• Journal of Applied Biological Chemistry
• /
• v.59 no.3
• /
• pp.179-188
• /
• 2016

This study is aimed to evaluate the protective effect of Gastrodiae rhizoma and steamed, dried & fermented Gastrodiae rhizoma on Lipopolysaccharide (LPS)-induced hepatic injury in the mice model. Sample was selected to GR0F0 (not processed gastrodia rhizome) and GR6F4 (fermented with Saccharomyces cerevisiae before steamed and dried 6 times) based on 1,1-diphenyl-2-picrylhydrazyl, 2,2'-azinobis-3-ethyl-benzothiazoline-6-sulfonic acid, and High-performance liquid chromatography analysis. Mice were randomly divided into 4 groups - Normal group, vehicle group (LPS treated), GR0F0 group (fed GR0F0 before LPS treated) and GR6F4 group (fed GR6F4 before LPS treated) with 6 mice in each group. GR0F0 group and GR6F4 group were fed each extract 200 mg/kg/day during 8 days. LPS 20 mg/kg injected to the experimental groups as abdominal injection. We measured aspartate aminotransferase, alanine amino-transferase in serum. GR0F0 and GR6F4 showed a significant decrease compared to the vehicle group. As a result of measuring the ROS, GR6F4 group showed a significant reduction in both the serum and liver tissues compared to the vehicle group. GR0F0 group showed a significant reduction only in the liver tissues. Activator protein-1, cyclooxygenase-2, and Inducible nitric oxide synthase were significantly decreased GR0F0 group and GR6F4 group. But tumor necrosis factor alpha only showed a significant reduction in GR6F4 group. GR0F0 and GR6F4 groups against liver damage in mice with LPS. That showed significant effects on anti-oxidant and anti-inflammatory action. The effects of GR6F4 group showed superior results compared to GR0F0 group. Therefore, Steamed, dried & fermented Gastrodia rhizoma was might have a protective effect on liver injury.

• Journal of the Korea Concrete Institute
• /
• v.25 no.5
• /
• pp.485-496
• /
• 2013

In recent years, frequent terror or military attacks by explosion or impact accidents have occurred. Examplary case of these attacks were World Trade Center collapse and US Department of Defense Pentagon attack on Sept. 11 of 2001. These attacks of the civil infrastructure have induced numerous casualties and property damage, which raised public concerns and anxiety of potential terrorist attacks. However, a existing design procedure for civil infrastructures do not consider a protective design for extreme loading scenario. Also, the extreme loading researches of prestressed concrete (PSC) member, which widely used for nuclear containment vessel, gas tank, bridges, and tunnel, are insufficient due to experimental limitations of loading characteristics. To protect concrete structures against extreme loading such as explosion and impact with high strain rate, understanding of the effect, characteristic, and propagation mechanism of extreme loadings on structures is needed. Therefore, in this paper, to evaluate the impact resistance capacity and its protective performance of bi-directional unbonded prestressed concrete member, impact tests were carried out on $1400mm{\times}1000mm{\times}300mm$ for reinforced concrete (RC), prestressed concrete without rebar (PS), prestressed concrete with rebar (PSR, general PSC) specimens. According to test site conditions, impact tests were performed with 14 kN impactor with drop height of 10 m, 5 m, 4 m for preliminary tests and 3.5 m for main tests. Also, in this study, the procedure, layout, and measurement system of impact tests were established. The impact resistance capacity was measured using crack patterns, damage rates, measuring value such as displacement, acceleration, and residual structural strength. The results can be used as basic research references for related research areas, which include protective design and impact numerical simulation under impact loading.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.39 no.3
• /
• pp.195-203
• /
• 2013

