• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제7권2호
• /
• pp.27-36
• /
• 2001

This study aims to provide space organization of the Postpartum Care Center and basic data for architectural planning in the reasonable size. Nurturing method of infants at independent Postpartum Care Center combines rooming-in and non rooming-in and space organization is planned accordingly. Types of the existing floor plans are classified as a type centered on maternity protection room, a type of the separate space for multipurpose, a near type to the infants' room. New types of plane are presented as follows a core type concentrate upon nurse room, the infants' room and the same environmental and balanced corridors between the both. When an average capacity of 20 at Postpartum Care Center is planned, proper suitable floor space of Postpartum Care Center is above $753.9m^2$ and $37.69m^2$ per postpartum woman is required. It is indicated that an average floor space per postpartum woman of the reviewed facilities is smaller than one of the Postpartum Care Center in a plan and plane distributed by function too lack in nursing space. Expansion of space for the Postpartum Care Center is generally required, also the enlargement of nursing space is necessary to be harmonized with the management of a medical facilities and those mutual cooperation.

• Journal of Electrical Engineering and Technology
• /
• 제4권1호
• /
• pp.111-117
• /
• 2009

This paper presents the characteristics of leakage currents flowing through zinc oxide (ZnO) surge arrester elements under the combined direct-current (DC) and 60 Hz alternating-current (AC) voltages. The current-voltage characteristic curves (I-V curves) of the commercial ZnO surge arrester elements were obtained as a function of the voltage ratio a. At constant peak value of the combined DC and AC voltage, the resistive leakage current of the ZnO blocks was significantly increased as the voltage ratio $\alpha$ increased. The I-V curves under the combined DC and AC voltages were placed between the pure DC and AC characteristics, and the cross-over phenomenon in both the I-V curves and R-V curves was observed at the low current region. The ZnO power dissipation for DC voltages was less than that for AC voltage in the pre-breakdown region and reversed at higher voltages.

• 조명전기설비학회논문지
• /
• 제12권1호
• /
• pp.51-57
• /
• 1998

본 논문은 구동신호 위상제어 기능을 갖는 SIT고주파공진 인버터를 제안하였다. SIT를 이용한 위상제어형인버터는 낮은 스위칭 손실로서 높은 스위칭 주파수의 전력변환을 실현시킬 수 있다. 특히 2단위 인버터의 출력전압을 직렬로 연결하여 높은 출력을 얻을 수 있다. 과전류에 대해서 보호회로를 이용한 시스템의 안정성과 그리고 PLL에 의해 부하변화에 따른 자동추종제어를 실현하였다. 특히 제안된 인버터는 고주파에서도 거의 정현파에 가까우며, 스위칭 주파수 범위는 180∼220〔kHz〕이고, 2〔kW〕의 유도가열에 응용하였다. 본 인버터의 동작 특성에 대해서 이론과 실험결과를 비교 검토하였다.

• 조명전기설비학회논문지
• /
• 제26권5호
• /
• pp.79-84
• /
• 2012

As the huge economical loss and function paralysis of information technology-based systems can be caused by the misoperation of residual current devices(RCDs) due to surge voltages and currents, RCDs shall not operate by surge currents. In this paper, in order to evaluate the reliability of residual current operated circuit-breakers with integral overcurrent protection for household and similar uses((RCBOs) stressed by surges, the unintended trip characteristics of RCBOs under surge currents were experimentally investigated using the combination wave generator. Seven different types of single-phase RCBOs being present on the domestic market were investigated according to KS C IEC 61009-1 standard. As a result, all kinds of specimens were satisfied the requirements for 0.5 [${\mu}s$]/100[kHz] ring wave impulse currents. Most of specimens stressed by the 8/20[${\mu}s$] impulse current tripped at least one or more, and some of them were broken down during consecutive tests. It was found that only one type of specimens meets the L-N mode immunity to the combination wave of 1.2/50[${\mu}s$] impulse voltage and 8/20[${\mu}s$] impulse current.

• 한국표면공학회지
• /
• 제36권1호
• /
• pp.74-78
• /
• 2003

The corrosion failure of electronic devices has been a major reliability concern lately. This failure is an ongoing concern because of miniaturization of integrated circuits (IC) and the increased use of polymers in electronic packaging. Recently, plasma-polymerized cyclohexane films were considered as a possible candidate for a interlayer dielectric for multilever metallization of ultra large scale integrated (ULSI) semiconductor devices. In this paper the protective ability of above films as a function of deposition temperature and RF power in an 3.5 wt.% NaCl solution were examined by polarization measurement. The film was characterized by FTIR spectroscopy and contact angle measurement. The protective efficiency of the film increased with increasing deposition temperature and RF power, which induced the higher degree of cross-linking and hydrophobicity of the films.

