• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1655-1662
• /
• 2018

This paper studies the magnetic fields between the power lines which are finite length and other ones which are infinitely long around the first tower in the proximity of the power transformers. They will be used as a source of disturbance applied to the power line. The method applied in this study was gradual; develop the theoretical formulation of the magnetic fields of these lines which are finite length and other ones which are infinitely long, examine the effects of different couplings between the different neighboring lines and the distribution transformers on behavior of magnetic fields. The method also focused on the experimental results analyzing the magnetic fields which will be used as a source applied to the auditory implants EMC. The theoretical and experimental results were compared and discussed for three power lines (90kV, 150kV and 225kV) near the power station, and it proved the effect of these substations on the simulated and measured results of the magnetic field. The maximum intensities of magnetic fields measured at the height of 1m from the ground for the circuit of three lines close to each substation were significantly lower than the ICNIRP reference levels for occupational and non occupational exposures.

• 전기학회논문지
• /
• 제64권11호
• /
• pp.1651-1657
• /
• 2015

In MHz operating wireless power transfer systems, skin- and proximity-effect losses in the transmitter and the receiver coils dominate the coil-to-coil efficiency of the system. A Litz-wire was regarded as a common solution for minimizing such Ohmic losses in high frequencies. In this paper, equivalent series resistances of 12 different cables including Litz-wire and copper tubing have been calculated and measured for a 6.78 MHz, 100W, 30 cm wireless power transfer system. It has been shown that the copper tubing has lower resistances compared to the Litz-wire in that frequency and a wireless power transfer system with the copper tubing was able to achieve much higher efficiency than a system using the Litz-wire. Calculations of the resistances and efficiencies were accomplished with analytical equations and those calculations were evaluated by experimental results.

• 한국해양공학회지
• /
• 제27권5호
• /
• pp.16-21
• /
• 2013

The flow around a circular cylinder advancing beneath the free surface is numerically investigated using a VOF method. The simulations cover Froude numbers in the range of 0.2~0.6 and gap ratios (h/d) in the range of 0.1~2.0, where h is the distance from the free surface to a cylinder, and d is the diameter of a cylinder at Reynolds number 180. It is observed that the vortex suppression effect and surface deformation increase as the gap ratio decreases or the Froude number increases. The most important results of the present study are as follows. The proximity of the free surface causes an initial increase in the Strouhal number and drag coefficient, and the maximum Strouhal number and drag coefficient occur in the range of 0.5~0.7. However, this trend reverses as the gap ratio becomes small, and the lift coefficient increases downward as the gap ratio decreases.

• Advances in biomechanics and applications
• /
• 제1권1호
• /
• pp.67-76
• /
• 2014

Bone properties are one of the key components when constructing models that can simulate the mechanical behavior of a mandible. Due to the complexity of the structure, the tooth, ligaments, different bones etc., some simplifications are often considered and bone properties are one of them. The objective of this study is to understand if a simplification of the problem is possible and assess its influence on mandible behavior. A cadaveric toothless mandible was used to build three computational models from CT scan information: a full cortical bone model; a cortical and cancellous bone model, and a model where the Young's modulus was obtained as function of the pixel value in a CT scan. Twelve muscle forces were applied on the mandible. Results showed that although all the models presented the same type of global behavior and proximity in some locations, the influence of cancellous bone can be seen in strain distribution. The different Young's modulus defined by the CT scan gray scale influenced the maximum and minimum strains. For modeling general behavior, a full cortical bone model can be effective. However, when cancellous bone is included, maximum values in thin regions increase the strain distribution. Results revealed that when properties are assigned to the gray scale some peaks could occur which did not represent the real situation.

• 설비공학논문집
• /
• 제12권1호
• /
• pp.75-82
• /
• 2000

This paper presents the predicted results by CFD technique of air flow and contaminant distribution in a full-scale kitchen opened to a living room, ventilated by a exhaust hood. To analyze the characteristics of the indoor environment, the concept of contaminant index was defined. In this study, the locations of the gas range and the window were chosen as the parameters to investigate the indoor environment. The values of the contaminant index for several layout of the gas range and the window were calculated and compared. When the gas range is installed along the wall with specified window location, its position in relation to the wall has unnoticed effect on contaminant infer. Once the location of the gas range is fixed, the indoor air quality may deteriorate by the proximity of the window to the gas range. This is due to the shorter distance that external fresh air must travel within the kitchen before it reaches the exhaust fan.

• Structural Monitoring and Maintenance
• /
• 제6권1호
• /
• pp.33-46
• /
• 2019

In present study, Operational Modal Analysis (OMA) was employed to carry out the dynamic and vibration analysis of the threshing unit of the combine harvester thresher as a mechanical component. The main study is to find the causes of vibration and to decrease it to enhance the lifetime and efficiency of the threshing unit. By utilizing OMA, structural modal parameters such as mode shapes, natural frequencies, and damping ratio was calculated. The combine harvester was excited by engine to vibrate different parts and accelerometer sensor collected acceleration signals at different speeds, and OMA was utilized by nonparametric and frequency analysis methods to obtain modal parameters while vibrating in real working conditions. Afterwards, finite element model was designed from the thresher and updated using the data obtained from the modal analysis. Using the conducted analyses, it was specified that proximity of the thresher pass frequency to one of the natural frequencies (16.64 Hz) was the most important effect of vibration in the thresher. Modification process of the structure was carried out by increasing mass required for changing the natural frequency location of the first mode to 12.4 Hz in order to reduce resonance and vibration of the thresher.

