• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.2
• /
• pp.225-236
• /
• 2016

Objectives: Nanomaterials have been used in various fields. As use of nanoproducts is increasing, workers dealing with nanomaterials are also gradually increasing. Exposure assessments for nanomaterials have been carried out for protection of worker's health in workplace. Exposure studies were mainly focused on manufacturing processes, but these studies on after-treatment processes such as refinement, weighing, and packing were insufficient. So, we investigated exposure characteristics of particles during after-treatment processes of $Al_2O_3$ fibers and Ni powders. Methods: Mass-production of Ni powder process was carried out in enclosed capture-type canopy hood. In a developing stage, $Al_2O_3$ was handled with a local ventilation unit. Exposure characteristics of particles were investigated for $Al_2O_3$ fiber and Ni powder processes during the periods of 10:00 to 16:00, 20 May 2014 and 13:00 to 16:00, 21 May 2014, respectively. Three real-time aerosol instruments were utilized in exposure assessment. A scanning mobility particle sizer(SMPS, nanoscan, model 3910, TSI) and an optical particle counter(OPC, portable aerosol spectrometer, model 1.109, Grimm) were used to determine the particle size distribution in the size range of 10-420 nm and $0.25-32{\mu}m$, respectively. In addition, a nanoparticle aerosol monitor(NAM, model 9000, TSI) was used to measure lung-deposited nanoparticle surface area. Membrane filters(isopore membrane filter, pore size of 100 nm) were also used for air sampling for the FE-SEM(model S-5000H, Hitachi) analysis using a personal sampling pump(model GilAir Plus by 2.5 L/min, Gilian). Conclusions: For Ni powder after-treatment process, only 27% increase in particle concentration was found during the process. However, for $Al_2O_3$ fiber after-treatment process, significant exposure(1.56-3.34 times) was observed during the process.

• The Korean Society of Law and Medicine
• /
• v.15 no.1
• /
• pp.211-237
• /
• 2014

Because of unpredictability and high possibility of abnormal results by clinical trials compared to general medical behaviors, a procedure for ensuring with sufficient explanations by investigators must be secured. Therefore, in a sequence of clinical trials, what kinds of scope, stage, and method of explanations provided by investigators, including doctors or researchers, to trial subjects are closely related to the compensation for damages by violation of liability for explanation. In case of application of clinical trials to patients who have critical illness such as cancer, issues of "Quality of Life" regarding trial subjects, cancer patients, should be discussed. Especially, in case of clinical trials for terminal cancer patients, the right of subjects' self-determination, which is a fundamental principle in medical behaviors, should be discussed. The right of self-determination includes participation in clinical trials for the possibility of life-sustaining even a little bit, or no participation in clinical trials in order to have a time for completing the rest of his life. Like this, if the extent and scope of explanations related to the issues of "Quality of Life" are raised as main issues, the evaluation of "Quality of Life", should be a prerequisite. In many occasions, realistically, despite bad results such as deaths or serious adverse drug reactions after clinical trials, it may not be easy for compensating to trial subjects or their survivors, who requested civil compensation for damage. Futhermore, in abnormal results after concealment of clinical trials or performance of clinical trials without permission, and in the case of trial subjects' failures of proving proximate cause between the clinical trials and abnormal results, problematic results such as no protection to the trial subjects could be occurred. In performing clinical trials, investigators should provide sufficient explanations for trial subjects and secure voluntary informed consents from the trial subjects. Therefore, clinical trials without trial subjects' permissions and the informed consent process violate trial subjects' rights of self-determination, and the investigators shall be liable for compensation for damages. Then, issues might be addressed are what are essential contents of patients' "rights of self-determination" infringed by clinical trials without subjects' permissions. Two perspectives about patients' rights of self-determination might be considered. One perspective regards physical distress of patients (subjects) from therapies without sufficient explanations as the crux of the matter. The other perspective regards infringement of human dignity caused by being subjects without permission as the crux of the matter irrespective of risks' big and small influences. This research follows perspective of the latter. Forming constant fiduciary relation between investigators (doctors) and subjects (patients) pursuant medical contracts, and in accordance with this fiduciary relation, subjects, who are patients, have expectations of explanations and treatments by the best ways. If doctors and patients set this forth as a premise, doctors should assume civil liability when doctors infringe patients' expectations.

