• Fire Protection Technology
• /
• s.12
• /
• pp.10-17
• /
• 1992

Dampers which being installad in air duct are Valume damper, fire damper, leakage rated damper, but among them fire damper and leakage rated damper are used for preventing the spread of flame, hot gas and smoke through the duct. this report is aimed to intorduce the test example of the multiple fire damper which was conducted F.I.L.K, simuetaneously to investigate the performent standards and Structure of the fire damper which settled in several countries.

• Journal of Radiation Protection and Research
• /
• v.42 no.3
• /
• pp.166-175
• /
• 2017

Background: This study presents food ingestion standards for radioactivity that can be applied in nuclear emergency exposure situations, and discusses the validity of the current domestic standards. Materials and Methods: This study derived food ingestion standards for radiocesium and radioiodine using domestic food intake rates and intervention levels, which serve as a basis for determining the necessity of public protective actions, and then compared them with the existing guidelines. Operational intervention levels were also derived using domestic food intake rates, and were compared with those of the International Atomic Energy Agency. Results and Discussion: The derived activity concentrations for food ingestion standards of radiocesium for infants were higher than those in the Act on Physical Protection and Radiological Emergency (APPRE) for all food categories, while for adults, the derived activity concentrations for drinking water and milk appeared to be slightly lower. The derived activity concentrations for vegetables, fruits, and grains were greater than those in the guidelines of the APPRE, while the derived activity concentrations for meat and seafood were similar to those in the APPRE. The derived activity concentrations for radioiodine were greater than both domestic and global standards. The calculated operational intervention levels (OILs) based on domestic food intake rates were greater than the IAEA's default OIL6 values for most radionuclides, except for a few ${\alpha}$-radionuclides. Conclusion: The current domestic guidelines turned out to be conservative overall, compared to the present results that were calculated using domestic food intake rates. It is recommended that the domestic guidelines should be revised and complemented transparently through an in-depth review by stakeholders on a solid scientific basis.

• Fire Protection Technology
• /
• s.19
• /
• pp.17-21
• /
• 1995

This is to study installation standards of aspirating devices and detectors, which are components of ADS(aspirating fire detection system). The BFPSA(British Fire Protection System Association) code was mainly referred is studying. ADS aspirated air and smoke through the pipe and then checks if there is fire or not. It is now in the limelight because it can early alarm in case of fire and prevent false-alarming.

• Journal of the Korean Institute of Gas
• /
• v.24 no.4
• /
• pp.48-55
• /
• 2020

The installation of lightning protection system has recently been increasing, but the amount of damage has still been increasing. In this study, survey (interview) and field conditions were conducted to identify the installation and safety standards of the lightning protection system. it was analyzed that the safety management system is non-existent at the stage of the design, manufacturing and construction of the site lightning protection system, and that the safety inspection of the lightning protection facility is not properly managed. It has been shown that lightning protection systems, that can solve these problems, need to be re-established according to the reality so that safety inspection can be carried out in accordance with safety standards such as management of safety certification products, operation of survey institutions, design, manufacturing, and construction of safety standards at a national level.

• Journal of Radiation Protection and Research
• /
• v.41 no.4
• /
• pp.409-417
• /
• 2016

Background: Airborne radioactive particulate in many important nuclear facilities (particularly nuclear power plants) will have a strong impact on the relative public dose if they are released into the corresponding environment traversing the stack or vents. The radiation protection researchers have regarded the relative environment assessing and estimation of public doses. And the model of assessing impact of discharges radioactive substance to the environment have been recommended by many international organizations (e.g. IAEA) with the nuclear energy safety and radiation protection. Materials and Methods: This paper introduced the generic models that were suggested by International Atomic Energy Agency (IAEA), for use in assessing the impact of discharges of radioactive substances to the environment (e.g. IAEA Safety Report Series No.19). Results and Discussion: The writers of this paper, based on the recommend methods, assessed the discharge limits in some airborne radioactive substances discharging standards. The reasons that IAEA method are introduced are mainly the following considerations: IAEA is one of international organizations with some authorities in the nuclear energy safety and radiation protection; and, more important, the recommend modes are operational methods rather than the methods having little operations such as that have used by some researchers. Conclusion: It is wish that the introduced methods in this paper can be referenced in draft or revise of the standards related to discharges of radioactive substances to the environment.

• Fire Science and Engineering
• /
• v.33 no.4
• /
• pp.105-111
• /
• 2019

In South Korea, smoke control systems are designed according to the fire safety standards NFSC501 and NFSC 501A. However, there is a problem in that the design values are incompatible when measuring the performance of the system after the design construction for calculating the leakage crack area described in the standards. Therefore, we compared the standards for smoke control systems from South Korea, Japan, and the United Kingdom. In South Korea, designs are conducted uniformly according to the NFSC 501A Manual, but in Japan and the United Kingdom, designs consider smoke temperature, duct loss, and fire floor air supply. Furthermore, they use larger values than in South Korea.

• 대한방사선방어학회:학술대회논문집
• /
• 2011.04a
• /
• pp.44-45
• /
• 2011

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.6 no.5
• /
• pp.70-78
• /
• 2003

From the viewpoint of the importance of the division theory based on topography(pyungsu) derived from the uniqueness in topography, not to mention of the function of ridge in ruban areas, the destroy of ridges should be prevented from the development of hill areas. This study intends to propose the basic concepts and principles to protect the ridge axis with green in open space and landscape planning. The main results are summarized as follows : First, eco-bridge across the ridges will be connected for the purpose of ecosystem restoration. Second, the protection and restoration of green ridge axis can be completed by Green Structure Plan which has principles and standards such as. - layout of development axis and establishment of rules on preservation - the practical use of various preservation methods and the standards suitable to the methods - laying down the standards of restoration according to the height from ground level - the application of zoning such as height district and urban design for preservation Finally, the design of implementation tools must be needed for protection and restoration.

• Transactions of the Korean hydrogen and new energy society
• /
• v.21 no.3
• /
• pp.167-183
• /
• 2010

This paper analyzes the backgrounds of the standards for protection against electric shock in Global Technical Regulations (GTR) of Fuel Cell Vehicle (FCV). Targets on research were high voltage criteria, safety current, isolation and grounding resistance, time limitation, energy, adequate clearance, and test procedure. Based on human impedance and effect of current in IEC 60479-1, safety of human was examined. Then, isolation and grounding circuit model of FCV were analyzed theoretically. The results give several suggestions: touch voltage less than 25V, AC energy less than 0.0813J, separation considering middle finger length, grounding resistance less than $0.2\Omega$, maximum AC ground voltage of 1V (rms), and isolation resistance between earth and electrical chassis. In MATLAB/Simulink environment, error characteristics of isolation resistance measurement procedure using internal DC sources were analyzed under variations of internal resistance of voltmeter and isolation resistance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.277-280
• /
• 2005

This paper dealt with the development of a surge protection device (SPD) that can protect high speed computer network devices from overvoltages caused by switching operations or lightning surges. The designed SPD is a form of hybrid circuit which is composed of a gas tube having large current diverting capability, high response bi-directional avalanche diodes, and fast recovery diodes to reduce insertion loss on high frequency domain. Surge protection and signal transmission characteristics of the fabricated SPD was tested according to the international standards, IEC 61000-4-5 and IEC 61643-21. From the test results, the SPD is satisfied with the international standards and the high cut-off frequency was 204MHz. Also, the SPD showed a good performance without an insertion loss on a field test of 100Mbps class Local Area Network