• 전자공학회논문지
• /
• 제52권2호
• /
• pp.55-69
• /
• 2015

근접 결합 급전 방식을 이용한 마이크로스트립 패치 안테나의 급전 선로에 임피던스 정합기를 집적하여 대역폭을 확장하는 방법에 대하여 연구하였다. 여러 가지 유전상수와 두께를 가지는 기판을 사용한 근접 결합 급전을 이용한 패치 안테나에 임피던스 정합기를 집적한 경우와 임피던스 정합기를 사용하지 않은 경우의 대역폭과 방사특성을 비교하였다. 임피던스 정합기를 사용한 경우가 사용하지 않은 경우에 비하여 방사특성의 저하 없이 대역폭이 크게 증가함을 볼 수 있었다.

• Journal of electromagnetic engineering and science
• /
• 제18권2호
• /
• pp.129-135
• /
• 2018

This paper proposes a design of small controlled reception pattern antenna (CRPA) arrays using circular microstrip loops with frequency-insensitive characteristics. The proposed array consists of seven identical upper and lower circular loops that are electromagnetically coupled, which results in a frequency-insensitive behavior. To demonstrate the feasibility of the proposed feeding mechanism, the proposed array is fabricated, and its antenna characteristics are measured in a full-anechoic chamber. The operating principle of the proposed feeding mechanism is then interpreted using an equivalent circuit model, and the effectiveness of the circular loop shape is demonstrated by calculating near electromagnetic fields in proximity to the radiator. The results confirm that the proposed feeding mechanism is suitable to have frequency-insensitive behavior and induces strong electric and magnetic field strengths for higher radiation gain in extremely small antenna arrays.

• 한국전자파학회논문지
• /
• 제26권8호
• /
• pp.718-729
• /
• 2015

S-대역과 X-대역에서 동작하며, 개구면 공유 구조를 가지는 광대역 패치 안테나를 제작하였다. S-대역 안테나는 $2{\times}2$로 천공된 패치를 가지며, 천공된 자리에 X-대역에서 동작하는 패치 안테나를 $2{\times}2$ 배열하였다. 두 대역에서 모두 20 % 이상의 넓은 대역폭 특성을 가지는 개구면 공유 구조를 가지는 이중 대역 안테나를 제작하고, 방사 특성을 분석하였다.

• ETRI Journal
• /
• 제30권4호
• /
• pp.597-599
• /
• 2008

This letter presents the design of a small and low-profile RFID tag antenna in the UHF band that can be mounted on metallic objects. The designed tag antenna, which uses a ceramic material as a substrate, consists of a radiating patch and a microstrip line with two shorting pins for a proximity-coupled feeding structure. Using this structure, impedance matching can be simply obtained between the antenna and tag chip without a matching network. The fractional impedance bandwidth for $S_{11}$ <3 dB and radiation efficiency are about 1.4% and 56% at 911 MHz, respectively. The read range is approximately from 5 m to 6 m when the tag antenna is mounted on a metallic surface.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.441-444
• /
• 2008

This paper describes the development of a circularly polarized microstrip antenna, as a part of the Circularly Polarized Synthetic Aperture Radar (CP-SAR) sensor which is currently under developed at the Microwave Remote Sensing Laboratory (MRSL) in Chiba University. CP-SAR is a new type of sensor developed for the purpose of remote sensing. With this sensor, lower-noise data/image will be obtained due to the absence of depolarization problems from propagation encounter in linearly polarized synthetic aperture radar. As well the data/images obtained will be investigated as the Axial Ratio Image (ARI), which is a new data that hopefully will reveal unique various backscattering characteristics. The sensor will be mounted on an Unmanned Aerial Vehicle (UAV) which will be aimed for fundamental research and applications. The microstrip antenna works in the frequency of 1.27 GHz (L-Band). The microstrip antenna utilized the proximity-coupled method of feeding. Initially, the optimization process of the single patch antenna design involving modifying the microstrip line feed to yield a high gain (above 5 dBi) and low return loss (below -10 dB). A minimum of 10 MHz bandwidth is targeted at below 3 dB of Axial Ratio for the circularly polarized antenna. A planar array from the single patch is formed next. Consideration for the array design is the beam radiation pattern in the azimuth and elevation plane which is specified based on the electrical and mechanical constraints of the UAV CP-SAR system. This research will contribute in the field of radar for remote sensing technology. The potential application is for landcover, disaster monitoring, snow cover, and oceanography mapping.