• 대한심미치과학회지
• /
• 제23권1호
• /
• pp.34-40
• /
• 2014

부분 무치악을 수복하는 데 있어서 선택할 수 있는 치료의 옵션으로는 전통적인 국소의치와 임플란트 지지-고정성 보철물 등이 있다. 하지만, 환자의 전신적 또는 구강의 상태(수술적인 술식이 제한되는 전신병력, 지지조직의 부족 그리고 골유착에 실패한 임플란트)와 치료비용에 대한 허용 정도에 따라 모든 옵션이 항상 가능한 것은 아니다. 가철성 국소의치는 임플란트 고정성 보철물에 비해 구강위생 관리 및 상,하악 악간관계의 부조화를 수정하기에 편리한 장점이 있다. 최근에는 전략적 위치에 임플란트를 식립하여 기존 악궁 형태에서는 제한되는 국소의치 디자인의 한계를 개선할 수 있는 임플란트지지형 RPD(Implant Supported Removable Partial Denture)가 새로운 방안으로 대두되고 있다. ISRPD는 전략적 위치에 임플란트를 식립하여 역학적인 한계를 극복할 수 있을 뿐 만 아니라 전악의 임플란트지지형 고정성 보철이 제한되는 환자에서 보다 경제적이고 현실적인 보철적 해결책이 될 수 있다. 따라서, RPD를 이용한 보철계획 수립시 전략적 위치에서의 임플란트의 사용은 고전적인 가철성 국소 의치에서보다 유지력과 안정성을 증진시키고 구강위생관리 또한 용이하여 환자의 적응도를 높이는 방안으로 고려될 수 있다. 본 증례는 상악 양측 구치부의 임플란트 고정성 보철,하악의 bar-type overdenture를 사용중이던 59세 남성환자에서 상악 #15i임플란트의 abutment screw fracture와 임플란트의 골유착 실패로 인한 다수 임플란트를 발거 후 남은 #15i,24i,25,26,i의 잔존 임플란트와 #23 자연치를 활용해 상악에 ISRPD를 적용한 경우이다. #23 surveyed crown, #24i=25i=26i surveyed bridge 및 #15i에 gold coping을 제작하여 국소의치의 지지와 유지,안정을 도모하였다.최종 보철물을 장착하고 2년간 주기적인 follow up 통해 예후를 관찰중이며 지대치로 사용한 임플란트에서 screw loosening이나 파절, 골흡수 등의 증상은 현재까지 관찰되지 않았다.

