• Applied Science and Convergence Technology
• /
• 제24권1호
• /
• pp.1-8
• /
• 2015

Protein immobilization on a gold surface plays an important role in the usefulness of biosensors that utilize gold-coated surfaces such as surface plasmon resonance (SPR), quartz crystal microbalance (QCM), etc. For developing high performance biosensors, it is necessarily required that immobilized proteins must remain biologically active. Loss of protein activity and maintenance of its stability on transducer surfaces is directly associated with the choice of immobilization methods, affecting protein-protein interactions. During the past decade, a variety of strategies have been extensively developed for the effective immobilization of proteins in terms of the orientation, density, and stability of immobilized proteins on analytical devices operating on different principles. In this review, recent advances and novel strategies in protein immobilization technologies developed for biosensors are briefly discussed, thereby providing an useful information for the selection of appropriate immobilization approach.

• 펄프종이기술
• /
• 제32권5호
• /
• pp.60-66
• /
• 2000

Coating immobilization is the process by which the wet coating applied to paper or paperboard reaches the final form. A coating immobilization point is defined as the solids content reached during drying where no further redistribution of coating materials occurs. Good control of coating immobilization is important in producing coated paper and paperboard with consistent high quality. This paper discusses the technical concepts of how coatings immobilize, and describes the importance of good immobilization control on coating holdout and coating structure. The use of soy protein polymers to modify the coating immobilization point is discussed. Soy proteins, because of their interaction with coating pigments, make a significant contribution to the immobilization characteristics of coastings. This technology gives the formulator options for changing the immobilization point to improve the performance of the coating. The importance of immobilization on casting uniformity, microporosity and sheet qualities is discussed, including binder migration, mottle, gluing, and print quality.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권12호
• /
• pp.5115-5118
• /
• 2015

Background: The $p16^{INK4a}$ is a protein that expressed in Liquid-based cervical cytology specimens and has been proved link to cervical cancer. The $p16^{INK4a}$ could be detection by piezoelectric immunosensor and the immobilization of the $p16^{INK4a}$ antibody influence the sensitivity of the piezoelectric immunosensor. Materials and Methods: $5{\mu}L$ mouse polyclonal antibody against $p16^{INK4a}$ was bound onto the surface of immonosensor through two methods. (directly immobilized method; protein A method). Absorb of the $p16^{INK4a}$ antibody on the surface of immonosensor caused a shift in the resonant frequency of the immunosensor and The frequency changes recorded showed a better reproducibility. The activity of the immobilization antibody with the directly method and protein A method was tested with $p16^{INK4a}$ antigen. Results: The resonant frequency for different antibody immobilization methods were different, and the sensitivity for $p16^{INK4a}$ detection also different. Conclusions: The protein A method was found to be much more better than the directly method for the immobilization of the p16INK4A antibody on the gold electrode of the quartz crystal for cervical lesion detection. The Protein A method created more reproducible and stable immobilization antibody layers with p16INK4A antigen.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2001년도 추계학술발표대회
• /
• pp.886-889
• /
• 2001

C-terminus specific immobilization often results in a increased structural stability resistant to various denaturation factors. In order to elucidate the immobilization effect on the c-terminus in molecular level, we made over 200 protein data set from Protein Data Bank(PDB), analyzed c-terminus structure of each protein, and investigated the structural relationship with the stabilizing factors such as hydrogen bond, ion pairs, cation pi, disulfide bond, solvation free energy, surface area, flexibility and so on.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제8권4호
• /
• pp.263-267
• /
• 2003

Magnetic nanoparticles prepared from an alkaline solution of divalent and trivalent iron ions could covalently bind protein via the activation of Nethyl-N-(3-dimethylaminopropyl) carbodiimide (EDC). Trypsin and avidin were taken as the model proteins for the formation of protein-nanoparticle conjugates. The immobilized yield of protein increased with molar ratio of EDC/nanoparticie. Higher concentrations of added protein could yield higher immobilized protein densities on the particles. In contrast to EDC, the yields of protein immobilization via the a ctivation of cyanamide were relatively lower. Nanoparticles bound with avidin could attach a single-stranded DNA through the avidin-biotin interaction and hybridize with a DNA probe. The DNA hybridization was confirmed by fluorescence microscopy observations. Immobilized DNA on nanoparticles by this technique may have widespread applicability to the detection of specific nucleic acid sequence and targeting of DNA to particular cells.

