• Journal of the Korean Ceramic Society
• /
• v.51 no.4
• /
• pp.248-259
• /
• 2014

Acceptor-doped cerium pyrophosphates have shown significant proton conductivity of > $10^{-2}Scm^{-1}$ in the range of $100-300^{\circ}C$ and are considered promising candidates for use as electrolytes in proton-conducting, ceramic electrolyte fuel cells (PCFCs). But, cerium pyrophosphates themselves do not have structural protons, and protons incorporate into their material bulk only as impurities on exposure to a hydrogen-containing atmosphere. However, proton incorporation and proton conduction in these materials are expected to be affected by factors such as the nature (ionic size and charge) and concentration of the aliovalent dopant, processing history (synthesis route and microstructure), and the presence of residual phosphorous phosphate ($P_mO_n$) phases. An exact understanding of these aspects has not yet been achieved, leading to large differences in the magnitude of proton conductivity of cerium pyrophosphates reported in various studies. Herein, we systematically address some of these aspects, and present an overview of factors affecting proton conductivity inacceptor-doped $CeP_2O_7$.

• Journal of the Korean Ceramic Society
• /
• v.45 no.11
• /
• pp.694-700
• /
• 2008

Proton conducting oxides based on the $BaCe_{0.9}M_{0.1}O_{3-{\delta}}$ (M = La, AL) were tested for the alternative electrolyte materials of fuel cell. The power density for single cell of Air |Pt| $BaCe_{0.9}M_{0.1}O_{3-{\delta}}$ |Pt| $H_2(3%H_2O)$ system was maximum $0.04W/cm^2$ at $1000^{\circ}C$. In this system, proton transport number was proved to depend on the lattice parameters and the distortion of $CeO_6$ octahedral as a function of the ionic radii of acceptor ions. This proton conducting oxide system requires developing the new electrode materials for application.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.75.2-75.2
• /
• 2010

Polymer electrolyte fuel cells (PEFCs) have received a lot of attention as a power source for both stationary and mobile applications due to their attractive feature. In general, the performance of PEFCs is highly affected by the property of the electrodes. A PEFC electrode essentially consists of a gas diffusion layer and a catalyst layer. The gas difusion layer is highly porous and hydrophobicized with PTFE polymer. The catalyst layer usually contains electrocatalyst, proton conducting polymer, even PTFE as additive. Particularly, the proton conducting ionomer helps to increase the catalytic activity at three-phase boundary and catalyst utilization. Futhermore, it helps to retain moisture, resulting in preventing the electrodes from membrane dehydration. The most widely used proton conducting ionomer is perfluorinated sulfonic acid polymer, namely, Nafion from DuPont due to its high proton conductivity and good mechanical property. However, there are great demands for alternative ionomers based on non-fluorinated materials in terms of high temperature availability, environmental adaptability and production cost. In this study, the electrodes with the various content of the sulfonated poly(ether sulfone) ionomer in the catalyst layer were prepared. In addition, we evaluated electrochemical properties of the prepared electrodes containing the various amount of the ionomers by using the cyclic voltammetry and impedance spectroscopy to find an optimal ionomer composition in the catalyst layer.

• Journal of the Korean Ceramic Society
• /
• v.42 no.1
• /
• pp.50-55
• /
• 2005

New fast proton-conducting organic-inorganic nanocomposite membranes were successfully fabricated using polymer matrix obtained through proper oxidation of thiol ligands in (3-Mercaptopropyl) trimethoxysilane (MPTS) and hydrolysis/condensation reaction of (3-glycidoxypropyl) trimethoxysilane (GPTS). The obtained nanocomposite membranes showed relatively hirh proton-conductivity over $10^{-2}S/cm$ at $ 25^{circ}C$. The proton conductivities of the fabricated composite membranes increased up to $3.6{\times}10^{-1}$ S/cm cm by increasing temperature and relative humidity to $70^{circ}C$ and 100 $100RH\%$. The high proton conductivity of the composites Is due to the proton conducting path through the GPTS-derived 'pseudo-polyethylene oxide 'network in which sulfonic acid ligands work as a proton donor.

