• 천문학논총
• /
• 제11권1호
• /
• pp.1-26
• /
• 1996

We have built a near-infrared imaging camera with a PtSi array detector manufactured by the Mitsubishi Company. The PtSi detector is sensitive in the wavelength range 1 to $5{\mu}m$. Quantum efficiency of PtSi is much lower than that of InSb and HgCdTe types. However, the PtSi array has advantages over the latter ones: (i)The read-out noise is very low; (ii)the characteristics of the array elements arc uniform and stable; (iii)it is not difficult to make a large PtSi array; and (iv) consequently the price is affordably low. The array used consists of $512{\times}512$ pixels and its size is $10.2\;mm{\times}13.3\;mm$. The filter wheel of the camera is equipped with J, H, K filters, and an aluminum plate for measuring the dark noise. The dewar is cooled with liquid nitrogen. We have adopted a method of installing the clock pattern and the observing softwares in the RAM, which Gill he easily used for other systems. We have developed a software with a pull-down menu for operating the camera and data acquisition. The camera has been tested by observing $\delta$ Orionis.

• 대한화학회지
• /
• 제39권1호
• /
• pp.35-39
• /
• 1995

백금과 로듐 모두 미량으로 존재할 때 펄스 차이 폴라로그래피법으로 동시 정량할 수 있는 용액조건을 확립하였다. 포름알데히드 0.004%(w/v)-히드라진 0.0012$(w/v)-황산 0.75 M의 조건에서 가장 예민한 수소 촉매파를 얻을 수 있었다. 이 조건에서 단일 금속의 검출 한계는 $7.3{\times}10^{-11}\; M\; Pt$ 그리고 $3.2{\times}10^{-11}\; M\; Rh$이었다. 이 농도범위에서 로듐(10배 이상)과 이리듐(100배 이상)만이 백금을 방해하였다. 로듐은 어떠한 여타 백금족 원소(1000배 이상의 백금, 500배의 이리듐 존재하에서도)의 방해도 받지 않았다.

• Clinics in Shoulder and Elbow
• /
• 제26권3호
• /
• pp.267-275
• /
• 2023

Background: Physical therapy (PT) plays an important role in the recovery of function following anatomic total shoulder arthroplasty (aTSA). While several PT protocols have been published for these patients, there is no standardized protocol for aTSA rehabilitation. This lack of standardization may lead to confusion between patients and physicians, possibly resulting in suboptimal outcomes. This study examines how PT protocols provided by academic orthopedic surgery programs vary regarding therapeutic goals and activities following aTSA. Methods: PT protocols for aTSA available online from the Accreditation Council for Graduate Medical Education accredited orthopedic surgery programs were included for review. Each protocol was analyzed to evaluate it for differences in recommendation of length of immobilization, range of motion (ROM) goals, start time for and progression of therapeutic exercises, and timing for return to functional activity. Results: Of 175 accredited programs, 25 (14.2%) had protocols publicly available, programs (92%) recommended sling immobilization outside of therapy for an average of 4.4±2.0 weeks. Most protocols gave recommendations on starting active forward flexion (24 protocols, range 1-7 weeks), external rotation (22 protocols, range 1-7 weeks), and internal rotation (18 protocols, range 4-7 weeks). Full passive ROM was recommended at 10.8±5.7 weeks, and active ROM was 13.3±3.9 weeks, on average. ROM goals were inconsistent among protocols, with significant variations in recommended ROM and resistance exercise start times. Only 13 protocols (52%) gave recommendations on resuming recreational activities (mean, 17.4±4.4 weeks). Conclusions: Publicly available PT protocols for aTSA rehabilitation are highly variable. Level of evidence: IV.

