• The Journal of Advanced Prosthodontics
• /
• 제8권4호
• /
• pp.329-332
• /
• 2016

Fabricating a surveyed prosthesis beneath an existing partial removable dental prosthesis (PRDP) is a challenging and time-consuming procedure. The computer-aided design/computer-assisted manufacturing (CAD/CAM) technology was applied to fabricate a retrofitted, surveyed zirconia prosthesis to an existing PRDP. CAD/CAM technology enabled precise and easy replication of the contour of the planned surveyed crown on the existing abutment tooth. This technology ensured excellent adaptation and fit of newly fabricated crown to the existing PRDP with minimal adjustments. In this case report, a seventy-year-old male patient presented with fractured existing surveyed crown. Because the existing PRDP was serviceable, new crown was fabricated to the existing PRDP.

• Clinics in Shoulder and Elbow
• /
• 제20권3호
• /
• pp.172-179
• /
• 2017

Indications of reverse total shoulder arthroplasty (RTSA) have been consistently extended by technical advancements in reverse arthroplasty prosthesis, continuous development of the implants, accumulated experiences and its successful treatment outcomes; accordingly, its use has rapidly increased. RTSA has been performed for a variety of indications, with variable outcomes depending on the initial diagnosis. However, controversial opinions still exist regarding the design of reverse arthroplasty prosthesis (medialized or lateralized design and the neck-shaft angle of the humeral prosthesis), suture of the subscapularis tendon, use of cement during placement of the humeral prosthesis, and surgical procedures; therefore, these should be investigated so that they can be better understood.

• The Journal of Advanced Prosthodontics
• /
• 제10권6호
• /
• pp.430-439
• /
• 2018

The treatment of craniofacial anomalies has been challenging as a result of technological shortcomings that could not provide a consistent protocol to perfectly restore patient-specific anatomy. In the past, wax-up and impression-based maneuvers were implemented to achieve this clinical end. However, with the advent of computer-aided design and computer-aided manufacturing (CAD/CAM) technology, a rapid and cost-effective workflow in prosthetic rehabilitation has taken the place of the outdated procedures. Because the use of implants is so profound in different facets of restorative dentistry, their placement for craniofacial prosthesis retention has also been widely popular and advantageous in a variety of clinical settings. This review aims to effectively describe the well-rounded and interdisciplinary practice of craniofacial prosthesis fabrication and retention by outlining fabrication, osseointegrated implant placement for prosthesis retention, a myriad of clinical examples in the craniofacial complex, and a glimpse of the future of bioengineering principles to restore bioactivity and physiology to the previously defected tissue.

• 대한심미치과학회지
• /
• 제26권1호
• /
• pp.52-63
• /
• 2017

상하악 풀마우스 보철을 만들어주어야 할때 정확한 진단을 하고 계획을 잘 세워서 보철물을 디자인해야 한다. 특히 교합고경이 무너지고 잘못된 교합평면으로 인한 환자의 경우에는 예전의 교합고경으로 회복시켜주어야 하고 올바른 교합평면을 만들어 주어야 한다. 또한 적절한 재료를 사용하여 환자가 음식을 잘 저작하고 무리한 힘이 가해지지 않도록 해야한다. 임플란트의 위치가 부적절한 위치에 있을때는 보철물을 디자인할때 대합치와의 관계와 교합등을 고려하여 결정한다. 그리고 임플란트 주변의 청소성을 위한 디자인을 해주어야 한다.

• 대한치과기공학회지
• /
• 제43권4호
• /
• pp.202-209
• /
• 2021

By classifying temporary denture production for surgical guides, digital guide-based surgery, and final prosthesis production, the problems of each process were assessed in advance and the factors that could be improved were confirmed in this study. The manufacturing process of fusion dental prosthesis uses virtual programs and computed tomography images to manufacture devices using the latest technologies of computer-aided design/computer-aided manufacturing and three-dimensional printing, which enables implants to be placed in the desired location in advance. Moreover, implant placement is not dependent on the skill and condition of the dentist, and because it uses a computer system, it can always be performed at a constant and optimal position. This can reduce the remanufacturing rate compared with the general method, shorten the treatment period, and eliminate patient discomfort. Unlike the traditional method of using impression materials and plaster models, digital fusion dental prostheses would be evaluated as a technology for producing prosthesis through professional design technology and communication.