• Journal of the Korean Ceramic Society
• /
• v.56 no.1
• /
• pp.91-97
• /
• 2019

The effect of different Ni-containing additives on the sintering behavior and electric conductivity of the proton conducting electrolyte $BaCe_{0.35}Zr_{0.5}Y_{0.15}O_{3-{\delta}}$ (BCZY5) was investigated. Ni-doped, NiO-added, and $BaY_2NiO_5$(BYN)-added (all 4 mol%) BCZY5 samples were prepared by the solid state synthesis method and sintered at $1400^{\circ}C$ for 6 h. Among the three samples, the onset of densification was observed at the lowest temperature for NiO-added BCZY5, which is attributed to the formation of an intermediate phase at a low melting temperature. The BYN-added sample, where no consumption of the constitutional elements of the electrolyte was expected during sintering, exhibited the highest electrical conductivity whereas the doped sample had the lowest conductivity. The electrical conductivities at $500^{\circ}C$ under humid argon atmosphere were measured to be 2.0, 4.8, and $6.2mS{\cdot}cm^{-1}$ for Ni-doped and NiO- and BYN-added samples, respectively.

• Polymer(Korea)
• /
• v.26 no.2
• /
• pp.179-184
• /
• 2002

Polymer electrolyte films consisting of poly (vinylidenefluoride-hexafluoro-propylene) (PVdF-HFP) $H_3PO_4$and a mixture of ethylene carbonate(EC), $\gamma$-butyrolactone(BL) and dimethylcarbonate (DMC) were examined in order to obtain the best compromise between high protonic conductivity, homogeniety and dimensional stability. Measurements of differential scanning calorimetry and ionic conductivity have been carried out for various compositions. The highest proton conductivity of 7.3 $\times$$10^{-3}Sm^{-1}$ at $30^{\circ}C$ were obtained for a film of 30(PVdF-HFP) + 50EC/DMC + 20H$_3$PO$_4$. From the thermal study, it has been found that the PVdF-HFP gels are stable up to $80^{\circ}C$, and the $H_3PO_4$ enhances the miscibility of the polymer and the solvent by interacting sensitively with polymer segments.

• Elastomers and Composites
• /
• v.47 no.4
• /
• pp.292-296
• /
• 2012

An electric double-layer capacitor (ELDC) of activated carbon electrode is prepared using a proton-conducting hydrogel polymer electrolyte, which is composed of poly(vinyl alcohol), silicotungstic acid, $H_3PO_4$, and deionized water. A solid film by evaporating the hydrogel polymer electrolyte is also prepared for comparison. The hydrogel polymer electrolyte also acts as a separator with the thickness of about $80{\mu}m$ and the room-temperature ionic conductivity of $10^{-2}S\;cm^{-1}$. The EDLC containing the symmetric electrodes of activated carbon shows the specific capacitance of $58F\;g^{-1}$ at $100mV\;s^{-1}$ with a good cycle life, implying that the hydrogel polymer electrolyte is very promising for use in EDLCs.

• Journal of the Korean Ceramic Society
• /
• v.42 no.2 s.273
• /
• pp.77-80
• /
• 2005

A series of proton conductive composite membranes based on poly(vinyl alcohol) and phosphosilicate gels powders were successfully prepared. The proton conductivity of these composite was attributed to the phosphosilicate gel, which derived from tetraethoxysilane and phosphoric acid by sol-gel process at a molar ratio of P/Si = 1.5. The proton conductivity increased with increasing both the content of phosphosilicate gel and relative humidity. Temperature dependence of conductivity showed a Vogel-Tamman-Fulcher type behavior, indicating that proton was transferred through a liquidlike phase formed in micropores of phosphosilicate gel. The high conductivity of 0.065 S/cm with a membrane containing 60 wt$\%$ of the gel was obtained at $60^{\circ}C$ at $90\%$ relative humidity.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2003.07a
• /
• pp.37-40
• /
• 2003

Mesoporous zeolite - heteropolyacid-polymer hybrid membrane was prepared by sol-gel processes to make a proton conducting membrane. The crystallinity of mesoporous zeolite in composite membrane was increased with contents of heteropolyacid. Proton conductivity obtained from impedance measurements increases with contents of heteropolyacid, about 10$^{-3}$ S/cm in ca. 1.5 Wt% heteropolyacid.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2008.05a
• /
• pp.94-97
• /
• 2008