• Journal of the Korean Ceramic Society
• /
• v.37 no.11
• /
• pp.1097-1104
• /
• 2000

MOD(Metal-Organic-Decomposition)법에 의해 $Y_2$O$_3$버퍼층에 Pt/TiO$_2$/SiO$_2$/Si 기판 위에 제조한 후, 그 표면 위에 졸-겔 방법으로 YMnO$_3$박막을 형성하였다. 기판의 종류와 수화조건 변화가 YMnO$_3$박막의 결정화 거동에 미치는 영향을 고찰하였으며, 또한 $Y_2$O$_3$버퍼층 유.무에 따른 Mn의 산화상태를 확인하고 이에 따른 유전특성 변화를 연구하였다. $Y_2$O$_3$버퍼층을 삽입하지 않고 직접 기판 위에 형성한 YMnO$_3$박막의 결정상은 기판의 종류 및 Rw 변화에 관계없이 orthorhombic 구조임이 확인되었다. 반면, $Y_2$O$_3$버퍼층 위에 형성된 YMnO$_3$박막의 경우에는 Rw($H_2O$/alkoxide mole ratio)가 0~6 범위 내에서 낮아질술고 hexagonal 결정상 성장에 유리하였으며, 또한 Pt(111)/TiO$_2$/SiO$_2$/Si 기판이 Ptd(200)/TiO$_2$/SiO$_2$/Si에 비하여 결정상 형성에 용이하였다. $Y_2$O$_3$버퍼층은 YMnO$_3$결정상 내에서 $Mn^{4+}$ 이온형성을 억제함으로써 누설전류밀도가 크게 감소되는 효과를 주었으며, 동시에 강유전 특성을 지닌 hexagonal 결정상 형성에 유리하게 작용하였다. 결론적으로, $Y_2$O$_3$는 Pt가 코팅된 Si 기판 위에 YMnO$_3$박막 제조시 그 강유전 특성을 향상시켜주는 우수한 버퍼층 재료임을 확인하였다.

• Korean Journal of Materials Research
• /
• v.7 no.2
• /
• pp.93-101
• /
• 1997

Lead titanate박막을 $Pt/Ti/SiO_{2}/Si(Pt/Ti기판)와\;Pt/Ta/SiO_{2}/SiO_{2}$Si(Pt/Ta 기판) 위에서 전자 사이크로트론 공명플라즈마 화학증착법(ECR PECVD)으로 증착하였다. 증착온도, 산소유입량, MO source유입비등의 증착변수에 따른 lead titanate박막의 조성과 미세구조를 주사전자현미경(SEM), 투과전자현미경(TEM), X선 회절법(XRD)으로 조사하였다. 산소유입량이 적을 경우,Tisource와 Pb source의 산소화의 반응성 차이 때문에 Pb 농도가 부족한 화학양론비가 잘 맞는 박막이 증착되었다. Pt/ti기판은 lead titanate박막증착도중 기판의 Ti층과 Pt층의 확산으로 기판변형이 발생하는 반면, Pt/Ta기판은 기판변형이 일어나지 않았다. Pt/Ta기판에서 페롭스카이트 화학양론비를 갖는 매우 평탄한 lead titanate박막을 증착 하였는데, 산소유입량이 lead titanate박막의 결정성을 크게 지배하였다.

• Journal of the Korean Vacuum Society
• /
• v.7 no.1
• /
• pp.17-23
• /
• 1998

$Pb(Fe_{0.5}Nb_{0.5}O_3(PFN)$ thin films were prepared by rf magnetron co-sputtering method on $SiO_2/Si$, ITO/glass, and $Pt/Ti/SiO_2/Si$ substrates and post-annealed at the $N_2$ atmosphere by RTA(rapid thermal annerling). The degree of crystallinity of PFN films was identified on various substrates. Electrical properties of PFN films was characterized for $Pt/PFN/Pt/Ti/SiO_2/Si$ structure. The composition of PFN films was estimated by EPMA (electron probe micro analysis). PFN films would be crystallized better to perovskite phase on ITO/glass substrate than $SiO_2/Si$ substrate. This may be induced by the deformation of Pb deficient pyrochlore phase due to Pb diffusion into $SiO_2/Si$ substrate. PFN films on $Pt/Ti/SiO_2/Si$ substrate. PFN films with 5-10% Pb excess were crystallized to perovskite phase from $500^{\circ}C$ temperature. In summary, we show that Pb composition and annealing temperature were critically influenced on crystallinity to perovskite phase. When PFN film with 17% Pb excess was annealed at $600^{\circ}C$ at the $N_2$ atmosphere for 300kV/cm and 88. Its remnant polarization coercive field $2.0 MC/cm^2$ and 144kV/cm, respectively.