• Bulletin of the Korean Chemical Society
• /
• 제15권1호
• /
• pp.37-45
• /
• 1994

$(NH_4)_{4.5}[H_{3.5}{\alpha}-PtMo_6O_{24}]{\cdot}1.5\;H_2O(A),\;(NH_4)_4[H_4{\beta}-PtMo_6O_{24}]{\cdot}1.5\;H_2O(B),\;and\;K_{3.5}[H_{4.5}{\alpha}-PtMo_6O_{24}]{\cdot}3\;H_2O(C)$ have been synthesized and their molecular structures have been also determined by single-crystal X-ray diffraction technique. The space groups, unit cell parameters, and R factors are as follows: Compound A, monoclinic, $A_{2/a}$, a= 19.074 (3), b=21.490 (3), c=15.183 (2) ${\AA};\;{\beta}$=109.67 (1) ${\AA}$; z=8; R=0.075($IF_0I>4{\sigma}(IF_0I);$ Compound B, triclinic, P$bar{1}$, a=10.776 (2), b=15.174 (4), c=10.697 (3) ${\AA};\;{\alpha}$ =126.29 (2), ${\beta}$=111.55 (2), ${\gamma}$=93.18 (2) ${\AA}$; Z=2; R=0.046($IF_0I>3{\sigma}(IF_0I);$): Compound C, triclinic, Pl, a=12.426 (2), b=13.884 (2), c=10.089 (1) ${\AA}$; ${\alpha}$=102.59 (2), ${\beta}$=110.73 (1), ${\gamma}$=53.93 (1) ${\AA}$; Z=2; R=0.074 ($IF_0I>3{\sigma}(IF_0I)$. Compounds A and C contain the well-known Anderson structure (planar structure) heteropoly oxometalate having approximate $bar{3}_m(D_{3d})$ symmetry, while compound B contains the bent structure heteropoly oxometalate having appproximate $2_{mm}(C2_v)$ symmetry. The bent structure and the planar one are geometrical isomers. These compounds are rot only novel heteroply molybdates containing platinate(IV) but also the first example of geometrical isomerism in the hexamolybdoheteropoly oxometalates. That isomerization surprisingly occurred because of the change of only 0.5 non-acidic hydrogen atom attached to the polyanion such as $[H_{3.5}{\alpha} -PtMo_6O_{24}]^{4.5-}{\to}[H_4{\beta}-PtMo_6O_{24}]^{4-}{\to}[H_{4.5}{\alpha} -PtMo_6O_{24}]^{3.5-}$. It seems that the gradual protonation of the polyanion plays an important role in that isomerism. These heteropolyanions form dimers by strong hydrogen bonds between two heteropolyanions in the respective crystal system.

• 대한화학회지
• /
• 제58권2호
• /
• pp.169-178
• /
• 2014

A new series of metal complexes of V(IV), Pd(II), Pt(IV), Ce(IV) and U(VI) with 3-[(3-chlorophenyl)-hydrazono]-pentane-2,4-dione (Cphpd) were synthesized and characterized by elemental analysis, molar conductivity, magnetic moment measurements, UV-vis, FT-IR and $^1H$ NMR as well as TG-DTG techniques. The data indicated that the Cphpd acts as a bidentate ligand through the hydrazono nitrogen and one keto oxygen. The kinetic parameters have been evaluated by using Coats Redfern (CR) and Horowitz-Metzeger (HM) methods. The thermodynamic data reflected the thermal stability for all complexes. The calculated bond length and the bond stretching force constant, F(U=O), values for $UO_2$ bond are $0.775{\AA}$ and $286.95Nm^{-1}$. The bond lengths, bond angles, dipole moment and the lowest energy model structure of the complexes have been determined with DFT calculations. The antimicrobial activity of the synthesized ligand and its complexes were screened.

• Journal of Photoscience
• /
• 제2권1호
• /
• pp.7-11
• /
• 1995

Powders of artificial crystallites of titanium(IV) oxide, TiO$_2$(B), were synthesized by the calcination of tetratitanic acid (hydrate, $H_2Ti_4O_9H_2O$; TTA). The relating titanates, potassium octatitanate ($K_2Ti_8O_{17}$) and octatitanic acid($H_2Ti_8O_{17}$), were also prepared. These powders, loaded with small amount of Pt, were suspended in an aqueous solution of 2-propanol and irradiated under argon atmosphere at 298 K + 0.5 deg. All the photocatalysts tested in this study produced almost equimolar amount of acetone and molecular hydrogen (H$_2$). Among them TiO$_2$(B) and TYA showed the higher photocatalytic activity but rather lower than commercial titanium(IV) oxide (TiO$_2$) powders. The photocatalytic activity of TiO$_2$(B) for 2-propanol dehydrogenation in deaerated aqueous suspension increased with the elevating calcination temperature. Comparison of rate of H$_2$ formation from methanol and 2-propanol solutions by the TiO$_2$(B) photocatalyst suggested a possibility of selection of substrate with its molecular size by TiO$_2$(B)