• Research in Plant Disease
• /
• v.12 no.1
• /
• pp.40-45
• /
• 2006

The plant defence activator, Acibenzolar-S-methyl [benzo (1,2,3) thiadiazole-7-carbothioic acid-S-methyl ester, ASM] was assayed on tomato seedlings for its ability to induce resistance against Botrytis cinerea, the causal agent of gray mold in tomato. Pre-treatment of plants with ASM reduced the severity of the disease as well as the growth of the mycelium in plants. In ASM treated plants, reduction in disease severity (up to 55%) was correlated with suppression of mycelia growth (up to 46.5%) during the time course of infection. In plants treated with ASM, activities of peroxidase were determined as markers of resistance. Applications of ASM induced Progressive and significant increase of the enzyme in locally treated tissues. Such responses were expressed earlier and with a much higher magnitude when ASM-treated seedlings were challenged with the pathogen, thus providing support to the concept that a signal produced by the pathogen is essential for triggering enhanced synthesis and accumulation of the enzymes. No such activities were observed in water-treated control plants. Therefore, the slower symptom development and reduction in mycelium growth in ASM treated plants might be due to the increase in activity of oxidative and antioxidative protection systems in plants.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.1
• /
• pp.45-53
• /
• 2000

To analyze the photodegradation mechanism of materials for fisheries facilities which stand for considerable time immediately under or even partly above the water surface, such as cage collar, cage net, stationary fishing gear, egc. after 900 hours exposure, weathering experiments on 3 kinds of netting twines like dyed polyethylene(PE) and nylon, and non-treated high strength PE(Hi-PE) were carried out by using xenon light source. The results obtained are as follows : It was observed by scanning electron micrograph(SEM) that a good protection by pigments was obtained in PE and nylon specimen, while crack was rapidly progressed at the surface of Hi-PE one owing to etching by UVR. There was a little increase in density resulting from reorientation of polymer chain, chain scission, etc. in Hi-PE specimen. A wide angle X-ray diffraction showed that 3 kinds of specimens had no fundamental changes in polymer crystalline structure considering each 2$\theta$ of diffraction peak. Remaining tenacity of netting twines was in order of PE, nylon, and Hi-PE after having been exposed to the effect of 900 hours. PE and nylon treated with stuffs were shown to be more resilient than non-treated Hi-PE as confirmed by SEM.

• Fire Science and Engineering
• /
• v.31 no.6
• /
• pp.8-15
• /
• 2017

Most fire victims succumb to smoke inhalation, and fire smoke toxicity from interior materials is increasing with increased use of plastics. Large amounts of hazardous effects of smoke are related to deposition of smoke particles in respiratory tracts, and deposition characteristics are influenced by size distribution of particles. Thus, it is essential to know the size distribution of smoke particles from plastics for hazard analysis of fire smoke. In a recent study, it has been shown that size distributions of smoke particles from PP are different from wood in many aspects. In order to know whether other plastics show the same characteristics as PP, size distributions of smoke particles from four plastic materials (LDPE, PA66, PMMA, and PVC) were measured in real time under each fire type with various temperature and oxygen supply. In this study, smoke particles from different plastics were generated uniformly by using steady-state tube furnace method provided in ISO/TS 19700. Their size distributions were measured by using an electrical low pressure impactor (ELPI). Results of measurements showed that size distributions of smoke particles from these four plastic materials were similar to those from PP in many aspects. However, they were distinctively different from those of wood.

• Fire Science and Engineering
• /
• v.26 no.3
• /
• pp.35-39
• /
• 2012

This paper analyzes the combustion diffusion pattern when a water purifier is artificially ignited outside and inside in order to provide data to examine the cause of fire of a water purifier damaged by fire. The analysis result of the combustion diffusion pattern of a water purifier shows that the combustion diffused at a higher speed when it was ignited inside the purifier than when ignited outside. It took approximately 360 seconds for the water purifier to be half-burned when ignited on the outside, and approximately 180 seconds when ignited from inside. That is, it is thought that the internal combustion speed is higher because the internal ignition causes the generated heat to be accumulated and radiated instantly. It was observed that the water purifier damaged by fire caused by external ignition showed a uniform carbonization pattern and the carbide burned down at the bottom were gradually deposited. The water purifier damaged by internal ignition showed a relatively clear boundary of carbonized surface, which formed a V-pattern. The difference in the combustion patterns presents an objective base from which to determine where the fire started. By the time the purifier was half-burned by fire, the built-in fuse had not melted and the power supply protection device did not operate. In addition, as was found in the case of the fuse damaged by a general fire, carbonization occurred at the metal holder, and it is thought that this fact may be used as a basis from which to determine the cause of a fire.