• 대한치과보철학회지
• /
• 제46권4호
• /
• pp.381-395
• /
• 2008

서론: 임플랜트와 자연치가 혼재하는 증례에 있어서 보철물의 연결여부와 그 결과에 대해 논쟁이 많이 있어왔다. 본 연구에서는 임플랜트와 자연치를 이중관으로 연결했을 경우에 치조골 내에서 임플랜트 주변 조직의 하중에 대한 응력의 양상을 분석하여 자연 치와 임플랜트를 연결하는 보철물의 방식으로 이중관의 사용가능성을 비교 분석하고자 하였다. 연구재료 및 방법: 실험군으로서는 한 개의 자연치아와 한 개의 임플랜트를 이중관으로 연결한 모델을 사용하고, 대조군으로 두 개의 임플랜트를 이중관으로 연결한 모델을 사용하여 응력분포의 차이를 비교분석하였다. 임플랜트와 자연치 각각 통상적인 금합금을 사용하여 내,외관을 모델링한 후 각각의 외관을 연결한 구조를 형성한다. 내관과 외관은 $6^{\circ}$의 경사도 (taper)로 형성하고 내외관 사이의 공간을 인정하여, 하중을 가했을 경우 내외관 사이에 합금의 마찰력과 변위를 계산하여, 그 결과가 골내 임플랜트의 응력 분포에 영향을 줄 수 있도록 실험모델을 형성하였다. 하중은 일반적인 저작력의 크기로 임플랜트 부위와 자연치 부위에 각각 부여하여 응력의 차이를 비교하였으며, 최종적으로 대조군과의 차이를 비교하고자 하였다. 하중 조건은 임플랜트와 자연치아 사이, 임플랜트 후방, 전방부 자연치아의 사이에 하중을 가하였으며, Load case 1, 2, 3로 분류하였다. 실험을 위해서 ANSYS Version 8.1을 사용하여 3차원 유한 요소 분석을 시행하였다. 연구성적: 지대주에 가해지는 응력 - 최대 응력은 실험군이 대조군에 비해 각각 2.4 (Load Case1), 1.02 (Load Case2), 0.46 (Load Case3)배 높게 나타났으며,Load Case3의 경우 대조군의 최대응력이 더욱 높게 나타났는데, 이것은 전치부 치아의 경우 하중을 효과적으로 분산하기 때문인 것으로 보인다. 악골내에 가해지는 응력 - 악골내에서 최대 응력은 실험군이 대조군에 비해 각각 1.69 (Load Case1), 1.26 (Load Case2), 1.93 (Load Case3) 배 크게 나타났다 결론: 임플랜트와 자연치아가 혼재된 경우, 이중관으로 상부 보철물을 연결한 경우, 임플랜트만으로 구성된 대조군에 비해, 임플랜트 및 임플랜트 식립 부위의 악골에 가해지는 최대 응력은 1.02 에서 2.4배 가량 높게 나타났다. 자연치아의 움직임이 임플랜트의 경부 및 악골 내에 응력을 집중시킨 것으로 보이며, 자연치아가 있는 악골부위에서는 응력이 거의 발생하지 않았다. 본 실험의 경우 자연치아와 임플랜트에서 모든 하중을 받는 것으로 계산하였고, 실제 가철성 의치에서 나타나는 점막의 영향을 배제하였기 때문에, 실제 임상에서는 후방 임플랜트에 미치는 최대 응력의 크기는 2.4배 이하일 것으로 추정할 수 있다. 앞으로, 실제 임상에 적용하였을 경우, 임플랜트에 미치는 영향 및 자연치아에 미치는 결과에 대한 연구가 필요할 것이다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제42권6호
• /
• pp.352-357
• /
• 2016

Objectives: This study aimed to evaluate the stability of prosthetic screws from three types of craniofacial prostheses retention systems (bar-clip, ball/O-ring, and magnet) when submitted to mechanical cycling. Materials and Methods: Twelve models of acrylic resin were used with implants placed 20 mm from each other and separated into three groups: (1) bar-clip (Sistema INP, São Paulo, Brazil), (2) ball/O-ring (Sistema INP), and (3) magnet (Metalmag, São Paulo, Brazil), with four samples in each group. Each sample underwent a mechanical cycling removal and insertion test (f=0.5 Hz) to determine the torque and the detorque values of the retention screws. A servo-hydraulic MTS machine (810-Flextest 40; MTS Systems, Eden Prairie, MN, USA) was used to perform the cycling with 2.5 mm and a displacement of 10 mm/s. The screws of the retention systems received an initial torque of 30 Ncm and the torque values required for loosening the screw values were obtained in three cycles (1,080, 2,160, and 3,240). The screws were retorqued to 30 Ncm before each new cycle. Results: The sample was composed of 24 screws grouped as follows: bar-clip (n=8), ball/O-ring (n=8), and magnet (n=8). There were significant differences between the groups, with greater detorque values observed in the ball/O-ring group when compared to the bar-clip and magnet groups for the first cycle. However, the detorque value was greater in the bar-clip group for the second cycle. Conclusion: The results of this study indicate that all prosthetic screws will loosen slightly after an initial tightening torque, also the bar-clip retention system demonstrated greater loosening of the screws when compared with ball/O-ring and magnet retention systems.