In this study, antioxidative effects of the extracts of different species and flowering periods of Inula britannica were investigated. According to the free radical (1,1-diphenyl-2-picrylhydrazyl, DPPH) scavenging activity of the extracts, The I. britannica var. chinensis flower extract (500 ${\mu}g/mL$) was measured in a 79.89% free radical scavenging activity, but the flower extracts of similar species (I. britannica var. linariaefolia Regel, I. britannica var. ramosa, I. salicina var. asiatica) did not show any effect on the free radical scavenging activity. The effects of the free radical scavenging activity of I. britannica var. chinensis flower extracts were exhibited in the order of full bloom (93.68%), bud (43.28%), and fallen blossom (14.11%). Next, we established optimum condition of extract solvent, temperature, extraction time. The extract from ethanol at $60^{\circ}C$ showed the most free radical scavenging activity among other conditions and extraction time not relevant in free radical scavenging activity. The protective effects of the extract of I. britannica var. chinensis flower on the photohemolysis of human erythrocytes by using rose bengal were increased in a concentration-dependent manner (5 ~ 50 ${\mu}g/mL$). In particular, the extract in 50 ${\mu}g/mL$ concentration exhibited better protective activity (${\tau}_{50}$ = 116.1 min) than (+)-${\alpha}$-tocopherol (${\tau}_{50}$ = 73.44 min), which is a known lipophilic antioxidant. Principle component of I. britannica var. chinensis flower was identified as quercetin of flavonoids by high-performance liquid chromatography (HPLC). These results indicate that the extract of I. britannica var. chinensis flower can function as antioxidants in biological systems, particularly skin exposed to UV radiation by scavenging free radical and $^1O_2$, and protect cellular membranes against ROS. It is concluded that the antioxidative effects of the extract of I. britannica var. chinensis flower could be applicable to functional cosmetics.

• Journal of the Korean Society of Radiology
• /
• v.17 no.3
• /
• pp.441-447
• /
• 2023

Lead(Pb), which is currently mainly used for shielding purposes in the medical radiation, has excellent radiation shielding functions, but is continuously exposed to radiation directly or indirectly due to the harmfulness of lead itself to the human body and the inconvenience caused by its heavy weight. Research on shielding materials that are human-friendly, lightweight, and convenient to use that can block risks and replace lead is continuously being conducted. In this study, based on the commonly used polyethylene terephthalate (PET) film and the fabric material used in actual radiation protective clothing, a multi-layer thin film was realized through sputtering and vacuum deposition of bismuth, tungsten, and tin, which are metal materials that can shield radiation. Thus, a shielding film was produced and its applicability as a radiation shielding material was evaluated. The radiation shielding film was manufactured by establishing the optimized conditions for each shielding material while controlling the applied voltage, roll driving speed, and gas supply amount to manufacture the shielding film. The adhesion between the parent material and the shielding metal thin film was confirmed by Cross-cut 100/100, and the stability of the thin film was confirmed through a hot water test for 1 hour to measure the change of the thin film over time. The shielding performance of the finally realized shielding film was measured by the Korea association for radiation application (KARA), and the test conditions (inverse wide beam, tube voltage 50 kV, half layer 1.828 mmAl) were set to obtain an attenuation ratio of 16.4 (initial value 0.300 mGy/s, measured value 0.018 mGy/s) and damping ratio 4.31 (initial value 0.300 mGy/s, measured value 0.069 mGy/s) were obtained. by securing process efficiency for future commercialization, light and shielding films and fabrics were used to lay the foundation for the application of films to radiation protective clothing or construction materials with shielding functions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.557-564
• /
• 2009