• 디지털산업정보학회논문지
• /
• 제9권4호
• /
• pp.103-110
• /
• 2013

In Information Technology era, various amazing IT technologies, for example Big Data, are appearing and are available as the amount of information increase. The number of counselling for violation of personal data protection is also increasing every year that it amounts to over 160,000 in 2012. According to Korean Privacy Act, in the case of treating unique personal identification information, appropriate measures like encipherment should be taken. The technologies of encipherment are the most basic countermeasures for personal data invasion and the base elements in information technology. So various cryptography algorithms exist and are used for encipherment technology. Therefore studies on safer new cryptography algorithms are executed. Cryptography algorithms started from classical replacement enciphering and developed to computationally secure code to increase complexity. Nowadays, various mathematic theories such as 'factorization into prime factor', 'extracting square root', 'discrete lognormal distribution', 'elliptical interaction curve' are adapted to cryptography algorithms. RSA public key cryptography algorithm which was based on 'factorization into prime factor' is the most representative one. This paper suggests algorithm utilizing telescoping series as a safer cryptography algorithm which can maximize the complexity. Telescoping series is a type of infinite series which can generate various types of function for given value-the plain text. Among these generated functions, one can be selected as a original equation. Some part of this equation can be defined as a key. And then the original equation can be transformed into final equation by improving the complexity of original equation through the command of "FullSimplify" of "Mathematica" software.

• 정보처리학회논문지C
• /
• 제12C권2호
• /
• pp.207-216
• /
• 2005

CC내의 보안기능(클래스-패밀리-컴포넌트)을 실제 정보보호 제품이나 PP에서 사용하는 빈도에 대한 연구결과가 없으므로, 어떤 보안기능이 중요한지를 판단하기가 어렵다. 본 논문에서는 기존의 33종의 제품유형별 PP들이 CC내의 어떤 보안기능을 사용했는지를 조사하여, CC내의 보안기능들의 사용율과 제품유형별 보안기능의 사용율을 구하였다. 이 결과는 제품의 새로운 분류, 제품유형별 개발 및 평가비 산정 등에 활용할 수 있을 것이다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2012년도 추계학술대회
• /
• pp.261-262
• /
• 2012

본 연구에서는 레저선박 및 소형선박을 위한 지능형 충돌방지 시스템에 대한 언급하고 있다. 이 시스템의 기능은 선박으로부터 이동 물체까지의 거리와 속도를 추정하고 해당 물체와의 충돌을 회피하기 위한 제어신호를 발생하는 것이다. 본 논문에서는 칼만필터를 이용하여 대상물체의 위치와 속도를 추정하는 방법에 대해 소개한다. 실제 실험단계에서는 레이저센서를 이용하여 대상물체의 거리를 계측하고 계측된 신호에 필터링을 적용하여 대상물의 위치와 속도를 검출하게 된다. 제안한 기법의 유용성을 검증하기 위해 물체의 위치 및 속도추정에 대한 시뮬레이션을 수행하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권5호
• /
• pp.2348-2365
• /
• 2018

QR codes as public patent are widely used to acquire the information in various fields. However, it faces security problem when delivering the privacy message by QR code. To overcome this weakness, we propose a secret hiding scheme by improving exploiting modification direction to protect the private message in QR code. The secret messages will be converted into octal digit stream and concealed to the cover QR code by overwriting the cover QR code public message bits. And the private messages can be faithfully decoded using the extraction function. In our secret hiding scheme, the QR code public message still can be fully decoded publicly from the marked QR codes via any standard QR Code reader, which helps to reduce attackers' curiosity. Experiments show that the proposed scheme is feasible, with high secret payload, high security protection level, and resistant to common image post-processing attacks.

• Structural Engineering and Mechanics
• /
• 제40권2호
• /
• pp.233-243
• /
• 2011

This paper presents a theoretical study of a model predictive control (MPC) strategy employed in semi-active control system with magnetorheological (MR) dampers to reduce the responses of seismically excited structures. The MPC scheme is based on a prediction model of the system response to obtain the control actions by minimizing an objective function, which can compensate for the effect of time delay that occurred in real application. As an example, a 5-story building frame equipped with two 20 kN MR dampers is presented to demonstrate the performance of the proposed MPC scheme for addressing time delay and reducing the structural responses under different earthquakes, in which the predictive length l = 5 and the delayed time step d = 10, 20, 40, 60, 100 are considered. Comparison with passive-off, passive-on, and linear quadratic Gaussian (LQG) control strategy indicates that MPC scheme exhibits good control performance similar to the LQG control strategy, both have better control effectiveness than two passive control methods for most cases, and the MPC scheme used in semi-active control system show more effectiveness and robustness for addressing time delay and protecting structures during earthquakes.