• Journal of the Korean Ceramic Society
• /
• v.37 no.8
• /
• pp.760-767
• /
• 2000

Recently, the protection of construction is demanded with environmental pollution. These protect modes are use of concrete admixture, coat of protective polymer and impregnate of surface with chemicals etc. The most widely used impregnation is economical and effective. The define of Impregnation for construction protect is reacted in and consolidated substrate after absorbed. The impregnation agents are Polyesters, Acrylic monomers, Epoxy and Silicone derivatives. Commonly, because the Silane has good water repellency and environmental advantages that it widely used to water proofing agents, dampproofing agents and absorption reducer for concrete of bridges. When application of Silane, it occurs pollution and harmfulness as included organic solvent. The manufactures have tired to emulsification of Silane for the reducing of the defects. The Silane emulsion is vary unstable and does not stored long periods, and it is diminished in good properties with internal reaction. In this study we tried to emulsification of Silane for effectiveness improvement and reduce pollution and hazard and discussed properties variation of emulsion. The Silane emulsions are achieved emulsifying with W/O and O/W type surfactants. It used 0.24% PVA as protective colloid and stable phase is creamy. The creamy Silane emulsion performance as the penetration depth and water absorption rate are above 4 mm and below 0.1. It stable about 6 month at room temperature.

• Journal of the Korean Applied Science and Technology
• /
• v.4 no.1
• /
• pp.19-22
• /
• 1987

To investigate the protective action of various antioxidants on the photooxidation of rice bran oil, it was irradiated with red and visible light in presence and absence antioxidants with or without sensitizer (methylene blue). 1. Rice bran oil with and without sensitizer in chloroform-ethanol (4:1, v/v) media was largely oxidized under visible light irradiation. on the other hand, rice bran oil without sensitizer was hardly oxidized under red light irradiation. 2. Rice bran oil with sensitizer was oxidized much faster than that without. And the absorbance of it irradiated with visible was increased more than that with red light. 3. The effectiveness of antioxidants on the rice bran oil photooxidation was same order as follows: Irradiation with visible light, no addition of sensitizer ${\beta}$-carotene > dl-{$\alpha}$-tocopherol > BHT > BHA Irradiation with visible light, addition of sensitizer ${\beta}$-carotene > BHT > dl-${\alpha}$tocopherol > BHA Irradiation with red light, addition of sensitizer ${\beta}$-carotene > BHA > BHT > dl-${\alpha}$-tocopherol From these results, we concluded that rice bran oil was largely oxidized under visible light irradiation, therefore it must be protected from photooxidative deterioration by the addition of antioxidants.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.26 no.3
• /
• pp.17-26
• /
• 2020

Purpose: This paper presents research evidence that the environmental design of the doffing area in a biocontainment unit (BCU) can have a measurable impact on increasing the safety of frontline healthcare workers (HCW) during doffing of high-level personal protective equipment (PPE), and proposes optimized biocontainment unit design. Methods: From 2016 to 2019, The SimTigrate Design Lab conducted 3 consecutive studies, focusing on ways in which the built environment may support or hinder safe doffing. In the first study, to identify the risky behaviors, we observed 56 simulation exercises with HCWs in 4 BCUs and 1 high-fidelity BCU mockup. In the second study, we tested the effectiveness of a redesigned doffing area on improving the HCWs performance and used simulation, observation, and rapid prototyping in 1 high-fidelity mockup of a doffing area. In a follow-up study, we used simulation and co-design with HCWs to optimize the design of a safer doffing area in a full-size pediatric BCU mock-up. Results: We identified 11 specific risky behaviors potentially leading to occupational injury, or contamination of the PPE, or of the environment. We developed design strategies to create a space for safer doffing. In the second study, in a redesigned doffing area, the overall performance of HCW improved, and we observed a significant decrease in the number of risky behaviors; some risky behaviors were eliminated. There was a significant decrease in physical and cognitive load for the HCWs. Finally, we propose an optimized layout of a BCU for a safer process of PPE doffing. Implications: The proposed BCU design supports better staff communication, efficiency, and automates safer behaviors. Our findings can be used to develop design guidelines for spaces where patients with other highly infectious diseases are treated when the safety of the patient-facing HCWs is of critical importance.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.6.2-6.2
• /
• 2010