• 한국막학회:학술대회논문집
• /
• 한국막학회 1994년도 추계 총회 및 학술발표회
• /
• pp.8-11
• /
• 1994

Disposal of hazardous ions in the aqueous streams is a significant industrial waste problem.. Waste streams from electronics, electroplating, and photographic industries contain metal ions such as copper, nickel, zinc, chromium(IV), cadmium, aluminum, silver, and gold, amongst others in various aqueous solutions such as sulfates, chlorides, fluorocarbons, and cyanides. Typical plating solutions having similar compositions are listed in Table 1. Spent process streams in catalyst manufacturing facilities also contain precious metals such as Ag, Pt, and Pd. Developing an effective recovery process of these metal ions for reuse is important.

• 한국세라믹학회지
• /
• 제40권12호
• /
• pp.1189-1196
• /
• 2003

Sol-gel법으로 강유전성 B $i_{3.25}$L $a_{0.75}$ $Ti_3$ $O_{12}$ (BLT) stock solution을 합성하고 Pt/Ti $O_2$/ $SiO_2$/Si 기판위에 스핀코팅법으로 BLT 박막을 증착하였다. 본 실험에서는 Bi(TMHD)$_3$, La(III)2-Methoxyethoxide, Ti(IV)i-propoxide를 출발물질로 사용하였으며 2-Methoxyethanol을 용매로 사용하였다. 급속열처리(RTA)가 BLT 박막의 결정성장을 촉진시키기 위해 사용되었고, RTA를 실시한 시편과 RTA를 실시하지 않은 시편의 전기적 특성을 비교하였다. RTA를 실시한 후 72$0^{\circ}C$에서 로 열처리 한 BLT 박막의 경우 5V 인가 전압 하에서 2Pr 값은 RTA를 실시하지 않은 경우보다 27% 증가한 20.46$\mu$C/$ extrm{cm}^2$이었다.

• 한국전기전자재료학회논문지
• /
• 제13권9호
• /
• pp.745-750
• /
• 2000

The (S $r_{0.85}$C $a_{0.15}$) Ti $O_3$(SCT) thin films are deposited on Pt-coated electrode (Pt/TiN/ $SiO_2$/Si) using RF sputtering method at various deposition temperature. The crystallinity of SCT thin films were increased with increase of deposition temperature in the temperature range of 200~500[$^{\circ}C$]. Also, the composition of SCT thin films were closed to stoichiometry (1.080~1.111 in A/B ratio). V-I characteristics of SCT thin films show the increasing leakage current with the increases of deposition temperature. The conduction mechanism of the SCT thin films observed in the temperature range of 25~100[$^{\circ}C$] can be divided into four regions with different mechanism by the increasing current. The region I below 0.8[MV/cm]shows the ohmic conduction. The region II between 0.9~2[MV/cm] is in proportion to J∝ $E^{1.5}$ , the region III between 2~4[MV/cm] can be explained by the Child’s law, and the region IV above 4[MV/cm]is dominated by the tunneling effect.ect.

• 센서학회지
• /
• 제23권3호
• /
• pp.170-172
• /
• 2014

$CO_2$ sensor was used only one solid electrolyte in many cases. To improve the sensing characteristics of $CO_2$ sensors, solid electrolyte $CO_2$ sensor has been developed by bi-electrolyte type sensor using Na-Beta-alumina and YSZ. However, in many further studies, bi-electrolyte type sensor was made by pellet pressed by press machine and additional treatment for formation of interface. In the aspect of mass production, using thick film and additional treatment is not suitable. In this study, $CO_2$ sensor was fabricated by bi-electrolyte structure which was made by an NBA paste layer deposited on YSZ pellet and fired at $1650^{\circ}C$ for 2 hour. The formation of stable interface between YSZ and NBA were confirmed by SEM image. When the type IV electrochemical cell arrangement represented by $CO_2,O_2,Pt{\mid}Li_2CO_3-CaCO_3{\parallel}NBA{\parallel}YSZ{\mid}O_2,Pt$ is used to measure the $CO_2$ concentration in air. This sensor EMF should depend only on the concentration of $CO_2$ by logarithmic. Also, sensor shows $P_{CO_2}$ and EMF relationship like nerstian reaction at a temperature of $450^{\circ}C$.