• Journal of the Korean Vacuum Society
• /
• v.9 no.3
• /
• pp.227-232
• /
• 2000

$MgTiO_3$thin films have been grown on various substrates by pulsed laser deposition (PLD) to investigate the application for microwave dielectrics and optical devices. Epitaxial $MgTiO_3$thin films were obtained on sapphire (c-plane$A1_2O_3$$MgTiO_3$thin films deposited on $SiO_2/Si$ and platinized silicon ($Pt/Ti/SiO_2/Si$) substrates were highly oriented. $MgTiO_3$thin films grown on sapphire were transparent in the visible and had a sharp absorption edge about 290 nm. These $MgTiO_3$thin films had extremely fine feature of surface morphology, i.e., rms roughness of 0.87 nm, which was examined by AFM. We have investigated the dielectric properties of the $MgTiO_3$thin films in $MIM(Pt/MgTiO_3/Pt)$ capacitors. Dielectric constant and loss of $MgTiO_3$thin films deposited by PLD were about 24 and 1.5% at 1 MHz, respectively. These $MgTiO_3$thin films also exhibited little dielectric dispersion.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1997.05a
• /
• pp.58-58
• /
• 1997

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.1
• /
• pp.34-38
• /
• 1999

$PbTiO_3$(PT)thin films were prepared by simultaneous of $TiO_2$ and PbO on Si(100) substrate using metaloganic chemical vapor deposition (MOCVD). Titanium tetra-isopropoxide (TTIP) and $Pb(TMHD)_2$were used as source materials. As evaporation temperature and flow rate of TTIP were examined the crystal structure of PT thin films using XRD with setting deposition temperature, flow rate of Pb, and total flow rate of $520^{\circ}C$, 30 sccm, and 750 sccm, respectively. PT thin films could be deposited under 48~$50^{\circ}C$ and 18~22sccm of evaporation temperature and flow rate of TTIP, respectively. It was found that lead, oxygen, and silicon diffused at the iaterface between the film and the substrate.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.9
• /
• pp.711-717
• /
• 1998

BST(70/30) and BST(50/50) thin films were prepared by Sol-Gel method and studied about the microstructural and dielectric properties with Pt and ITO bottom electrodes. The stock solution was synthesized and spin coated on the Pt/Ti$SiO_2$/Si and Indium Tin Oxide(ITO)/ glass substrate. the coated films were dries at 350$^{\circ}C$ for 10 minutes and annealed at $750^{\circ}C$ for 1 hour for the crystallization. The thin films coated on ITO substrate were crystallized easily and the packing density and roughness of surface were better that those of films coated on Pt substrates. In the BST(50/50) composition the structural properties were similar to the BST(70/30) composition and grain size were decreased with increasing the contents of Sr. The dielectric constant was higher in the BST(50/50) composition compared with the BST(70/30) composition. Using the ITO substrate, the dielectric constant was higher than the Pt substrate while the dielectric loss was showed a reverse trend. The dielectric constant with and increase of temperature was decreased slowly.

• Korean Journal of Materials Research
• /
• v.4 no.2
• /
• pp.143-151
• /
• 1994

On PT/Ti/Si substrates, PZT thln fllms are deposited at $300^{\circ}C$ by rf magnetron sputtering uslng a $(PbZr_{52}, Ti_{48})O_{3}$ composltc cerarnlc target. To abtaln, the stable phase, perovskltc structure, furnace annealmg techmque had been cmplo:~d In PbO amb~ent for the $550^{\circ}C$-$750^{\circ}C$ temperature ranges. On Pt(250$\AA$)/Ti(500$\AA$)/Si, Pt(1000)$\AA$/Ti(500$\AA$)/Si substrates, effects of Ti layer and Pt thickness are studled. Though thickness of the Pt layer 1s 1000$\AA$). oxygen diffusion is not prevented and accelerated by Ti layer actlng for oxygen sink sites durmg furnace annealing. The upper TI layer 1s transformed Into TIOX by oxyen dlffuslon and lower Ti layer Into silicide with in-diffused Pt. The formation of TiOx layer seems to affect the orlentatton of the PZT layer. Furnace annealed f~lm shows ferroelectr~c and electrical properties wth a remanent polarlzation of 3.3$\mu A /\textrm{cm}^2$, , coerclve fleld of 0.15MV/cm, a=571 (10kHz), leakage current 32.65$\mu A /\textrm{cm}^2$, , breakdown voltage of 0.4OMV/cm.