• 대한치과보철학회지
• /
• 제36권3호
• /
• pp.468-482
• /
• 1998

Since the concept of osseointegration was introduced by Branemark of Sweden, dental implants have been used for various dental prosthetic treatments. The survival rate of dental implant is likely to be closely related to the total biomechanical role of each component of implant system. The use of interchangeable component is very attractive for dental practitioners because such an approach would save treatment cost, flexibility of prosthetic treatment options as well as conveniences. Therefore, the use of interchangeable implant system has been increasing without scientific assessment of safety and efficacy of various interchangeable implant system. The purpose of this study, therefore, were to compare the geometric characteristic of four interchangeable dental implant screws and the loosening torque of these screws. Four types of dental implant screws tested in this study were Nobelpharma, 3i, Impla-med, Restore. Four screws each of the test specimens were subjected for scanning electron microscopic examinations under the same condition and a 35x magnified standard SEM picture was objected from each test specimen using JSM-5200 scanning microscope. From each of the SEM pictures, eight parameters. i.e., diameter of screw head. screw length, thread pitch, major diameter. neck diameter, neck length, crest width and root width were determined using a caliper. The measurement for each parameters were then corrected for their magnification factor. The loosening torque were also determined by using a torque gauge. All of the measurements were statistically analyzed by ANOVA test and multiple range test. Statistical significance was set in advance at the probability level of less than 0.05. All analyses were done with SPSS software for the personal computer. The conclusion obtained from this studies were summarized as the following; 1. No statistically significances were noted in the thread pitch. and crest width in the four screws, and in the case of major diameter, the Impla-med screw was significantly smaller than the other three screws (p<0.05). Therefore, four implant bolts could be physically inserted in a abutment nuts. 2. The diameter of screw head was decreased in the order of Restore, 3i, Nobelpharma, Impla-med screws and the length of screws were decreased in the order of 3i, Restore, Nobelpharma and Impla-med. The diameter of neck was decreased in the order of Impla-med, Restore. Nobelpharma, 3i screws. The differences of each of these parameters were statistically significant (p<0.05). The width of root of screws were decreased in the order of Nobelpharma, Impla-med, Restore and 3i. The differences among Nobelpharma and Impla-med. Restore and 3i were statistically significant (p<0.05). 3. When the screws were loosening 1, 3, 4 and 5 times, the loosening torque for Impla-med and 3i screws were significantly higher than that of Nobelpharma or Restore screws (p<0.05). However, when statistically smaller than that of 3i, Restore or Nobelpharma screws(p<0.05).

• 대한치과보철학회지
• /
• 제57권4호
• /
• pp.448-455
• /
• 2019

법랑모세포종은 치성 상피성 양성 종양으로 재발률이 높아 주변 조직의 광범위한 절제 및 결손부의 재건을 필요로 한다. 술 후 치아 결손 부위의 보철치료 시에 재건 부위의 해부학적 한계로 인해 임플란트 식립을 동반한 보철 치료가 추천된다. 본 증례에서는 법랑모세포종으로 인해 하악골 분절 절제술 및 장골을 이용한 하악골 재건술을 시행한 환자에서 재건 부위 상실치를 임플란트 고정성 보철물로 수복하였고 임플란트 보철물을 장착 완료 한 14개월 뒤 원인 미상의 인접치 정출로 인해 임플란트를 포함한 전방부 치아에서 1 mm 가량의 개방 교합이 발생하였다. 성인에서 상악 전치부 임플란트 식립 후 잔존 성장으로 인해 임플란트 저위 교합이 발생하는 경우는 보고된 바 있으나 본 증례는 구치부에서 인접한 자연치의 정출로 인해 임플란트 보철물을 포함한 전방 치열의 개방 교합이 발생한 것으로 그 유사 보고가 흔하지 않다. 이에 정출된 치아를 압하 하는 교정 치료를 동반한 전체 치료 과정을 보고하고 원인 미상의 자연치 정출이 발생한 원인에 대해 고찰해보고자 한다.

• Journal of Oral Medicine and Pain
• /
• 제42권4호
• /
• pp.102-108
• /
• 2017

Purpose: Many metal ions released from dental casting alloys have been reported to influence the intraoral symptoms of oral lichen planus (OLP) and burning mouth syndrome (BMS). The aim of this study was to investigate the relationship between salivary metal ion levels and the prosthetic duration as well as to evaluate the time-dependent morbid effects of metal ions in OLP and BMS patients. Methods: Three study groups consist of the following subjects respectively: 17 OLP patients, 12 BMS patients, and 12 patients without oral symptoms. The salivary concentrations of 13 metal ions (copper, cobalt, zinc, chromium, nickel, aluminum, silver, iron, titanium [Ti], platinum, tin, palladium, and gold) were measured by Laser Ablation Microprobe Inductively coupled Plasma Mass Spectrometry. Results: The Ti ions had statistically significant differences among the groups with a prosthetic duration of less than 5 years. There were no significant differences between all ion levels among the groups wearing dental cast alloys for over 5 years. In the BMS group, the level of Ti ions in patients with prosthetic restorations less than 5 years old were significantly high (p<0.05). Conclusions: In the BMS group, 3-60 months during which salivary Ti levels were higher were matched with the duration of burning symptoms ($15.6{\pm}17.1months$). Furthermore, Ti ions were statistically high in the oral cavity of BMS patients fitted with dental casting alloys for 5 years. These results suggest that Ti ions released from dental implants and oral prostheses could attribute to burning sensation of BMS.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제40권4호
• /
• pp.188-194
• /
• 2014

