• Archives of Reconstructive Microsurgery
• /
• v.16 no.2
• /
• pp.125-132
• /
• 2007

Introduction: Ulna is nearly equal to radius in function and bony architecture and strength in forearm. But in lower extremity, fibula is 1/5 of tibia in anatomic and functional point so we can find fibula transposition is commonly used in defect of tibia. We cannot find other article about segmental forearm bone transposition in man. The purpose of this study was to report our clinical and functional result of undergoing segmented transposition of ipsilateral ulna with its own vascular supply in defect of radius in 6 cases. Material and method: From June 1994 to October 2007, 7 segmented bone transpositional grafts in forearm were performed in Kyung Hee Medical Center. The distribution of age was from 20 years old to 73 years old. There was male in 6 cases and female in 1 case. The causes of operation were giant cell tumor in 1 case and traumatic origin in 6 cases; it was nonunion in 2 cases and fracture with severe comminution in 4 cases. Ipsilaterally segmented ulna keeping its own vascular supply was transported to defect of radius in severe traumatic patients and one patient whose tumor in radius had been excised. Transported ulna was fixed to proximal and distal radius remnants by plate and screw. In one case with giant cell tumor, transported ulna was connected to radius across wrist joint as wrist joint fusion. Joint preserving procedures were performed in 6 cases with crushing injury of radius. Results: We could obtain solid bony union in all cases and good functional results. The disadvantage was relative shortening of forearm, but we could overcome this problem. Conclusion: We think that ipsilateral segmented ulna transposition keeping its own vascular supply to radius can be perfomed with one of procedures in cases with wide defect in radius.

• Clinics in Shoulder and Elbow
• /
• v.23 no.3
• /
• pp.144-151
• /
• 2020

Background: This study was designed to evaluate characters of the rotator cuff tear (RCT) recognized after primary shoulder dislocation in patients older than 40. Methods: From 2008 to 2019, patients who visited two hospitals after dislocation were retrospectively reviewed. Inclusion criteria were patients over 40 who had dislocation, with magnetic resonance imaging (MRI) undergone. Exclusion criteria were patients who lost to follow-up, combined with any proximal humerus fracture, brachial plexus injury, and previous operation or dislocation history in the ipsilateral shoulder. Also patients who had only bankart or bony bakart lesion in MRI were excluded. We evaluated RCTs that were recognized by MRI after the primary shoulder dislocation with regard to tear size, degree, involved tendons, fatty degeneration, the age when the first dislocation occurred, and the duration until the MRI was evaluated after the dislocation. Results: Fifty-five RCTs were included. According to age groups, the tear size was increased in coronal and sagittal direction, the number of involved tendons was increased, and the degree of fatty degeneration was advanced in infraspinatus muscle. Thirty-two cases (58.2%) conducted MRI after 3 weeks from the first shoulder dislocation event. This group showed that the retraction size of the coronal plane was increased significantly and the fatty accumulation of the supraspinatus muscle had progressed significantly. Conclusions: Age is also a strong factor to affect the feature of RCT after the shoulder dislocation in patients over 40. And the delay of the MRI may deteriorate the degree of tear size and fatty degeneration.

• Journal of Korean Foot and Ankle Society
• /
• v.16 no.4
• /
• pp.235-240
• /
• 2012

Purpose: The aim of this study was to evaluate the radiographic and clinical results of short scarf osteotomy that has minimized longitudinal cut for moderate hallux valgus. Materials and Methods: Total 12 patients (12 feet) were reviewed by medical records and radiographs. All patients were female and the mean age at the time of operation was 41.5 years. The mean followup time was 21.2 months. We modified original scarf osteotomy by shortening the longitudinal cut to 15~20 mm in length. Additionally, Akin osteotomy of the first proximal phalanx was done in 7 feet and Weil osteotomy of the second metatarsal was done in 4 feet. First-second intermetatarsal and hallux valgus angles were analyzed radiographically before and after the operation. And the clinical result was assessed by AOFAS (American Orthopaedic Foot and Ankle Society) hallux score. Results: First-second intermetatarsal and hallux valgus angles were reduced from the mean preoperative values of $14.6^{\circ}$ and $32.8^{\circ}$ to $6.5^{\circ}$ and $11.2^{\circ}$, respectively. The mean AOFAS hallux score was increased from 52.4 points preoperatively to 88.2 points at followup. Three complications were found: metatarsal fracture during the operation, painful scar around second metatarsal head after Weil osteotomy and postoperative neuralgia. There was no transfer metatarsalgia or recurrence of hallux valgus during followup. Conclusion: Short scarf osteotomy would be an effective surgical procedure for moderate hallux valgus with the benefits of minimized soft tissue dissection and stable fixation.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.2
• /
• pp.187-197
• /
• 2013