• Journal of Microbiology and Biotechnology
• /
• 제26권5호
• /
• pp.829-836
• /
• 2016

Penicillin G acylase (PGA) was immobilized on magnetic Fe₃O₄@chitosan nanoparticles through the Schiff base reaction. The immobilization conditions were optimized as follows: enzyme/support 8.8 mg/g, pH 6.0, time 40 min, and temperature 25 ℃. Under these conditions, a high immobilization efficiency of 75% and a protein loading of 6.2 mg/g-support were obtained. Broader working pH and higher thermostability were achieved by the immobilization. In addition, the immobilized PGA retained 75% initial activity after ten cycles. Kinetic parameters V_max and K_m of the free and immobilized PGAs were determined as 0.113 mmol/min/mg-protein and 0.059 mmol/min/mg-protein, and 0.68 mM and 1.19 mM, respectively. Synthesis of amoxicillin with the immobilized PGA was carried out in 40% ethylene glycol at 25 ℃ and a conversion of 72% was obtained. These results showed that the immobilization of PGA onto magnetic chitosan nanoparticles is an efficient and simple way for preparation of stable PGA.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제9권4호
• /
• pp.241-244
• /
• 2004

Protein A molecular thin film was fabricated as a platform of antibody-based biosensor. For the immobilization of the protein A thin film, a viologen multilayer was built up using the Langmuir-Blodgett (LB) technique, and then, protein A was adsorbed on the viologen LB film by an electrostatic interaction force, which was formed as a hetero-film structure. For the deposition of viologen, surface pressure area ($\pi$-A) isotherm was investigated. The fabricated protein A-viologen hetero LB film was investigated using atomic force microscopy (AFM). Using the developed molecular film, antibody immobilization and fluorescence measurement was carried out.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2001년도 추계학술발표대회
• /
• pp.859-862
• /
• 2001

For the development of preferable immunosensor and protein chip, the viologen Langmuir-Blodgett (LB) multilayer was fabricated on the surface, and then protein A was adsorbed on the proposed viologen LB film by electrostatic attractive force. The Immunoglobulin G (IgG) labeled with fluorescence marker was self-assembled on the fabricated protein A film. The topographies of the deposited films were investigated by using atomic force microscope (AFM). The immobilization of IgG was verified by fluorescence spectrum. Such structures can be used as sublayers for various kinds of IgG immobilization toward immunosensors and protein chip.

• Journal of Microbiology and Biotechnology
• /
• 제28권4호
• /
• pp.638-644
• /
• 2018

In this study, the immobilization of xylanase using a protein-inorganic hybrid nanoflower system was assessed to improve the enzyme properties. The synthesis of hybrid xylanase nanoflowers was very effective at $4^{\circ}C$ for 72 h, using 0.25 mg/ml protein, and efficient immobilization of xylanase was observed, with a maximum encapsulation yield and relative activity of 78.5% and 148%, respectively. Immobilized xylanase showed high residual activity at broad pH and temperature ranges. Using birchwood xylan as a substrate, the $V_{max}$ and $K_m$ values of xylanase nanoflowers were 1.60 mg/ml and $455{\mu}mol/min/mg$ protein, compared with 1.42 mg/ml and $300{\mu}mol/min/mg$ protein, respectively, for the free enzyme. After 5 and 10 cycles of reuse, the xylanase nanoflowers retained 87.5% and 75.8% residual activity, respectively. These results demonstrate that xylanase immobilization using a proteininorganic hybrid nanoflower system is an effective approach for its potential biotechnological applications.

• 생명과학회지
• /
• 제22권8호
• /
• pp.1132-1136
• /
• 2012

많은 종류의 세포스트레스는 unfolded protein response (UPR)관련인자의 유전자발현을 조절한다. 본 연구결과 부동스트레스(immobilization stress)는 세포의 소포체스트레스(ER stress)와 관련된 유전자발현의 변화를 유도한다; Heart, spleen, thymus, kidney, testis에서는 유전자발현 변화가 없었지만 adrenal gland, liver, lung에서는 유의할만한 상승변화가 있었다. 그러나 muscle에서는 다른 것들과 대조적으로 발현이 감소되었다. 이 결과는 부동스트레스도 다른 종류의 세포스트레스와 같이 세포수준에서 UPR을 조절할 수 있다는 최초의 보고이다.