• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2003년도 연료전지심포지움 2003논문집
• /
• pp.83-88
• /
• 2003

PtRu alloy and $PtRu-WO_3$ nanocomposite thin-film electrodes for methanol electrooxidation were fabricated by means of a sputtering method. The structural and electrochemical properties of well-defined PtRu alloy thin-film electrodes were characterized using X-ray diffraction, Rutherford backscattering spectroscopy. X-ray photoelectron spectroscopy, and electrochemical measurements. The alloy thin-film electrodes were classified as follows: Pt-based and Ru-based alloy structure. Based on structural and electrochemical understanding of the PtRu alloy thin-film electrodes, the well-controlled physical and (electro)chemical properties of $PtRu-WO_3$, showed superior specific current to that of a nanosized PtRu alloy catalyst, The homogeneous dispersion of alloy catalyst and well-formed nanophase structure would lead to an excellent catalytic electrode reaction for high-performance fuel cells. In addition, the enhanced catalytic activity in nanocomposite electrode was found to be closely related to proton transfer in tungsten oxide using in-situ electrochemical transmittance measurement.

• 대한치과기공학회지
• /
• 제25권1호
• /
• pp.63-70
• /
• 2003

The microstructure and hardness of a porcelain fused Au-Pt-Cu-In alloy was investigated using optical microscopy, secondary electron microscopy, electron probe microanalyzer, transmission electron microscope, and vickers hardness. The hardness of the heat-treated Au-Pt-Cu-In quartenary alloy reached a maximum value in 30 min at 550$^{\circ}C$ in the range of 150 to 950$^{\circ}C$. In the aged Au-Pt-Cu-0.5In alloy at 550$^{\circ}C$, the hardness of the alloy rapidly increased until 30min with increasing aging time and after that it was remained nearly constant value. Based on above results, glazing and final aging of the porcelain fused Au-Pt-Cu-0.5In alloy were performed at 920 and 550$^{\circ}C$, respectively. The hardness of Au-Pt-Cu-0.5In alloy glazed at 920$^{\circ}C$ was 90 Hv and that of the alloy aged for 30 min at 550$^{\circ}C$ increased to 160 Hv. This indicates that a ceramic-metal crown with high strength can be manufactured using the glazing at 920$^{\circ}C$ and followed final aging at 550$^{\circ}C$ for 30 min.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.403-403
• /
• 2010

The Pt-Ni alloy is an electro-catalyst of interest in the low temperature direct methanol fuel cells(DMFCs). It has been already reported that the Pt-Ni alloy catalysts may even have enhanced activity compared to pure platinum catalyst, depending on how the surfaces are prepared. The order-disorder transition in bimetallic alloy such as $\beta$-CuZn, Cu3Au, and CuAu have been investigated greatly by x-ray diffraction. After annealing the bimetallic alloy, the crystal structure changes as observed in the order-disorder transition of Cu3Au which changes from the face centered cubic to a simple cubic structure. Pt-Ni bimetallic alloy has been already reported to have the face centered cubic structure. However, in nano-scale Pt-Ni bimetallic alloy crystals the crystal structures changes to a simple cubic structure. In this experiment, we have studied the order-disorder transition in Pt-Ni bimetallic nanocrystals. Pt/Ni thin films were deposited on sapphire(0001) substrates by e-beam evaporator and then Pt-Ni alloy were formed by RTA at 500, 600, and $700^{\circ}C$ in a vacuum environment and Pt-Ni nano particles were formed by RTA at $1059^{\circ}C$ in a vacuum environment. We measured the structure of Pt-Ni bimetallic alloy films using synchrotron x-ray diffraction and SEM.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.335-338
• /
• 1997