In recent years, there have been numerous explosion-related accidents due to military and terrorist activities. Such incidents caused not only damages to structures but also human casualties, especially in urban areas. To protect structures and save human lives against explosion accidents, better understanding of the explosion effect on structures is needed. In an explosion, the blast overpressure is applied to concrete structures as an impulsive load of extremely short duration with very high pressure and heat. Generally, concrete is known to have a relatively high blast resistance compared to other construction materials. However, information and test results related to the blast experiment of internal and external have been limited due to military and national security reasons. Therefore, in this paper, to evaluate blast effect on reinforced have concrete structure and its protective performance, blast tests are carried out with $1.0m{\times}1.0m{\times}150mm$ reinforce concrete slab structure at the Agency for Defence Development. The standoff blast distance is 1.5 m and the preliminary tests consists with TNT 9 lbs and TNT 35 lbs and the main tests used ANFO 35 lbs. It is the first ever blast experiment for nonmilitary purposes domestically. In this paper, based on the basic experiment procedure and measurement details for acquiring structural behavior data, the blast experimental measurement system and procedure are established details. The procedure of blast experiments are based on the established measurement system which consists of sensor, signal conditioner, DAQ system, software. It can be used as basic research references for related research areas, which include protective design and effective behavior measurements of structure under blast loading.

• Journal of the Korean Electrochemical Society
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2016

Capacity of layered lithium nickel-cobalt-manganese oxide ($LiNi_{1-x-y}Co_xMn_yO_2$) cathode material can increase by raising the charge cut-off voltage above 4.3 V vs. $Li/Li^+$, but it is limited due to anodic instability of conventional electrolyte. We have been screening and evaluating various sulfone-based compounds of dimethyl sulfone (DMS), diethyl sulfone (DES), ethyl methyl sulfone (EMS) as electrolyte additives for high-voltage applications. Here we report improved cycling performance of $LiNi_{0.5}Co_{0.2}Mn_{0.3}O_2$ cathode by the use of dimethyl sulfone (DMS) additive under an aggressive charge condition of 4.6 V, compared to that in conventional electrolyte, and cathode-electrolyte interfacial reaction behavior. The cathode with DMS delivered discharge capacities of $198-173mAhg^{-1}$ over 50 cycles and capacity retention of 84%. Surface analysis results indicate that DMS induces to form a surface protective film at the cathode and inhibit metal-dissolution, which is correlated to improved high-voltage cycling performance.

• Biomolecules & Therapeutics
• /
• v.21 no.2
• /
• pp.170-172
• /
• 2013

The pyrimidine nucleoside uridine has recently been reported to have a protective effect on cultured human corneal epithelial cells, in an animal model of dry eye and in patients. In this study, we investigate the pharmacokinetic profile of uridine in rabbits, following topical ocular (8 mg/eye), oral (450 mg/kg) and intravenous (100 mg/kg) administration. Blood and urine samples were serially taken, and uridine was measured by high-performance liquid chromatography-tandem mass spectrometry. No symptoms were noted in the animals after uridine treatment. Uridine was not detected in either plasma or urine after topical ocular administration, indicating no systemic exposure to uridine with this treatment route. Following a single intravenous dose, the plasma concentration of uridine showed a bi-exponential decay, with a rapid decline over 10 min, followed by a slow decay with a terminal half-life of $0.36{\pm}0.05$ h. Clearance and volume of distribution were $1.8{\pm}0.6$ L/h/kg and $0.58{\pm}0.32$ L/kg, respectively. The area under the plasma concentration-time curves (AUC) was $59.7{\pm}18.2{\mu}g{\cdot}hr/ml$, and urinary excretion up to 12 hr was ~7.7% of the dose. Plasma uridine reached a peak of $25.8{\pm}4.1{\mu}g/ml$ at $2.3{\pm}0.8$ hr after oral administration. The AUC was $79.0{\pm}13.9{\mu}g{\cdot}hr/ml$, representing ~29.4% of absolute bioavailability. About 1% of the oral dose was excreted in the urine. These results should prove useful in the design of future clinical and nonclinical studies conducted with uridine.