• Journal of the Korean Ceramic Society
• /
• v.40 no.2
• /
• pp.206-211
• /
• 2003

Effects of substrates and buffer layer upon the formation of crystalline phases and ferroelectricity of $YMnO_3$ thin films were investigated. The hexagonal $YMnO_3$ was easily formed on Si(100) while the mixed phases, hexagonal and orthorhombic $YMnO_3$, on $Pt(111)/TiO_2/SiO_2/Si$ substrate. When the $Y_2O_3$ buffer layer of 70 nm thick was inserted between the substrates and the $YMnO_3,$ the c-axis oriented hexagonal single phase formed on both substrates, Si(100) and $Pt(111)/TiO_2/SiO_2/Si$. The leakage current density of the hexagonal $YMnO_3$ thin films was lower than that consisting of mixed phases, hexagonal and orthorhombic. Furthermore the hexagonal $YMnO_3$ with c-axis preferred orientation showed the lowest leakage current density. The remnant polarization from a P-E hysteresis curve for the $YMnO_3$ formed on Si(100) was 0.14 without buffer layer and $0.24_{mu}C/cm^2$ for that with buffer layer. For the $Pt(111)/TiO_3/SiO_3/Si$ substrates, the specimen without $Y_2O_3$buffer layer did not show the hysteresis curve, while the buffer-layered has the remnant polarization of $1.14_{mu}C/cm^2$. It was concluded that the leakage current density and the ferroelectricity for the $YMnO_3$ thin films could be controlled by varying crystalline phases and their preferred orientation which depend on the kind of substrates and whether the $Y_2O_3$buffer layer exist or not.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.68-68
• /
• 2000

펄스레이저 증착법(이하 PLD)을 이용하여 마이크로파 유전체 소자 및 절연 산화막으로의 응용을 위한 MgTiO3 박막을 다양한 기판상에서 증착하였다. 사파이어 기판에 (a,c-plane Al2O3) 성장된 MgTiO3 박막은 에피텍셜 성장(epitaxial growth)이 되었으며, SiO2/Si 및 Pt/Ti/Si 기판위세 성장된 MgTiO3 박막의 경우 003방향으로 배향(oriented) 되었다. MgTiO3 박막은 450~75$0^{\circ}C$까지 기판온도를 변화시키면서 증착시켰으며, 증착시 산소분압은 50~200 mTorr로 변화시켰다. PLD 증착시 타켓에 조사된 레이저 에너지 밀도는 약 2J/cm2였으며, MgTiO3 박막 증착후 200Torr O2 분위기에서 상온까지 1$0^{\circ}C$/min 의 속도로 냉각시켰다. 사파이어 c-plane 상에서 일머나잇(ilminite) MgTiO3 구조가 55$0^{\circ}C$ 에피텍셜 성장하는 것을 관찰할 수 있었으며, 사파이어 a-plane 상에서는 MgTiO3 구조가 $650^{\circ}C$ 이상부터 110방향으로 배향되며 성장하였다. $600^{\circ}C$ 이상에서 c-축으로 배향된 구조를 갖고 있었다. 증착된 MgTiO3 박막의 조성분석(stoichio metric analysis)을 위해 RBS 분석을 수행하여, 증착에 이용된 타켓과 동일한 조성을 갖는 MgTiO3 박막이 성장된 것을 확인할 수 있었다. 사파이어 기판상에 증착된 MgTiO3 박막은 가시영역에서 투명하였으며, 약 270nm 파장을 갖는 영역에서 급격한 흡수단을 보였다. 이때의 MgTiO3 박막은 AFM 분석을 통해 약 0.87mn rms roughness 값을 갖는 매우 평탄한 표면구조를 갖고 있는 것을 확인하였다. MIM(Pt/MgTiO3/Pt) 구조의 캐패시터를 형성시켜 MgTiO3 박막의 유전특성(dielectric properties)을 관찰하였다. PLD로 성장된 MgTiO3 박막의 유전율(relative dielectric constant)은 약 22였으며, 1MHz에서 약 1.5%의 유전손실(dielectirc loss) 값을 보였다. 또한 이때 MgTiO3 박막은 낮은 유전분산값을 보였다.