Platinum-Cobalt alloy thin films were deposited on A1$_2$O$_3$substrate by magnetron cosputtering for RTD temperature sensors with wide temperature ranges. We made Pt-Co alloy resistance patterns on the A1$_2$O$_3$substrate by lift-off method and fabricated Pt-Co alley RTD temperature sensors by using Pt-wire, Pt-paste. We investigated the physical and electrical characteristics of theme films under various conditions, input power, working vacuum, annealing temperature and time, and also after annealing these films. The resistivity and sheet resistivity of these films were decreased with increasing the annealing temperature. At input power of Pt : 4.4 W/cm$^2$, Co : 6.91 W/cm$^2$, working vacuum of 10 mTorr and annealing conditions of 800$^{\circ}C$ and 60 min, the resistivity and sheet resistivity of Pt-Co thin films was 15${\mu}$$\Omega$$.$cm and 0.5$\Omega$/ , respectively, and the TCR value of Pt-Co alloy thin films with thickness of 3000${\AA}$ was 3740ppm/$^{\circ}C$ in the temperature range of 25∼600$^{\circ}C$. These results indicate that Pt-Co alloy thin films hove potentiality for the RTD with wide temperature ranges.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2002년도 연료전지심포지움 2002논문집
• /
• pp.179-182
• /
• 2002

The electrooxidation of methanol was studied using Pt, PtRu(1:1), PtNi(1:1), PtRh(1:1) and PtOs(1:1) alloy nanoparticles for application as electrocatalysts. The effects of the second metals in the electrocatalytic activity was investigated using cyclic voltammetry (CV), chronoamperometry (CA), X-ray photoelectron spectroscopy (XPS). There are the metallic and oxygen states in the PtRu and PtOs electrocatalysts . In the XPS of PtRu and PtOs alloy nanoparticles, the oxygen sources were dominant as the second metal's effects. Negative shifts of the binding energies of Pt for the PtNi, PtRh alloy nanoparticles were determined by XPS measurements, which can be explained by electronic effects.

• 한국입자에어로졸학회지
• /
• 제8권2호
• /
• pp.83-88
• /
• 2012

The electrical wire explosion process in liquid media is promising for nano-sized metal and/or alloy particles. The hybrid Pt/Fe-Cr-Al and Pt/Ni-Cr-Fe nanoparticles for exhaust emission control system are synthesized by electrical wire explosion process in liquid media. The alloy powders have spherical shape and nanometer size. According to the wire component, while Pt/Fe-Cr-Al nanoparticles are shown the well dispersed Pt on the Fe-Cr-Al core particle, Pt/Ni-Cr-Fe nanoparticles are shown the partially separated Pt on the Ni-Cr-Fe core particle. Morphologies and component of two kinds of hybrid nano catalyst particles were characterized by transmission electron microscope and energy dispersive X-ray spectroscopy analysis.

• 한국자기학회지
• /
• 제12권1호
• /
• pp.20-23
• /
• 2002

CoCrPt 합금박막의 국소보자력 분포를 400nm공간분해능으로 8000개의 국소영역을 동시에 측정할 수 있는 광자기 현미경 자력계로 관찰하였다. 시료들은 dc 마그네트론 스퍼터링 방식으로 Pt 함량을 6 at.%에서 28 at.%로 변화시키며 제작되었다. Pt 함량이 증가함에 따라 ,국소보자력 분포가 정규분포에서 비정규분포로 변화하며 국소보자력 분포폭이 증가함을 발견하였다. 투과전자현미경으로 관찰한 미세구조를 분석한 결과는 국소보자력 분포 변화가 결정립의 크기 분포 및 평균크기 변화와 깊이 연관되어 있음을 나타내었다.