• Journal of radiological science and technology
• /
• v.39 no.3
• /
• pp.313-321
• /
• 2016

Placenta accrete patients whose mother mortality rates are rather high due to massive bleeding during childbirth need to have Prophylactic placement of Internal Iliac Artery Balloon Occlusion Catheters procedure to reduce amount of blood loss and inoperative transfusion. Nevertheless, studies for mothers inevitably exposed to dose during PIIABOCs procedure have not been published many yet. Therefore, this study is to investigate exact information on radiation dose exposed to fetus during PIIABOCs procedure. Average effective dose of fetus per organ is 2.38~8.83 mGy, measured highest at beam center and followed by eyeball, stomach and bladder. The result showed that the longer fluoroscopy time is used, the closer beam center is and the thicker abdominal thickness is, the more effective dose on fetus is increasing. When using the collimator and protection shown to decrease the effective dose and when using higher the patient table shown to decrease the effective dose. It has been reported that the threshold of deterministic effect is about 100mGy. Deterministic effect was regarded as a factor that would influence on fetus exposed by medical radiation than stochastic effect. Consequently, it concluded that dose exposed on fetus in PIIABOCs procedure was approximately 10% of threshold of deterministic effect with effective dose of 0.49~18.27 mGy.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.2
• /
• pp.5-21
• /
• 2019

The purpose of this study is to investigate and analyze the cadastral transformation process of Dokdo-ri based on the institutional concept of the cadastre, while presenting the cadastral characteristics of Dokdo-ri therefrom. For this purpose, both the literature search method and the Internet search method were used. As for the analysis method, descriptive analysis method and comparative analysis method were used. The findings support that the cadastral characteristics of Dokdo-ri is drawn as follows: First, from the physical point of view, the cadastral characteristics of Dokdo-ri shows that the territory is given by the smallest lot numbers in the country and that the territory is also given by the land lot number consisting of small size lots without continuing the ground for which the cadastral resurvey project was carried out for the first time. Second, in terms of the rights, the cadastral characteristics of Dokdo-ri shows that the entire area given by the lots is owned by a single owner and no ownership has been changed. Third, in terms of its value, the cadastral characteristics of Dokdo-ri shows that it is the only area given by the lots of which the officially assessed individual land price has never been decreased in the entire lots. Fourth, when it comes to presenting the cadastral characteristics of Dokdo-ri in terms of the use control/restriction, the consciousness of preserving Dokdo-ri and the consciousness of enhancing real territory are confronted but due to the Cultural Heritage Protection Act etc, the cadastre turned out to be a very passive cadastral work.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.1
• /
• pp.64-72
• /
• 2007

Humans are exposed by a range of pollutants in soil via exposure routes such as ingestion, inhalation, and dermal contact. Risk assessment is a process of evaluating the adverse health effects of chemicals as a result of exposure to stressors, and it is a very useful tool to establish the cleanup goals in contaminated lands. In the exposure assessment that is one of main process in risk assessment, exposure factor plays a significant role to quantify the intake of soil pollutants. However there is a very limited study about the exposure factor applicable to Korea. In this study, we compared the exposure factors applied by the developed countries including the United States and representative European countries, and suggested the exposure factor that might be suitable in our situation. The exposure factors considered in this study include average lifetime, body weight, (exposed) skin surface area, life time, skin absorption, soil-skin adherence factor, and soil ingestion rate. This information is needed to quantitatively estimate the intake of soil pollutants in contaminated lands.

• Analytical Science and Technology
• /
• v.13 no.5
• /
• pp.608-615
• /
• 2000

A determination method of trace nickel and cobalt in water samples was studied and developed by adsorbing their complexes on ion exchange resin suspension. The analytical ions were formed as complexes with a ligand of APDC (ammonium pyrrolidinedithiocarbamate) and adsorbed on anion exchange resin of Dowex 2-X8. After the suspension was filtered out with membrane filter, the complexes were dissolved in HCl solution by an ultrasonic vibrator for ET-AAS determination. Several conditions were optimized as followings. pH of sample solution: 5.0, amount of ligand APDC: more than 430 times in mole ratio, the type and concentration of acid: 0.1 M HCl, and vibration time: 7 minutes. The addition of palladium in the HCl solution could improve the reproducibility and sensitivity by a matrix modification in the absorbance measurement. This procedure was applied for the analysis of three kinds of real water samples. The detection limits equivalent to 3 times standard deviation of blank were Co 0.36 ng/mL and Ni 0.27 ng/mL and recoveries in spiked samples were 99-102% for cobalt and 100-105% for nickel.