• 무역학회지
• /
• 제44권3호
• /
• pp.227-252
• /
• 2019

This study explores the effects of exports on the innovation of Korean firms listed on two Korean stock markets, the Korean Stock Exchange and the Korean Securities Dealers Quotations, between 1999 and 2016. By matching exporting firms to non-exporting ones with propensity score matching, this study accounts for a problem from sample selection bias that may arise from differences in firm-characteristics between the two groups. From the study results, first, both export participation and export volume significantly increase subsequent innovation performance, as measured by the number of patent applications. This result seems to support the "learning by exporting" hypothesis for Korean listed firms. Second, both export participation and export volume narrow innovation scope, proxied as the number of unique International Patent Classification (IPC) codes of the patent applied, the degree to which patents are concentrated in a particular class, and the degree of proximity in the patents. The findings of innovation scope suggest a possible explanation that the learning effect appears in familiar technology fields that firms have previously held, rather than in unfamiliar ones. Third, these results are robust using alternative proxies in the innovation scope, Tobit regressions to consider the non-trivial portion of sample firms with patent applications equal to zeros, and generalized method of moments (GMM) to control for the persistence of innovation measures hearing over years. Finally, the two main results are more pronounced in large firms than in small and medium-sized ones. As for Chaebol firms, however, these results do not appear.

• 한국초전도ㆍ저온공학회논문지
• /
• 제24권4호
• /
• pp.6-10
• /
• 2022

We report on the fabrication and measurements of metallic Josephson junctions (JJs) consisting of Au nanoribbon and NbTi superconducting electrodes. The maximum supercurrent density in the junction reaches up to ~ 3×10⁵ A/cm² at 2.5 K, much larger than that of JJ using single-crystalline Au nanowire. Temperature dependence of the critical current exhibits an exponential decay behavior with increasing temperature, which is consistent with a long and diffusive junction limit. Under the application of a magnetic field, monotonous decrease of the critical current was observed due to a narrow width of the Au nanoribbon. Our observatons suggest that NbTi/Au/NbTi JJ would be a useful platform to develop an integrated superconducing quantum circuit combined with the superconducting coplanar waveguide and ferromagnetic π junctions.

• Journal of Korea Trade
• /
• 제27권5호
• /
• pp.23-40
• /
• 2023

Purpose - This study aims to present the changes and directions in the automotive supply chain in the face of changes in the global supply chain caused by external factors and the integration of industries resulting from internal factors. Assuming FDI in the Korean automotive industry in the US, this study analyzed the influential factors over the long term and derived the optimal location. Design/methodology - For this analysis, the characteristics and current status of the automotive industry are presented. Additionally, the study emphasizes the necessity and direction of change. The factors influencing Korea-US FDI in the automotive industry and the electric vehicle industry were analyzed through panel analysis. The optimal location from the perspective of distribution costs was selected using linear programming under the assumption that local demand will be replaced by local production in the future. Findings - This study found that the electric vehicle supply chain will change with the characteristics of the electric and electronic industries rather than with the traditional automotive industry. Additionally, in deriving the optimal location, the study emphasized the proximity to the consumption market. Originality/value - The analysis method and conclusions of this study not only present the influential factors and direction of FDI in the automotive industry but also can be applied to other industries. Moreover, the study provides practical and policy implications for industries and governments considering FDI in the US.

• 한국경제지리학회지
• /
• 제8권1호
• /
• pp.107-130
• /
• 2005

본 연구의 목적은 인터넷이 발달함에 따라 최근 주목받고 있는 인터넷 영화산업의 공간적 분포와 입지적 특성을 파악하고, 인터넷 영화산업의 가치사슬과 인터넷 영화의 유통구조를 분석하고, 인터넷 영화 사업체들의 연계성과 이들의 공간적 집적화 현상을 파악하려는 것이다. 인터넷 영화산업은 영화 콘텐츠와 관련된 기술의 발달, 인터넷의 광대역화와 초고속통신망의 확충 및 영화 컨텐츠에 대한 수요 증가로 인해 급성장하고 있다. 우리나라 인터넷 영화산업의 74$\%$는 서울에 집중하고 있었으며, 서울에서도 강남구와 서초구 일부지역에 집적하고 있다 인터넷 영화산업의 입지선정에 영향을 준 중요한 요인으로는 동종$\cdot$유사업체의 근접성, 교통의 편리성, 장소의 지명도, 기술관련 업체와의 근접성 순으로 나타났다. 인터넷 영화산업은'콘텐츠 공급 $\rightarrow$ 콘텐츠 유통 $\rightarrow$ 서비스 공급'이라는 가치사슬로 이루어져 있자만, VOD판권 소유자, VOD판권 유통대행사, 서비스 공급자들이 가치사슬 전반에 참여하면서 매우 복잡한 유통구조를 형성하고 있다. 인터넷 영화사업체들은 인터넷 영화를 서비스하기 위해 영화 콘덴츠 제공업체 기술 $\cdot$ 운영지원업체, 주요 고객업체, 그리고 협력 $\cdot$ 제휴업체들과의 긴밀한 네트워킹을 구축하고 있으며, 이들은 국지적으로 집적하여 공식적, 비공식적인 모임을 통해서 시너지 효과를 창출하고 있다.