• 대한기계학회논문집A
• /
• 제40권3호
• /
• pp.297-304
• /
• 2016

세라믹(AD-90 alumina, $B_4C$) 타일이 삽입된 금속 블록(4340-steel)에 텅스텐 합금(tungsten alloy)의 긴 운동에너지탄을 수직 고속 충돌시키는 수치해석을 수행하였다. 본 연구를 수행하기에 앞서 두 가지의 반무한판 충돌 모델의 침투 깊이에 대해서 검증을 하였다. 세라믹 재료는 JH-2 (Johnson-Holmquist) 모델을 적용하였고 계산된 침투 깊이를 실험값과 비교하여 만족할만한 결과를 얻었다. 앞서 언급한 판에 대해서 세라믹 타일의 세 가지 두께별로 금속판에 삽입된 위치를 다르게 하여 충돌 시뮬레이션을 수행하였다. 긴 관통자의 잔류속도, 잔류질량 그리고 잔류운동에너지를 얻어 세라믹 타일의 위치가 구조물의 방호 성능에 어떠한 영향을 미치는지 알아보았다. 그리고 단순 금속 블록 대비 세라믹 타일을 사용하는 경우의 질량 효율이 어떻게 되는지 확인해보았다. 마지막으로 이들을 토대로 질량효율 관점에서 최적 방호구조에 대한 평가를 수행하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.370-371
• /
• 2011

This paper proposed an under-voltage relay algorithm module for a network based protective relay simulator. The simulation system is based on the client-server paradigm. The relaying simulator which consists of server-side relay models and user interface provides network-based simulation environment for a variety of protective relaying algorithms. The performance of the relay algorithm was verified by comparing the results of under-voltage relay algorithm in the simulator with the results of the C language implementation.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권7호
• /
• pp.382-388
• /
• 2004

The most widely used primary protection for the internal fault detection of power transformers is current percentage differential relaying(PDR). However, the harmonic components could be decreased by magnetizing inrush when there have been changes to the material of iron core or its design methodology. The higher the capacitance of high voltage status and underground distribution, the more differential current includes the second harmonic component during occurrence of an internal fault. Therefore, the conventional harmonic restraint methods need modification. This paper proposes an advanced protective relaying algorithm by fluxt-differential current slope characteristic and trend of voltage and differential current. To evaluate the performance of proposed algorithm, we have made comparative studies of PDR fuzzy relaying, and DWT relaying. The paper is constructed power system model including power transformer, utilizing the WatATP99, and data collection is made through simulation of various internal faults and inrush. As the results of test. the new proposed algorithm was proven to be faster and more reliable.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1394-1396
• /
• 1999

It is important the protective relay should have high selectivity and sensitivity performance and it is achieved by correct setting of the relay parametes. The verification of accurate setting for the protective relay is very difficult before a actual fault occurs. This paper reports a diagnosis expert system to verify the correctness of the relay setting by using the operation results in the power system fault simulation.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.1161-1165
• /
• 2005

Due to the miniaturization of electrical components and assembles on signal circuits, transient overvoltages caused by switching operation or lightning surges have become more interesting concern to the field of electrical engineering. In this paper, the development of surge protective devices(SPDs) that can protect sensitive signal device on shipboard from overvoltages are described. Two kinds of SPDs are designed and tested by using a combination surge generator which can produce the standard impulse current of 8/20${\mu}s$ 2.1kA according to the IEC 61000-4-5 standard. From the simulation and experimental results, it is confirmed that the proposed SPDs have an enough protection performance with a low insertion loss and a low clamping voltage.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.107-109
• /
• 1999

In the point of view protective relay, the selectivity and sensitivity is very important in its performance. The correct setting of the relay parameter is required. The verification of accurate setting for the protective relay is very difficult before a actual fault occurs. In this paper, we proposed the diagnosis expert system as a method to verify the correctness of the relay setting. The developed system proved effectiveness through the tests on the real systems.

• 전기학회논문지P
• /
• 제55권4호
• /
• pp.183-189
• /
• 2006

In this work, the digital simulator for testing of digital protective relay is presented. The proposed simulator software has EMTP simulation data file conversion, sequence waveform generation, user define simulation data generation, communication engine, data analysis engine and measurements function etc. The simulator hardware is designed using 32bit floating point DSP architecture to achieve flexibility and high speed operation. This simulator is tested to evaluate the performance of relay simulator by using a output data of simulation model on EMTP.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.1210-1212
• /
• 1998

The complexity of newly developed protection algorithm and higher performance requested by the user makes the software embedded in the protective relay much harder to develop and maintain. The versatility of 32bit microprocessor and the availability of cheaper memory semiconductors introduced the fertile developing background for the protective relay developers. The use of component object model(COM) in the software developing process enables the developer to write much complex code in the easy and safe way and to maintain the code easily, too. And the aid of the COM library, the distributed computing environment will be expected to appear by the use of the COM programming model in the protective relay firmware program.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.2902-2904
• /
• 1999

Protective relay in power system play a prominent part, Simulators for the relay test were introduced in early 1980's, A number of open loop designs have been developed and Recently, several developments of real-time simulators have been reported. But they are very high cost. And then they are difficult to apply for relay testing in small business. This paper presents the structure and performance of a new pc based simulator for digital protective relay testing.

• Structural Engineering and Mechanics
• /
• 제10권6호
• /
• pp.561-575
• /
• 2000

Microvibration of high technology facilities, such as semiconductor plants and facilities with high precision equipments, due to nearby road and rail traffic has attracted considerable attention recently. In this paper, a preliminary study is conducted for the possible use of various protective systems and their performance for the reduction of microvibration. Simulation results indicate that passive base isolation systems, hybrid base isolation systems, passive floor isolation systems, and hybrid floor isolation systems are quite effective and practical. In particular, the performances of hybrid floor isolation systems are remarkable. Further, passive energy dissipation systems are not effective for the reduction of microvibration. Finally, the protections against both microvibration and earthquake are also investigated and presented.