• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.3079-3089
• /
• 2015

In this paper, a smart constrained application protocol (CoAP)-based gateway with a border router is proposed for home safety services to remotely monitor the trespass, fire, and indoor air quality. The smart CoAP gateway controls a home safety sensor node with a pyroelectric infrared motion sensor, a fire sensor, a humidity and temperature sensor, and a non-dispersive infrared CO2 sensor and gathers sensing data from them. In addition, it can convert physical sensing data into understandable information and perform packet conversion as a border router for seamless connection between a low-power wireless personal area network (6LoWPAN) and the Internet (IPv6). Implementation and laboratory test results verify the feasibility of the smart CoAP gateway which especially can provide about 97.20% data throughput.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.1
• /
• pp.65-75
• /
• 2003

The internet telephony service is one of the successful internet application services. VoIP is the key technology for the service to come true. VoIP uses H.323 or SIP as the standard protocol for the distributed multimedia services over the internet environment, in which QoS is not guaranteed. VoIP carries the packetized voice by using the RTP/UDP/IP protocol stack. The UDP-based internet services cause the data transmission problem to the users behind the internet firewall. So does the internet telephony service. The users are not able to listen the voices of the counter-parts on the public internet or PSTN. It makes the problem more difficult that the internet telephony service addressed in this paper uses only one UDP port number to send the voice data of all sessions from gateway to terminal node. In this paper, two schemes including the usage of dummy UDP datagrams, and the protocol conversion are suggested. The implementation of one of the schemes, the protocol conversion, and the performance evaluation are described in detail.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1673-1678
• /
• 2019

There are various networks and communication methods are used in industrial communication. Enterprises need to convert communications between industrial devices and networks for production line expansion, factory upgrades, network segmentation, and SI. This requires designers manufactured by many manufacturers to provide communication equipment for data or protocol conversion in order to connect and transmit various other mechanical devices to the network. This paper designed industrial communication gateway that can support the transformation of industrial communication protocol using multi-layered communication module. Industrial communication gateways have a structure that connects individual communication modules using RS485 communication to multiple layers. Each communication module consisted of analog and digital data card, LAN, and CAN-enabled card. The main board processor used Atmega micro-processor, and the RS485 slot was placed to have a multi-layer communication module structure. These additive layer type communication modules support analog and digital I/O functions and LAN and CAN for wide use in industrial communication control and monitoring.

• Journal of Internet Computing and Services
• /
• v.6 no.3
• /
• pp.45-54
• /
• 2005

Recently, researches on various base technologies for wireless Internet services have been conducted. In the WAP (Wireless Application Protocol) Forum, a WAP gateway which does mutual conversion between existent wired Internet protocols and WAP protocols was proposed. In this paper, CSA(Client Side Agent) and SSA(Server Side Agent) for WAP gateway environments are designed and implemented, as a way of improving communication efficiency in such restrictive environments as wireless communications. Located on mobile WAP devices(CSA) and a WAP Gateway(SSA), the agents perform communication efficiency improvement activities such as a packet header reduction mechanism and a data reduction mechanism using data differencing analysis in order to reduce the size of data transmission in wireless communication environments. The Internet phone emulator of Phone.com is used in order to make sure that the implemented agents work correctly, Experimental results show that the implemented agents reduce the size of data transmission significantly.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.197-199
• /
• 2018

Recently, many industrial instruments face the problem of protocol compatibility with the external monitoring and control system. This paper is prepared in the main control board to support the industrial communication protocol conversion, control, and monitoring. The industrial communication gateway module is also designed to ensure that the protocol conversion of CAN bus and Ethernet. The main board processor is used the Atmega2560, and placed 4ea RS485 serial slots for sub-board. One of them is used for communication CAN bus and Ethernet. It provides analog and digital I / O through each of the slots is used for control and monitoring.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.3
• /
• pp.332-338
• /
• 2010

In this paper, Zigbee/PLC gateway system is designed for Ubiquitous health care. A protocol conversion algorithm for smooth information exchange between Zigbee and PLC communication has been implemented on the gatway. If a moving object is detected by wireless sensor, the data is transmitted to gateway. Zigbee/PLC gateway analyzes received data and transmits to Power Line Communication for real-time monitoring. Implemented system is can support elder who lives alone activity analysis, crime prevention system, Home network service.

• 전자공학회논문지 IE
• /
• v.49 no.2
• /
• pp.58-64
• /
• 2012

In this paper, we proposed a distributed gateway for ubiquitous healthcare system. We also designed and implemented protocol conversion and processing algorithms to exchange a seamless information, the bio signals between the databases and the receiving devices from ZigBee to gateway and from the gateway to database and network. The distributed gateway system consists of the bio signal acquisition, ZigBee modules, distributed databases, and gateways. The bio signals detected by the ZigBee module are sent to the gateway. The distributed gateway analyzes the data being transferred, sends those to the receiving devices, and lets the authorized personnel access. The proposed system can be utilized in various fields including activity analysis for the elderly, security systems, home network service, and so on.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.133-136
• /
• 2019

Recently, many industrial devices are facing protocol compatibility problems with external monitoring and control systems. This paper designed an industrial communication gateway that can support the transformation of industrial communication protocol using multi-layered communication module. Industrial communication gateways have a structure that connects individual communication modules using rs485 serial communication to multiple layers. Each communication module consisted of analog data card, a digital data card LAN, and a CAN-enabled card. The main board processor used Atmega micro-processor, and the rs485 serial slot was placed to have a multi-layer communication module structure. These additive layer type communication modules support analog and digital I/O functions and LAN and CAN for wide use in industrial communication control and monitoring.

• Journal of Internet Computing and Services
• /
• v.7 no.3
• /
• pp.61-69
• /
• 2006

Data synchronization between data stored in mobile communication terminals and a central server is one of essential tasks for efficient mobile communication environments. Since, however, manufacturers of mobile terminals have their proprietary data synchronization mechanisms, data interoperability can hardly be achieved. Therefore, SyncML data synchronization mechanism in mobile communication environments was proposed as an open standard by OMA(Open Mobile Alliance). In this paper, a SyncML-based data synchronization gateway is designed and implemented which can process ActiveSync data also. In other words, by constructing a combined data synchronization gateway which can transform ActiveSync data into SyncML data, data interoperability between mobile terminals which use two different data synchronization mechanisms can be achieved, In addition, mobile communication experiments between ActiveSync-based terminals and a SyncML-based central server show that the data synchronization gateway constructed in this paper, works correctly.

• Journal of IKEEE
• /
• v.17 no.4
• /
• pp.550-558
• /
• 2013

In this paper, we propose an efficient hybrid lighting management system implementation on multiple protocol. The proposed hybrid lighting management system was implemented by configured as the data display part for management and control of lighting device and the data conversion-processing part the communication part of gateway. The data were designed the DB to enable to storage in real-time, and implemented able to manage by real time wireless remote control and schedule setting. The proposed an efficient hybrid lighting management system, it was possible the real-time monitoring and remote lighting control by peristalsis with smart devices and portable PC etc., and it could be obtained reduction effect of energy and electricity, communication cost.