Stainless steel is widely known to have superior corrosion properties. However, in some harsh conditions it still suffers various kinds of corrosions such as galvanic corrosion, pitting corrosion, intergranular corrosion, chloride stress corrosion cracking, and etc. For the corrosion protection of stainless steel, the ceramic coatings such as protective silica film can be used. The sol-gel coating technique for the silica film has been extensively studied especially because of the cost effectiveness. It has been proved that silica can improve the oxidation and the acidic corrosion resistance of metal surface in a wide range of temperatures due to its high heat and chemical resistance. However, in the sol-gel coating process there used to engage a heat treatment at an elevated temperature like $500^{\circ}C{\sim}600^{\circ}C$ where cracks in the silica film would be formed because of the thermal expansion mismatch with the metal. The cracks and pores of the film would deteriorate the corrosion resistance. When the heat treatment temperature is reduced while keeping the adhesion and the density of the film, it could possibly give the enhanced corrosion resistance. In this respect, inorganic protective silica film was tried on the surface of stainless steel using a sol-gel chemical route where silica nanoparticles, tetraethoxysilane (TEOS) and methyltriethoxysilane (MTES) were used. Silica nanoparticles with different sizes were mixed and then the film was deposited on the stainless steel substrate. It was intended by mixing the small and the large particles at the same time a sufficient consolidation of the film is possible because of the high surface activity of the small nanoparticles and a modest silica film is obtained with a low temperature heat treatment at as low as $200^{\circ}C$. The prepared film showed enhanced adhesion when compared with a silica film without nanoparticle addition. The films also showed improved protect ability against corrosion.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.2
• /
• pp.77-86
• /
• 2005

The DC protection and control device for the feeding system of a Light Rail Transit(LRT) system is developed. For the development, the short circuit characteristics in the system are analyzed. As a result a protection algorithm for the DC fault selective relay (50F) is newly proposed, and principles of the DC fault selective relay, Line Test Device (LTD), DC Over Current Relay (DC OCR) are introduced From the development, the specifications and codes used to be unclear have become clarified and summarized. Moreover, the methods to examine the protective characteristics and Electromagnetic Compatibility (EMC) are established Finally, the performance and the effectiveness of the developed protective relay have been verified with the test based on IEC. For the reliability of the system, the relay has been installed and is being operated at the test track of the LRT system at Gyeong-San.

• Fashion & Textile Research Journal
• /
• v.15 no.5
• /
• pp.834-840
• /
• 2013

This study aims to suggest practical considerations for designing protective clothing with increased visibility that will have higher user acceptance by law enforcement officers. Light-emitting diode(LED) patrol vests were visually and structurally assessed, and 125 police officers' responses from surveys about user acceptance of the vest were analyzed. The current LED patrol vest was designed for enhanced safety of police officers by increasing visibility in the dark. However, the user acceptance rate of the LED patrol vest indicates low use of and low satisfaction with the vest despite its enhanced safety features. In particular, differences in materials, design, functionality of the pockets and size of the vest depending on the hours worked, were statistically significant. The police officers' responses suggest areas of improvement in design, materials, ease of movement, size and functionality. Key issues include 'tactile discomfort'; 'impeded vision from the glare of the LED'; 'frequent malfunctions of the LED'; 'impossible repair of the broken LED units'; 'no user feedback'; 'inconvenient to replace batteries'; 'brittle materials' and 'unpleasing look'. To increase user acceptance, designer should incorporate context-awareness, a convenient user interface, a modular design approach, first responders' self-image as public servants in relation to their aesthetic perspectives of their uniforms, and scientific evaluation of the effectiveness of the intended functions of the clothing. Suggested implications for designing the LED patrol vest can be applied to designing other functional/protective clothing for intended end users with special needs.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.11
• /
• pp.227-232
• /
• 2021