For large membrane perforations that develop during sinus-bone grafting, we performed repairs using a pedicled buccal fat pad and a resorbable collagen membrane simultaneously with the bone graft. This study included eight patients. Postoperative maxillary sinusitis developed in two patients, which we managed with incision and drainage, and antibiotics. Ultimately, six patients received 12 implants, three of which failed (75% success). Implant replacement was performed after the removal of the failed replacement, at which point the prosthetic treatment was considered complete. In all of the six cases that we were able to follow-up with, the sinus-bone graft was healing favorably. We observed that the sinus bone height decreased gradually with time. Based on these case series, we conclude that our procedure of repairing large sinus-membrane perforations with a pedicled buccal fat pad and a collagen membrane is a reliable technique.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제33권6호
• /
• pp.648-653
• /
• 2007

This case study investigated the clinical effect of guided bone regeneration(GBR) using $Regenaform^{(R)}\;and\;Ossix^{(R)}$ membrane and the histology of the new bone that formed just under the membranes. $Regenaform^{(R)}$ transplantation and covering with $Ossix^{(R)}$ membrane were performed to repair bone defects around implants after implantation in three patients. After $3{\sim}4$ months, the membranes were removed in a second operation, and a biopsy was taken under the membrane. The biopsies showed a bone density of $23{\sim}42%$, and subsequent prosthetic treatments were successful in all cases.

• 한국임상수의학회지
• /
• 제39권6호
• /
• pp.390-394
• /
• 2022

A 6-year-old, 36.5 kg castrated male Golden Retriever presented for revision surgery for left total hip replacement. The patient underwent removal of the cup and head implants due to unmanageable prosthetic hip dislocation, despite revision surgery. On physical examination, the dog showed persistent weight-bearing lameness after exercise of the left hindlimb with mild muscle atrophy. Radiographic examination revealed dorsolateral displacement of the femur with a remnant stem and bony proliferation around the cranial and caudal acetabulum rims. The surgical plan was to apply the dual mobility cup to increase the range of motion and jump distance to correct soft tissue elongation and laxity caused by a prolonged period of craniodorsal dislocation of the femur. The preparation of the acetabulum for cup fixation was performed with a 29-mm reamer, and the 29.5-mm outer shell was fixed with five 2.4-mm cortical screws. The head and medium neck of the dual-mobility system were placed on the cup, and the hip joint was reduced between the neck and stem. The dog exhibited slight weight bearing on a controlled leash walk the day after surgery. The patient was discharged 2 weeks postoperatively without any complications. Six months postoperatively, osseointegration and a well-positioned cup implant were observed, and the dog showed excellent limb function without hip dislocation until 18 months of phone call follow-up.

• 대한치과보철학회지
• /
• 제39권1호
• /
• pp.25-36
• /
• 2001

Among the numerous factors contributing to implant failure, the most common are infection, failure of proper healing and overload. These factors may occur combined. Implant fractures are one of the complications resulting from overload. Implant fracture is not a common feature, but once it occurs it causes very unpleasant circumstances for the patient as well as for the practitioner. Only few studies have been reported regarding this subject. Thus, little is known about its solutions. It is important that analyzing reasons for implant fracture and finding appropriate solutions. Factors leading to implant fracture are design, material defects, nonpassive fit of prosthetic framework and biomechanical overload. Previous studies have reported that implant fractures ares associated with marginal bone loss and occur mostly in the posterior regions and that most patients showing parafunctional habits also have implant fracture. Abutment and gold screw loosening or fracture were also observed in some of the cases previous to implant fracture. Similar observations were seen in our hospital as well. The following cases will present implant fracture cases which have been successfully treated regarding function and biomechanics. This was achieved by means of using increased number of futures, increasing fixture diameter and establishing proper occlusion.