PURPOSE. The purpose of this study was to evaluate various core designs on stress distribution within zirconia crowns. MATERIALS AND METHODS. Three-dimensional finite element models, representing mandibular molars, comprising a prepared tooth, cement layer, zirconia core, and veneer porcelain were designed by computer software. The shoulder (1 mm in width) variations in core were incremental increases of 1 mm, 2 mm and 3 mm in proximal and lingual height, and buccal height respectively. To simulate masticatory force, loads of 280 N were applied from three directions (vertical, at a $45^{\circ}$ angle, and horizontal). To simulate maximum bite force, a load of 700 N was applied vertically to the crowns. Maximum principal stress (MPS) was determined for each model, loading condition, and position. RESULTS. In the maximum bite force simulation test, the MPSs on all crowns observed around the shoulder region and loading points. The compressive stresses were located in the shoulder region of the veneer-zirconia interface and at the occlusal region. In the test simulating masticatory force, the MPS was concentrated around the loading points, and the compressive stresses were located at the 3 mm height lingual shoulder region, when the load was applied horizontally. MPS increased in the shoulder region as the shoulder height increased. CONCLUSION. This study suggested that reinforced shoulder play an essential role in the success of the zirconia restoration, and veneer fracture due to occlusal loading can be prevented by proper core design, such as shoulder.

• Clinics in Shoulder and Elbow
• /
• v.21 no.4
• /
• pp.179-185
• /
• 2018

Background: We analyzed the angle between the glenoid anterior surface and glenoid axis, the range of the glenoid apex and the location of the glenoid apex for assistance during shoulder surgery. Methods: Sixty-two patients underwent a computed tomography of the shoulder with a proximal humerus fracture. In the range of the glenoid apex, the ratios of the distribution of triangles with a Constant anterior and posterior area of the glenoid were measured. The location of glenoid apex was confirmed as the percentage of the position with respect to the upper part of the glenoid with the center of the part, analyzed the angle between the glenoid anterior surface and glenoid axis was measured. Results: The angle between the glenoid anterior surface and glenoid axis was $19.80^{\circ}{\pm}3.88^{\circ}$. The location of the glenoid apex is $60.36%{\pm}9.31%$, with the upper end of the glenoid as the reference. The range of the glenoid apex was $21.16%{\pm}4.98%$. When the height of the glenoid becomes smaller, the range of the glenoid apex tends to become larger (p=0.001) and the range of the glenoid apex becomes wider (p=0.001) as the glenoid width narrows. Conclusions: We believe the anatomical measurements of the glenoid will be helpful for a more accurate insertion in glenoid component. It is thought that more accurate insertion is possible if we can set other anatomical measurements using computed tomography imaging of the glenoid which can develop into the study of other anatomical measurements.

• Clinical and Experimental Pediatrics
• /
• v.62 no.3
• /
• pp.90-94
• /
• 2019

Purpose: Several published policy statements have warned against the risks associated with trampoline use and recommended safety guidelines. However, few studies have focused on trampoline-related injuries in Korea. This study aimed to assess the incidence and characteristics of pediatric trampoline-related injuries presented to Ulsan University Hospital. Methods: We retrospectively reviewed the medical records of children aged <16 years with trampoline-related injuries who visited our Emergency Department between 2008 and 2017. Results: Over the 10-year period, 178 trampoline-related injuries were reported, which represented a significant increase (P=0.016). Most (87.6%) of the injuries occurred during the last 5 study years, and a rapid increase in injuries was observed in children aged <6 years. Lower extremity injuries (62.4%) were the most common, followed by injuries of the upper extremities, head and face, and trunk, including injuries to the neck and spine. Sixty-seven children (37.6%) had fractures, and proximal tibia fractures were the most common. Fractures were significantly more common in younger children (<6 years old) than in older children (P=0.026). Conclusion: In Korea, the mechanism of trampoline injury is similar to that of injuries incurred in indoor trampoline parks but is characterized by smaller spaces and multiple users. Trampoline use and the incidence of trampoline-related injuries in children aged <6 years are increasing rapidly. Prohibiting the use of trampolines for children aged <6 years, restricting simultaneous use by multiple children, and ensuring adult supervision should be strictly emphasized. Public awareness and policy guidelines are needed to reduce the incidence of trampoline-related injuries.