The 「Act on Special Cases concerning the Punishment of Crimes of Domestic Violence」 still has various problems in the legal system and enforcement process. Contrary to the original intention of the legislation, it is operated very passively in terms of state intervention and punishment of domestic violence actors in actual operation. Even if it is treated as a home protection case, if you look at the details of the protection disposition, there is a problem that the decision on the protection disposition is biased towards a specific type of protection disposition. In order to improve this, the need for cooperation and active intervention between state agencies is required. In addition, it is necessary to establish a legal basis for a request for personal protection by recognizing the status of a victim who reported domestic violence as a crime reporter. In addition, in order to secure the effectiveness of the protective disposition, it is necessary to strengthen sanctions for non-compliance or violations of the protective disposition.

• Journal of Radiation Protection and Research
• /
• v.39 no.2
• /
• pp.109-117
• /
• 2014

Nuclear emergency planning is to plan sheltering, evacuation and iodine prophylaxis for the residents living in the area where the emergency plan is needed, the area is confirmed based on the dose assessment using the source-term through an accident analysis and the data measured from meteorological tower. In this study, the does change before and after protective measures was assessed stochastically based on the one year meteorological data in the condition of the maximum hypothetical accident which can be considered at the research reactor 'HANARO', and the optimized protective measures were derived based on the reference levels defined as a residual dose by ICRP 2007 recommendation which can be applied in a emergency exposure situation. The optimized protective measures for the HANARO in the maximum hypothetical accident were the evacuation to radius 300 m, the sheltering from 300 m to 800 m, the iodine prophylaxis only for the emergency workers under the protective measures for non emergency workers.

• The Journal of the Korea Contents Association
• /
• v.21 no.5
• /
• pp.627-637
• /
• 2021

Many efforts have been made to prevent alcohol related harms such as health problems and socio-economic problems. Among them, the method of improving drinking behavior at the individual level is the most direct intervention. The effectiveness of the use of protective behavior strategies(PBS) has been widely known in Western countries. The purpose of this study is to empirically verify whether the use of PBS affects alcohol related harms in Korean adults. The survey has been conducted on 2,000 adult men and women. As a result, it is found that the use of PBS reduced alcohol related harms in adults. Among the PBS, the biggest impact on alcohol related harms is the area related serious harm reduction strategy, followed by restrictions on 'manner of drinking'. The effects of 'limiting/ stopping of drinking' is not significant. In addition, drinking frequency, binge drinking, and drinking motivations have significant positive effects on alcohol-related harms, and only social motivation has a negative effect. In this work, we propose follow-up studies on identifying relationships between protective behaviors and alcohol related factors through longitudinal studies and strengthening the use of protective behavior strategies that applied to the refined target populations.

• Journal of the Korean Applied Science and Technology
• /
• v.39 no.5
• /
• pp.644-651
• /
• 2022

The skin is the largest organ of the human body and protects the inside of the body. Ultraviolet rays cause various inflammatory reactions in the skin, including photoaging and oxidative damage. The purpose of this study is to investigate the protective effect of Saponaria extract by irradiating UVB on fibroblasts. In this study, the effectiveness of Saponaria showing protective activity against UVB-induced cytotoxicity, oxidative cell death, and NO and PGE₂ production was evaluated. HS68 cells were irradiated with UVB(120 mJ/cm²) and treated with Saponaria extract at various concentrations of 100, 200, and 400 ㎍/mL for 24 hours. Intracellular reactive oxygen species (ROS) generated by ultraviolet B were detected using a spectrofluorometer after DCF-DA staining. Lipid peroxidation was also analyzed by measuring the level of 8-isoprostane secreted into the culture medium. As a result, treatment with Saponaria extract effectively inhibited UVB-induced cytotoxicity. Oxidative cell damage was mediated by PGE₂ in UVB-induced HS68 fibroblasts, which was significantly inhibited by Saponaria extract treatment. In addition, it was evaluated that the protective effect of these extracts was mediated by the inhibition of intracellular ROS production and lipid peroxidation in a concentration-dependent manner. These results suggest that Saponaria extract can be used as an anti-aging functional material because it inhibits skin damage mediated by oxidative stress caused by UVB and exhibits a cellular protective effect.