• 한국진공학회지
• /
• 제7권3호
• /
• pp.176-186
• /
• 1998

Si 기판 위에 3종의 Pt-Co 합금박막 (Pt66-Co34, Pt40-Co60, Pt18-Co82)과 순수한 Pt, Co 박막 시료를 제작하여 표면 조성분석의 정량화 및 표준화를 위한 표준시료로 제안하 였다. in-istu X-ray photoelectron spectroscopy(XPS)분석에 의해 증착된 이원 합금박막의 조성이 정확히 조절되었으며, 합금박막의 실제 조성은 유도결합플라즈마-원자방출분광법 (inductively coupled plasma-atomic emission spectroscopy: ICP-AES)과 러더퍼드 후방산 란분광법(Ruthford back-scattering spectrometry: RBS)에 의해 결정되었다. in-situ XPS 결과와 ICP에 의한 조성을 비교한 결과 매질 효과를 고려하면 비교적 정확한 조성을 구할 수 있음이 확인되었다. 이 시료를 이용한 XPS와 Auger electron spectroscopy(AES)에 의한 국내 공동분석 결과는 약4%내외의 큰 편차를 보이고 있지만, 평균 조성 값은 약1%의 오차 범위 내에서 두 방법에 의한 결과가 서로 잘 일치하였다. 이온빔 스퍼터링에 의해 Pt조성이 증가된 표면층이 형성되어 정확한 조성분석을 위해서는 선택스퍼터링에 의한 표면 변형을 정량적으로 함을 알았다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.133-133
• /
• 2013

For both oxygen reduction (ORR) and hydrogen oxidation reactions (HOR) of proton electrolyte membrane fuel cells (PEMFCs), alloying Pt with another transition metal usually results in a higher activity relative to pure Pt, mainly due to electronic modification of Pt and bifunctional behaviour of alloy surface for ORR and HOR, respectively. However, activity and stability are closely related to the preparation of alloy nanoparticles. Preparation conditions of alloy nanoparticles have strong influence on surface composition, oxidation state, nanoparticle size, shape, and contamination, which result from a large difference in redox priority of metal precursors, intrinsic properties of metals, increasedreactivity of nanocrystallites, and interactions with constituents for the synthesis such as solvent, stabilizer, and reducing agent, etc. Carbon-supported Pt-Ni alloy nanoparticles were prepared by the borohydride reduction method in anhydrous solvent. Pt-Ru alloy nanoparticles supported on carbon black were also prepared by the similar synthetic method to that of Pt-Ni. Since electrocatalytic reactions are strongly dependent on the surface structure of metal catalysts, the atom-leveled design of the surface structure plays a significant role in a high catalytic activity and the utilization of electrocatalysts. Therefore, surface-modified electrocatalysts have attracted much attention due to their unique structure and new electronic and electrocatalytic properties. The carbon-supported Au and Pd nanoparticles were adapted as the substrate and the successive reduction process was used for depositing Pt and PtM (M=Ru, Pd, and Rh) bimetallic elements on the surface of Au and Pd nanoparticles. Distinct features of the overlayers for electrocatalytic activities including methanol oxidation, formic acid oxidation, and oxygen reduction were investigated.

• 대한의용생체공학회:의공학회지
• /
• 제24권3호
• /
• pp.203-208
• /
• 2003

인듐함량에 따른 Au-Pt-Cu 삼원계합금의 미세조직 및 기계적 특성을 광학현미경, 시차주사열분석기, SEM, XRD, EPMA 그리고 미소경도계를 이용하여 조사하였다. 인듐함량이 0.5 wt% 인 Au-Pt-Cu-0.5In 사원계 합금을 온도범위 150~95$0^{\circ}C$에서 열처리한 결과 55$0^{\circ}C$/3O분 열처리한 시료의 경도 값이 가장 높게 나타났고, 55$0^{\circ}C$에서 시효시간을 증가시킴에 따라 30분에서 최고 경도치에 도달된 후 거의 일정하게 유지되었다 또한, 55$0^{\circ}C$에서 30분 동안 시효 처리한 Au-Pt-Cu 삼원계합금의 미세조직은 인듐 함량이 증가함에 따라 결정립이 미세화 되었다. XRD, EPMA을 이용하여 Au-Pt-Cu-In 사원계 합금에 존재하는 석출상을 분석한 결과 모상은 fcc구조를 갖는 Au-Pt-Cu 고용체, 석출상은 Ll$_2$구조를 갖는InPt$_3$ 석출물로 판명되었다. 이러한 연구결과로부터 인듐 함량에 따른 Au-Pt-Cu-In 합금의 경도증가는 결정립 미세화에 의한 강화 효과와 InPt$_3$ 형태의 석출물에 의한 석출강화 효과에 기인하는 것으로 해석된다.