• Journal of The Korean Society of Integrative Medicine
• /
• v.10 no.3
• /
• pp.247-256
• /
• 2022

Purpose : The purpose of this study was to investigate the effects of Kaltenborn-Evjenth (KE) joint mobilization of the distal radioulnar joints (RUJ) and proximal RUJ in distal radius fractures (DRFs) on range of motion (ROM), grip strength (GS), and patient-written wrist evaluation (PRWE) in each group once, thrice, or fivefold. Methods : Forty-two subjects participated in this study. We divided the subjects with DRFs into groups applying KE concepts RUJ mobilization once, thrice, and fivefold. The patients' ROM and GS were measured using a joint goniometer and dynamometer, respectively. Pain and function were also assessed using a PRWE. In the statistical analysis, all data were tested for normality using the Shapiro-Wilk test, and paired t-tests were performed for within-group before-and-after comparisons of each intervention. One-way analysis of variance was used for between-group comparisons of differences. All statistical significance levels were set at α=.05. Results : There were significant differences in the ROM in all three groups before and after the intervention (p<.05), but there were no significant differences between the groups. There were significant differences in the GS in the three groups before and after the intervention (p<.05), but there were no significant differences between the groups. In the pain part of the PRWE, all three groups had significant differences before and after intervention (p<.05), but there was no significant difference between the groups. In the functional part of the PRWE, there were significant differences in the three groups before and after intervention (p<.05), but no significant difference occurred between the groups. Conclusion : Based on the aforementioned results, there were no significant between-group differences in ROM, GS, and PRWE (pain and function) after the application of the K-E joint mobilization to DRFs once, thrice, and fivefold. Nevertheless, there were significant within-group differences in all the above.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.3
• /
• pp.746-763
• /
• 1996

An alternative design to conventional class II cavity preparation for proximal carious lesions is the tunnel preparation. It preserves the marginal ridge intact, thus making it possible to maintain the natural contact relationship with the adjacent tooth and minimize tooth reduction. This in vitro study was purposed to evaluate the effect of the materials' elastic constants and shear-bond strength on the marginal ridge fracture resistance of teeth restored by the tunnel technique, and to find the materials of choice for tunnel restorations. $Resinomer^{(R)}$, $Ketac-silver^{(R)}$, $Miracle-Mix^{(R)}$, and Tytin were used as restorative material. The elastic constants of each restorative material were evaluated by ultrasonic pulse measurement. Young's modulus and bulk modulus of the restorative materials were evaluated in three specimens for each material type. The shear-bond strength of the restorative materials to the dentin surface was measured after thermocycling 400 times between 6 and $60^{\circ}C$, using ten specimens for each material type. For measuring marginal ridge strength, 60 sound extracted molar teeth were distributed into six groups by size. Sound molar teeth were used as a Control group and unfilled prepared teeth were grouped as Unrestored. Another four groups were named Resinomer group, Ketac-Silver group, Miracle Mix group, and Tytin group by type of restorative material. Tunnel cavity preparation was done with ' 1/2, 2, and 4 round burs in sequence. Initial access to proximal surface was made through an occlusal access preparation started at least 2mm from the marginal ridge, and the proximal opening was formed about 2.5mm below the marginal ridge. After restoration and thermocycling, marginal ridge strength was measured using a universal testing machine. The results were as follows: 1. The Young's modulus of $Tytin^{(R)}$ was 63.95 GPa, followed by $Ketac-Silver^{(R)}$ 27.60 GPa, $Miracle-mix^{(R)}$ 18.48 GPa, and $Resinomer^{(R)}$ 10.74 GPa showing significant differences between the groups(P<0.05). The bulk modulus of the materials showed the same order as Young's modulus. The value of $Tytin^{(R)}$ showed 59.57 GPa indicating that it will deform less than other materials under the same stress. It was followed by $Ketac-Silver^{(R)}$ 23.57 GPa, Miracle $Mix^{(R)}$ 12.50 GPa, and $Resinomer^{(R)}$ 11.60 GPa. 2. The Resinomer group had a shear-bond strength of 7.41 MPa which was significantly higher than those of the Ketac-Silver group (1.80 MPa) and the Miracle Mix group (2.84 MPa) (P<0.01). All the specimens of Tytin group detatched from the dentin surface during thermocycling. 3. The mean marginal ridge strength of the Unrestored group(46.14 kgf) was significantly lower than that of the Control group (84.24 kgf) (P<0.01). The marginal ridge strength of teeth restored by the tunnel technique was, in order, Ketac-Silver group 74.06 kgf, Miracle Mix group 73.36 kgf, Resinomer group 63.47 kgf, and Tytin group 58.76 kgf. The Ketac-Silver, Miracle Mix, and Resinomer groups showed no significant difference with the Control group (P>0.05), but the Tytin group showed significantly lower strength compared to the Control group(P<0.05). The results showed that the marginal ridge strength of the teeth restored by the tunnel technique was not significantly lower than that of sound teeth. They also demonstrated that the bonding strength of the restorative material to the tooth surface should be high and the modulus of elasticity should not be lower than that of the tooth in order to restore the marginal ridge strength to its natural condition.

