) surface was reported to show high catalytic activity. In this study, we investigated the magnetic properties and electronic structures of the various oriented surfaces of bulk-terminated and Pt-segregated $Pt_3Ni$ by using a first-principles calculation method. The magnetic moments of Pt and Ni are appreciably enhanced at the bulk-terminated surfaces compared to the corresponding bulk values, whereas the magnetic moment of Pt on the Pt-segregated $Pt_3Ni$(111) surface is just slightly enhanced because of the reduced number of Ni neighboring atoms. Spin-decomposed density of states shows that the dz2 orbital plays a dominant role in determining the magnetic moments of Pt atoms in the different orientations. The lowering of the d-band center energy (-2.22 eV to -2.46 eV to -2.51 eV to -2.65 eV) in the sequence of bulk-terminated (100), (110), (111), and Pt-segregated (111) may explain the observed dependence of catalytic activity on surface orientation. Our d-band center calculation suggests that an observed enhanced catalytic activity of a $Pt_3Ni$(111) surface originates from the Pt-segregation.

• Journal of Electrochemical Science and Technology
• /
• 제6권3호
• /
• pp.95-105
• /
• 2015

In the present work, Carbon supported Pt₁₀₀, Pt₈₀Sn₂₀, Pt₈₀Ni₂₀ and Pt₈₀Sn₁₀Ni₁₀ electrocatalysts with different atomic ratios were prepared by ethylene glycol-reduction method to study the electro-oxidation of ethanol in membraneless fuel cell. The electrocatalysts were characterized in terms of structure, morphology and composition by using XRD, TEM and EDX techniques. Transmission electron microscopy measurements revealed a decrease in the mean particle size of the catalysts for the ternary compositions. The electrocatalytic activities of Pt₁₀₀/C, Pt₈₀Sn₂₀/C, Pt₈₀Ni₂₀/C and Pt₈₀Sn₁₀Ni₁₀/C catalysts for ethanol oxidation in an acid medium were investigated by cyclic voltammetry (CV) and chronoamperometry (CA). The electrochemical results showed that addition of Ni to Pt/C and Pt-Sn/C catalysts significantly shifted the onset of ethanol and CO oxidations toward lower potentials. The single membraneless ethanol fuel cell performances of the Pt₈₀Sn₁₀Ni₁₀/C, Pt₈₀Sn₂₀/C and Pt₈₀Ni₂₀/C anode catalysts were evaluated at room temperature. Among the catalysts investigated, the power density obtained for Pt₈₀Sn₁₀Ni₁₀/C (37.77 mW/cm² ) catalyst was higher than that of Pt₈₀Sn₂₀/C (22.89 mW/cm² ) and Pt₈₀Ni₂₀/C (16.77 mW/ cm² ), using 1.0 M ethanol + 0.5 M H₂SO₄ as anode feed and 0.1 M sodium percarbonate + 0.5 M H₂SO₄ as cathode feed.

• 청정기술
• /
• 제19권3호
• /
• pp.320-326
• /
• 2013

방사선환원법을 통해 탄소지지체(Vulcan XC-72$^{(R)}$)를 기반으로 한 나노사이즈의 PtRu-Ni/VC와 PtRu-Sn/VC를 합성하였다. 합성된 촉매는 투과전자현미경(transmission electron microscopy, TEM), 주사전자현미경-에너지 분산형 분석기(scanning electron microscopy-energy dispersive spectroscopy, SEM-EDS), X선 광전자 분광기(X-ray photoelectron spectroscopy, XPS), X선 회절(X-ray diffraction, XRD)을 통해 촉매의 표면과 구조 및 성분에 대해 특성평가 되어졌으며, 촉매 전기화학적 효율 및 안정성 대한 평가를 위하여 산소 환원 반응, 메탄올 산화반응과 CO 흡착 효율을 E-TEK사에서 상용촉매로 판매되는 PtRu/VC$^{(R)}$ (60 wt% PtRu)와 비교하였으며, 이에 대한 요약은 다음과 같다. 수소 흡 탈착 반응 : PtRu-Sn/VC > PtRu-Ni/VC > PtRu/VC$^{(R)}$ (E-TEK). 메탄올산화반응 : PtRu-Sn/VC > PtRu-Ni/VC > PtRu/VC$^{(R)}$ (E-TEK). 단위셀 효율 : PtRu-Sn/VC > PtRu-Ni/VC > PtRu/VC$^{(R)}$ (E-TEK).

