• 한국세라믹학회지
• /
• 제51권4호
• /
• pp.248-259
• /
• 2014

Acceptor-doped cerium pyrophosphates have shown significant proton conductivity of > $10^{-2}Scm^{-1}$ in the range of $100-300^{\circ}C$ and are considered promising candidates for use as electrolytes in proton-conducting, ceramic electrolyte fuel cells (PCFCs). But, cerium pyrophosphates themselves do not have structural protons, and protons incorporate into their material bulk only as impurities on exposure to a hydrogen-containing atmosphere. However, proton incorporation and proton conduction in these materials are expected to be affected by factors such as the nature (ionic size and charge) and concentration of the aliovalent dopant, processing history (synthesis route and microstructure), and the presence of residual phosphorous phosphate ($P_mO_n$) phases. An exact understanding of these aspects has not yet been achieved, leading to large differences in the magnitude of proton conductivity of cerium pyrophosphates reported in various studies. Herein, we systematically address some of these aspects, and present an overview of factors affecting proton conductivity inacceptor-doped $CeP_2O_7$.

• 세라미스트
• /
• 제21권4호
• /
• pp.366-377
• /
• 2018

Solid oxide fuel cells (SOFCs) are promising eco-friendly energy conversion system due to their high efficiency, low pollutant emission and fuel flexibility. High operating temperatures, however, leads to the crucial drawbacks such as incompatibility between the components and high thermal stress. Proton-conducting ceramic fuel cells (PCFCs) with proton-conducting oxide (PCO) materials are new types of fuel cells that can solve the problems of conventional SOFCs. Many studies have been proceeded to improve the performance of electrolytes and electrodes, and triple conductive oxides (TCOs) have attracted significant attention as high performance PCFC electrodes.

• 한국세라믹학회지
• /
• 제55권4호
• /
• pp.358-363
• /
• 2018

To improve the polarization property of cathodes, which is the main factor limiting the performance of protonic ceramic fuel cells (PCFCs), $K_2NiF_4-type$ $Pr_2NiO_{4+{\delta}}$, which is expected to exhibit a triple conducting property (proton, oxygen ion, and hole conductions) was applied to PCFCs and its properties were investigated. Low-temperature microwave heat-treatment was used to achieve both sufficient interface adhesion between the electrolyte and the cathode layers and suppression of the secondary phase formation due to migration of elements such as barium and cerium. Through this fabrication method, a high performance of $0.82W{\cdot}cm^{-2}$ and low ohmic resistance of $0.06{\Omega}{\cdot}cm^2$ were obtained in an $Ni-BaCe_{0.55}Zr_{0.3}Y_{0.15}O_{3-{\delta}}$ | $BaCe_{0.55}Zr_{0.3}Y_{0.15}O_{3-{\delta}}$ | $Pr_2NiO_{4+{\delta}}$ single cell at $650^{\circ}C$. This result verifies that the $K_2NiF_{4+{\delta}}-type$ cathode shows good chemical compatibility which, in turn, will make it a potent candidate as a PCFC cathode.

• 한국세라믹학회지
• /
• 제51권4호
• /
• pp.283-288
• /
• 2014

PdO-doped $BaZr_{0.85}Y_{0.15}O_{3-\delta}$ (BZPY) proton conductors have been proposed as applicable for intermediate temperature electrolytes for protonic ceramic fuel cells (PCFCs) because the PdO doping is effective for improving the proton conductivity of $BaZr_{0.85}Y_{0.15}O_{3-\delta}$ (BZY) with high affinity for hydrogen. In order to further improve the conductivity of BZPY, two-phase composite electrolytes consisting of a BZPY and molten carbonate were designed. Dense BZPY-based composite electrolytes were fabricated after sintering at $670^{\circ}C$ for 4 h, since molten carbonates fill the grain boundary of the porous BZPY matrix. Furthermore, BZPY/$(Li-0.5Na)_2CO_3$ composites show a significantly enhanced protonic conductivity at intermediate temperatures. This may be because easy proton transport is possible through the interface of the carbonate and oxide phase.

• 한국수소및신에너지학회논문집
• /
• 제35권1호
• /
• pp.48-55
• /
• 2024

The electrochemically active site of mixed ionic and electronic conductor (MIEC) as a cathode material is restricted to the triple phase boundary in protonic ceramic fuel cells (PCFCs) due to the insufficient of proton-conducting properties of MIEC. This study primarily focused on expanding the electrochemically active site by La_0.6Sr_0.4Co_0.2Fe_0.8O_3-δ(LSCF6428)-BaZr_0.4Ce_0.4Y_0.1Yb_0.1O_3-δ (BZCYYb4411) composite cathode. The electrochemical properties of the composite cathode were evaluated using anode-supported PCFC single cells. In comparison to the LSCF6428 cathode, the peak power density of the LSCF6428-BZCYYb4411 composite cathode is much enhanced by the reduction in both ohmic and non-ohmic resistance, possibly due to the increased electrochemically active site.