• Journal of Environmental Impact Assessment
• /
• v.18 no.2
• /
• pp.111-122
• /
• 2009

The impact of Korea's joining the Convention on the Conservation of Migratory Species of Wild Animals(CMS) was analyzed to examine its merits and faults as well as to discuss Korea's opportunities. Results of the analysis based on the agenda and decisions of the Conferences of the Parties, the parties performance, and other committees meetings over the last decades indicated that the affiliation of Korea into the CMS could provide various advantages and opportunities for Korea. First, Korea could upgrade its conservation activities regarding migratory species to the global aspects. Second, Korea could take initiatives for conservation of the migratory species in the Far East Asia. Third, Korea would have a better system in forecasting and problem-solving against the epidermic Avian Influenza through systematic cooperation with the CMS parties and other related international regimes. Finally, Korea will be in a better position to generate statistical data and to develop techniques to reduce the by-catches of the sharks and whales. Korea has already provided a fair and protective institutions for most of the migratory endangered species listed under Appendix I and II of the CMS. This implies that Korea may not require additional major changes to the basic acts and/or legislation. Joining the CMS may negatively impact on the fisheries and related businesses related to whales and sharks around the Ulsan and Pohang provinces. However, the obligation to protect whales and sharks demanded by the CMS is regarded as an acceptable article in Korea according to the analysis of the existing policies and scientific aspects. Nevertheless, if the joining the CMS should generate irreversible hardship for local people's livelihood and cultural aspects, Korea may ask for reservations on particular activities. Overall, we suggest that by joining the CMS, Korea could see various advantages and promotion in national policy.

• Journal of the Society of Disaster Information
• /
• v.16 no.3
• /
• pp.421-429
• /
• 2020

Purpose: The purpose of this study is to present step-by-step countermeasures to prevent fires in sandwich panel warehouses and to enhance on-site fire response capabilities. Method: Interviews of firefighters related to fire sites, advice from fire experts, and experiments on protection performance were conducted to draw up measures for each element to strengthen on-site response capabilities. Result: The fire safety management checklist for warehouse fire safety managers and the installation standards for wall protection of sandwich panel warehouses are presented. In addition, Standard Operational Procedures(SOP) for fire application of sandwich panel warehouses were established for firefighters on-site. Conclusion: Through this study, step-by-step fire safety measures were established for preventing, protecting and suppressing fires in sandwich panel warehouses.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.1
• /
• pp.37-44
• /
• 2016

Optical fiber temperature sensing systems have incomparable advantages over traditional electrical-cable-based monitoring systems. However, the fiber optic interrogators and sensors have often been rejected as a temperature monitoring technology in real-world industrial applications because of high cost and over-specification. This study proposes a multiplexed fiber optic temperature monitoring sensor system using an economical Optical Time-Domain Reflectometer (OTDR) and Hard-Polymer-Clad Fiber (HPCF). HPCF is a special optical fiber in which a hard polymer cladding made of fluoroacrylate acts as a protective coating for an inner silica core. An OTDR is an optical loss measurement system that provides optical loss and event distance measurement in real time. A temperature sensor array with the five sensor nodes at 10-m interval was economically and quickly made by locally stripping HPCF clad through photo-thermal and photo-chemical processes using a continuous/pulse hybrid-mode laser. The exposed cores created backscattering signals in the OTDR attenuation trace. It was demonstrated that the backscattering peaks were independently sensitive to temperature variation. Since the 1.5-mm-long exposed core showed a 5-m-wide backscattering peak, the OTDR with a spatial resolution of 40 mm allows for making a sensor node at every 5 m for independent multiplexing. The performance of the sensor node included an operating range of up to $120^{\circ}C$, a resolution of $0.59^{\circ}C$, and a temperature sensitivity of $-0.00967dB/^{\circ}C$. Temperature monitoring errors in the environment tests stood at $0.76^{\circ}C$ and $0.36^{\circ}C$ under the temperature variation of the unstrapped fiber region and the vibration of the sensor node. The small sensitivities to the environment and the economic feasibility of the highly multiplexed HPCF temperature monitoring sensor system will be important advantages for use as system-integrated temperature sensors.