• 한국수소및신에너지학회논문집
• /
• 제33권3호
• /
• pp.202-208
• /
• 2022

Pt-Ni nanocatalysts were loaded on carbon black by spontaneous reduction reaction of platinum (II) acetylacetonate and nickel (II) acetylacetonate, and they were characterized by transmission electron microscopy (TEM), thermogravimetric analyzer (TGA), energy dispersive x-ray analyzer (EDS), BET surface area and fuel cell test station. The distribution of the Pt and Ni nanoparticles was observed by TEM, and the loading weight of Pt-Ni nanocatalysts on the carbon black was measured by TGA. The elemental ratio of Pt and Ni was estimated by EDS. It was found that the loading weight of Pt-Ni nanoparticles was 5.54 wt%, and the elemental ratio of Pt and Ni was 0.48:0.35. Specific surface area was measured by BET analysis instrument and I-V characteristics were estimated.

• 한국수소및신에너지학회논문집
• /
• 제23권1호
• /
• pp.1-7
• /
• 2012

This study was performed to develop a low Pt content catalyst as a catalyst for HI decomposition in S-I process. Bimetallic catalysts added various amounts of Pt on a silica supported Ni catalyst were prepared by impregnation method. HI decomposition was carried out using a fixed bed reactor. As a result, Ni-Pt bimetallic catalyst showed enhanced catalytic activity compared with each monometallic catalyst. Deactivation of Ni-Pt catalyst was not observed while deactivation of Ni monometallic catalyst was rapidly occurred in HI decomposition. The HI conversion of Ni-Pt bimetallic catalyst was increased similar to Pt catalyst with increase of the reaction temperature over a temperature range 573K to 773K. From the TG analysis, it was shown that $NiI_2$ remained on the Ni(5.0)-Pt(0.5)/$SiO_2$ catalyst after the HI decomposition reaction was decomposed below 700K. It seems that small amount of Pt in bimetallic catalyst increase the decomposition of $NiI_2$ generated after the decomposition of HI. Consequently, it was considered that the activity of Ni-Pt bimetallic catalyst was kept during the HI decomposition reaction.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2011년도 임시총회 및 하계학술연구발표회
• /
• pp.129-129
• /
• 2011

The limited understanding of the surface properties of $Pt_3Ni$ for the oxygen reduction reaction (ORR) in polymer electrolyte membrane fuel cell (PEMFC) has motivated the study of properties and electronic structures of seven layered $Pt_3Ni$ (001), (110), and (111) surfaces. The first principle method based on density functional theory (DFT) is carried out. It is found that the bulk $Pt_3Ni$ has a ferromagnetic ground state with the ordered fcc type L12 structure, which is in good agreement with other results. Non magnetic Pt has the induced magnetic moment due to the strong hybridization between 3d Ni and 5d Pt. The magnetic moment of Pt and Ni enhanced on the surface of each due to surface effect however the magnetic moment of surface Pt in the Pt-segregated Pt3Ni (111) decreased and the magnetic moment of Ni in Ni rich subsurface increased significantly. The calculated d band centers of Pt explain the possibilities for oxygen absorption and play the important roles in altering the catalytic properties. The spin polarized densities of states are presented in order to understand physical properties of Pt in different surfaces in detail.

• Korean Chemical Engineering Research
• /
• 제58권4호
• /
• pp.658-664
• /
• 2020

Zeolite HY is wet impregnated with Ni (0.1, 0.3, 0.4, 0.5 wt%), Pt (0.1 wt%) and reduced in presence of hydrogen to form nanosized particles of Ni and Pt. All the catalysts were characterized by XRD, TEM, ESCA, NH₃-TPD, Pyridine adsorbed FT-IR and BET. Characterization results confirm that the Ni and Pt fractions effectively rehabilitated the physio-chemical properties of the zeolite HY catalysts. Further, all the reduced catalyst were screened with hydroisomerization of m-xylene at LHSV = 2.0 h^-1 in the temperature range 250-400 ℃ in steps of 50 ℃ in hydrogen atmosphere (20 ml/g). The addition of Ni to Pt catalyst increases hydroisomerization conversion, as well as maximizes p-xylene selectivity by restricting the pore size. The increasing trend in activity continues up to 0.3 wt% of Ni and 0.1 wt% Pt addition over zeolite HY. The increasing addition of Ni increases the total number of active metallic sites to exposed, which increases the metallic sites/acid sites ratio towards the optimum value for these reactions by better balance of synergic effect for stable activity. The rate of deactivation is pronounced on monometallic catalysts. The results confirm the threshold Ni addition is highly suitable for hydroisomerization reaction for product selectivity over Ni-Pt bimetallic/support catalysts.