• 한국세라믹학회지
• /
• 제40권2호
• /
• pp.159-166
• /
• 2003

퍼플루오르설포닐 플로라이드 나피온 레진과 mordenite를 이용하여 $100^{\circ}C$ 이상의 고온에서 작동하는 고분자 전해질형 연료건지용 전해질 막을 제조하고, 물리적 특성, proton전도도 및 단위 전지의 성능을 측정하였다. 나피온/mordenite복합체 막은 나피온 레진을 용융한 후, mordenite를 무게별로 첨가하여 제조하였다. 고온 영역에서 proton 전도도를 측정한 결과, mordenite 함량이 증가할수록 층상 구조를 갖는 mordenite내에 존재하는 층간수의 느린 탈수 속도 때문에 proton 전도도는 증가하였다. 또한, 단위 전지 성능 측정 결과로부터, $130^{\circ}C$의 작동 온도에서 l0wt% mordenite를 함유하고 있는 복합체 막이 전체 영역에 걸쳐 가장 높은 성능을 보임을 알 수 있었다. 이러한 결과는 같은 조건에서. l0wt% mordenite가 함유된 복합체 막 내부에 존재하고 있는 수분이 다른 조성의 막보다 더 많이 존재하게 되어, 복합체 막의 이온 전도도를 유지하기 때문이다. 따라서, 나피온/mordenite복합체 막은 $100^{\circ}C$이상에서 작동하는 고분자 전해질형 연료전지용 전해질 막으로서 적합하다고 생각된다.

• 한국세라믹학회지
• /
• 제53권5호
• /
• pp.506-510
• /
• 2016

The eutectic melt of BaO-CuO flux is known to be a potential sintering aid for $Ba(Zr,Y)O_3$ (BZY) electrolyte for proton-conducting ceramic fuel cells (PCFCs). A density of BZY higher than 97% of theoretical density can be achieved via sintering at $1300^{\circ}C$ for 2 h using a flux composed of 28 mol% BaO and 72 mol% CuO. In the present study, chemical and structural evolution of BaO-CuO flux throughout the sintering process was investigated. An intermediate holding step at $1100^{\circ}C$ leads to formation of various impurity compounds such as $BaCuO_{1.977}$, $Ba_{0.92}Cu_{1.06}O_{2.28}$ and $Cu_{16}O_{14.15}$, which exhibit significantly larger unit cell volumes than the matrix. The presence of such secondary compounds with large lattice mismatch can potentially lead to mechanical failure. On the other hand, direct heating to the final sintering temperature produced CuO and $Cu_2O$ as secondary phases, whose unit cell volumes are close to that of the matrix. Therefore, the final composition of the flux is strongly affected by the thermal history, and a proper sintering schedule should be used to obtain the desired properties of the final product.

• 공업화학
• /
• 제34권3호
• /
• pp.226-240
• /
• 2023

This paper provides an overview of the trends and future directions in the development of anode materials for solid oxide fuel cells (SOFCs) using hydrocarbons as fuel, with the aim of enabling a decentralized energy supply. Hydrocarbons (such as natural gas and biogas) offer promising alternatives to traditional energy sources, as their use in SOFCs can help meet the growing demands for energy. We cover several types of materials, including perovskite structures, high-entropy alloys, proton-conducting ceramic materials, anode on-cell catalyst reforming layers, and anode functional layers. In addition, we review the performance and long-term stability of cells based on these anode materials and assess their potential for commercial manufacturing processes. Finally, we present a model for enhancing the applicability of fuel cell-based power generation systems to assist in the realization of the H₂ economy as the best practice for enabling distributed energy. Overall, this study highlights the potential of SOFCs to make significant progress toward a sustainable and efficient energy future.

• 한국세라믹학회지
• /
• 제42권1호
• /
• pp.50-55
• /
• 2005

(3-Mercaptopropyl) trimethoxysilane(MPTS)의 thoil기(-SH)의 적절한 산화 및 (3-glycidoxypropyl) trimethooxysilane(GHS)와의 수화/중축합 반응을 통하여 얻어진 고분자 기질을 사용하여 새로운 고 프로톤 전도성 유기-무기 나노복합막을 성공적으로 합성하였다. 합성된 나노복합막으로부터 얻어진 프로톤 전도도는 $25^{circ}C$에서 $10^{-2} S/cm$ 이상의 높은 값을 나타내었으며, 온도와 상대습도를 $70^{circ}C$와 $100RH\%$로 증가시킴에 따라 전도도는 $3.6{\times}10^{-1}$ S/cm까지 증가하였다. 복합체의 높은 프로톤 전도도는 MPTS 말단의 thiol의 산화에 의해 얻어지는 아황산기$(-SO_{3}^{-})$가 프로톤 donor로서 작용하고, GHS로부터 유도된 'pseudo polyethylene oxide' 네트워크가 프로톤의 전도 path로 작용하고 있음을 나타낸다.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 춘계총회 및 연구발표회 초록집
• /
• pp.21.2-21
• /
• 2003