• The Journal of the Korean bone and joint tumor society
• /
• v.16 no.1
• /
• pp.1-7
• /
• 2010

Purpose: With advances in various treatment modalities, limb salvage surgery has been commonly used in osteosarcoma of extremities. An alternative method for skeletal reconstruction is reimplantation of the tumor bearing bone following extracorporeal irradiation (ECI). We report the long-term results of ECI autograft in aspect of the oncological and functional outcomes, and complications. Materials and Methods: We retrospectively reviewed 31 osteosarcoma patients who underwent reconstruction with ECI between July 1995 and January 2006. There were 24 males and 7 females with a mean age of 24 (7-74 years) and a mean follow-up of 117 months (17-177 months). Twenty-five cases were reconstructed with ECI autograft, 6 cases with ECI autograft-prosthesis composite. The pathologic subtypes were conventional in 29 cases, periosteal in 1 case, and parosteal in 1 case. The most common location of tumor was distal femur (15 cases) followed by humerus (3), proximal fibula (3) and proximal tibia (3). Musculoskeletal Tumor Society (MSTS) score was used for functional evaluation. The overall survival rate, local recurrence, complications were analyzed. Results: The overall survival rate was 80.6% and the disease-free survival rate was 64.5%. Five patients died of distant metastasis. One patient required above-knee amputation due to local recurrence. All of them, twenty-three complications occurred, which included nonunion in 7 cases, deep infection in 5 cases, joint instability in 4 cases, metal failure in 2 cases, Limb-length discrepancy (LLD) in 2 cases, periprosthetic fracture in 1 case, epiphyseal collapse in 1, local recurrence in 1 case. The mean MSTS functional score was 62.5%. Conclusion: Extracorporeal irradiated autograft can be achieved relatively good result in aspect of oncological and functional aspect, but is needed to be additional research about occurring many complications. The reconstruction with ECI after intercalary or fragmentary resection is effective reconstruction in aspect of oncological and functional result, complications.

• Journal of the Korean Orthopaedic Association
• /
• v.55 no.6
• /
• pp.520-526
• /
• 2020

Purpose: The need for revision fusion surgery after spinal fusion has increased. A revision rod that connects to the previous rod was newly developed for revision surgery. The purpose of this study was to analyze the clinical and radiological results after spinal fusion revision surgery using revision rods. Materials and Methods: Twenty-one patients who underwent revision fusion surgery after spinal fusion in two university hospitals with minimum 1 year follow-up were reviewed. This study assessed 16 cases of adjacent-segment disease, four cases of thoracolumbar fracture, and one case of ossification of ligament flavum. The Oswestry Disability Index (ODI) and numerical rating scale (NRS) were evaluated as clinical outcomes, and the union rate, lordosis or kyphosis of the revision level, lumbar lordosis, T5-12 kyphosis, and proximal junctional kyphosis angle were evaluated as the radiological outcomes. Results: The average ODI was 54.6±12.5 before surgery and improved to 29.8±16.5 at the final follow-up. The NRS for back pain and leg pain was 5.0±1.7 and 6.4±2.0 before surgery, which changed to 2.9±1.6 and 2.9±2.2 at the final follow-up. Lumbar lordosis was 18.1°±11.9° before surgery and 21.1°±10.3° at the final follow-up. Proximal junctional kyphosis was 10.8°±10.1° before surgery, and 9.2°±10.5° at the final follow-up. These angles were not changed significantly after surgery. Bony union was successful in all cases except for one case who underwent posterolateral fusion. Conclusion: Revision surgery using a newly developed revision rod on the thoracolumbar spine achieved good clinical outcomes with successful bony union. No problems with the newly developed revision rod were encountered.