• 대한치과보철학회지
• /
• 제14권1호
• /
• pp.66-71
• /
• 1976

The purpose of this investigation was to evaluate the mouth preparation and design of removable partial dentures. A total of 187cases for the prefabricated partial denture frameworks in both maxillary and mandibular semi-dentulous situations (66 cases and 203 cases) was selected from this study. The evaluations of mouth preparation and design observed here involved the classification of edentulous spaces, status of abutment splinting with location, design of direct retainer and structure of maxillary major connector according to the incidence of both dental arches, ages, sexes and segment of semidentulousness. The analyzed results were as follows: 1) The order of frequency rate in removable partial denture construction was Class II (50.27%), Class I (36. 90%), Class III (10.69%), and Class IV (2.14 %). 2) The distribution on design of maxillary removable partial denture prosthesis was 33.22% and 64.11% in mandibular removable partial denture prosthesis. 3) The age distribution of removable partial denture prosthesis was prominent after40 years (41.71%). 4) The design pattern of maxillary major connectors was in order of anteroposterior bar, single palatal bar, palatal strap, U-shape connector. 5) The design pattern of direct retainer was in order of Aker's clasp, I-bar clasp, backaction clasp, cuspid universal clasp. 6) The abutment for partial denture clasp splinted between premolar and premolar and its frequency rate revealed 53.44%. 7) It seemed that the location and design of the indirect retainer showed accepatble limit.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.267-271
• /
• 1997

In this study, swing phase dynamic simulation of above-knee prosthesis is performed. The prosthesis consists of a single axis knee mechanism and pneumatic cylinder. The numerical modelling of the prosthesis is analyzed in two dimensions. The governing equation of thermodynamical pneumatic cylinder model is applied to construct the control of lower limb during swing phase. Knee flexion angle with respect to the orifice diameter of the pneumatic cylinder is produced. This analysis will be very useful to the design of pneumatic cylinder in prosthesis.

• 대한심미치과학회지
• /
• 제23권2호
• /
• pp.70-76
• /
• 2014

After extraction of tooth, alveolar ridge resorption is inevitable in most cases. Clinicians confront with horizontal and vertical resorption of alveolar bone. Without massive amount of bone and soft tissue graft, dental implant will be placed apically to gain stability. In those cases, not only white esthetic part, but also pink esthetic part should be restored with pink porcelain. The margin of prosthesis should be located apically to reproduce natural look with adjacent teeth. However, when the margin is located apically, it is always hard to remove remaining cement, thus complications may arise. In this report, a novel design of implant prosthesis is introduced to solve those issues. The novel design is consisted of zirconia framework with pink porcelain and separate crowns on top of the framework. It eliminates the possibility of cement remnants by bringing the crown margin coronally. Pink esthetic part is incorporated in abutment part instead of crown part and the screw hole is covered with separate crowns.

• 대한치과보철학회지
• /
• 제59권4호
• /
• pp.497-507
• /
• 2021

무치악 환자에서 잔존 치조골을 최대의 효율로 활용해 임플란트 고정성 보철물을 수복하는 치료법 중 하나로 All-on-6 개념을 사용할 수 있으나, 치료과정에서 복잡함과 번거로움이 동반된다. 나날이 발전해 온 디지털 시스템을 활용한다면 무치악 환자의 임플란트 식립부터 보철물 제작 및 수복까지 높은 효용성으로 활용할 수 있다. 본 증례에서는 76세 상악 무치악 환자의 일체형 나사 유지형 고정성 임플란트 보철 수복(1-piece design, screw retained implant fixed prosthesis)에 대해 진단부터 임플란트 식립 그리고 보철물 제작까지 전 과정에서 디지털 시스템을 활용하였다. 술전 진단에서 구강직접스캔(Direct intraoral scan)을 통해 환자의 정보를 데이터화 하였으며 이를 토대로 임플란트 식립 수술 가이드와 식립직후 장착할 즉시 임시보철물을 디자인 하였다. 최적의 잔존 치조골 위치에 식립된 6개의 임플란트 위치정보에 따라 정밀하게 제작된 즉시 임시보철물을 수복하여 술 후 사용 가능하도록 하여 환자의 불편감을 최소화하였다. 디지털 시스템을 활용하여 환자의 요구사항, 안정된 수직고경과 교합, 심미성을 고려하여 제작한 새로운 임시보철물을 거쳐 최종보철물을 디자인하고 제작하였다. 디지털 시스템을 활용하여 무치악 환자의 효율적이고 정확한 임플란트 식립부터 보철물 제작까지 전 과정에 있어서 복잡한 임플란트 치료과정을 단순화하여 환자의 불편감을 최소화시키고 기능적이고 심미적인 결과를 얻어 보고하는 바이다.

• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 2002년도 아시아견관절학술대회
• /
• pp.177-179
• /
• 2002

Total elbow prostheses which are now available in clinical use can generally be classified into two major categories ; one bing linked prostheses, another being unlinked prostheses. Of those two categories I am dealing here only with the problems of the unlinked type prosthesis, particularly with those of non-constrained, surface-replacement prostheses. Furthermore, my presentations this time may have to be narrowed down only to the topics regrading the particular features and some of the technical problems with Kudo Elbow Prosthesis, due to the time limit assigned for this presentation.