• International Journal of Aeronautical and Space Sciences
• /
• 제9권1호
• /
• pp.85-99
• /
• 2008

The dynamic response analysis for large structures using finite element method requires a large amount of computational resources. This paper presents an efficient vibration analysis procedure by combining node-based substructuring reduction method with a response analysis scheme for structures with undamped, proportional or nonproportional damping. The iterative form of substructuring reduction scheme is derived to reduce the full eigenproblem and to calculate the dynamic responses. In calculating the time response, direct integration scheme is used because it can be applied directly to the reduced model. Especially for the non proportional damping matrix, the transformation matrices defined in the displacement space are used to reduce the system. The efficiency and the effectiveness of the present method are demonstrated through the numerical examples.

• 산업공학
• /
• 제19권4호
• /
• pp.316-323
• /
• 2006

In this study, based on Weibull proportional age reduction model and age replacement policy, we analyze economic life of cutting tool which allows re-grinding. Re-grinding task, usually for high-priced machining tools(e.g., broaching tool), is a kind of preventive maintenance activities to extend tool life at the completion of a lot production. The numerical results are also presented. Among the parameters of Weibull proportional age reduction model, the re-grinding effect parameter and Weibull shape parameter have a strong effect on economic tool life, and in the cost parameters, shortage cost is most sensitive. With further study on the parameter estimation of tool life process and cost function, this study can be expected to give more practical contribution to management of general machining tools.

• 대한방사선기술학회지:방사선기술과학
• /
• 제14권2호
• /
• pp.55-55
• /
• 1991

I reduced overexposed X-Ray film image with farmer reduction method and $KMnO_4$ reduction method. The results are as follows : 1. In farmer reduction method, there appears linear decreasing film image density. 2. In $KMnO_4$ reduction method, there appears over proportional reduction. 3. When red prussiate is compared with $KMnO_4$ reduction method, the latter shows more intense reduction. 4. If the reduction solution isn't used within 10 minutes after dilution, it becomes oxidized and the ability is decreased remarkably.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.113-118
• /
• 2007

In this paper, a new method is proposed for robust proportional- integral - derivative (PID) control that is to ensure specified phase margin and iso - damping property using reduction model. This method is based on the second order plus dead time(SOPDT) reduction model of the high order model. Reduction model used to ensure iso-damping property in the feature frequency. Simulation results gives proof of effectiveness of proposed method.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.64-69
• /
• 2004

The work presented here deals with controller design using error model constructed with proportional control ramp response. The design aims at the improvement of transient response, steady-state error reduction with stability preservation, generation of the consistent contour error through the proportional gain regulation of a mismatched system. The first step is to generate tracking-error curve with proportional control only and decide the added error signal shape on the error curve. The next is to construct a table for the steady-state loop gain with step input. The table is used for selecting the proportional gain. The effectiveness of the proposed controller is confirmed through the simulation and experiment.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.780-785
• /
• 2004

The work presented here deals with controller design by graphical method based on proportional control ramp response. The design aims at the improvement of transient response, disturbance rejection capability, steady-state error reduction with stability preservation. The first step is to generate tracking-error curve with proportional control only and decide the added error signal shape on the error curve. The effectiveness of the proposed controller is confirmed through the simulation and experiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전력기술부문
• /
• pp.9-11
• /
• 2006

This paper suggests a revision method for historical fault data using Proportional Aging Reduction(PAR) to consider maintenance effect in time-varying failure rate. In order to product time-varying failure rate, the historical fault data are necessary. However, the maintenance record could be left out in historical data by spot operator's mistake. In this case, the failure rate is produced less than the average failure rate for increasing equipments' life-time by maintenance effect. Hence, it is necessary for new time-varying failure rate to extract maintenance effect from the existing fault data. In this paper, the revision method to reduce equipments' life-time, adversely using PAR among three techniques to consider maintenance effect.

• Communications for Statistical Applications and Methods
• /
• 제13권1호
• /
• pp.49-60
• /
• 2006

There are six approaches to constructing standardized coefficient for logistic regression. The standardized coefficient based on Kruskal's information theory is known to be the best from a conceptual standpoint. In order to calculate this standardized coefficient, the coefficient of determination based on entropy loss is used among many kinds of coefficients of determination for logistic regression. In this paper, this standardized coefficient is obtained by using four kinds of coefficients of determination which have the most intuitively reasonable interpretation as a proportional reduction in error measure for logistic regression. These four kinds of the sixth standardized coefficient are compared with other kinds of standardized coefficients.

• 응용통계연구
• /
• 제34권6호
• /
• pp.957-968
• /
• 2021

역중도절단확률가중(inverse censoring probability weighting, ICPW)은 생존분석에서 흔히 사용되는 방법이다. 중도절단 회귀모형과 같은 ICPW 방법의 응용에 있어서 중도절단 확률의 정확한 추정은 핵심적인 요소라고 할 수 있다. 본 논문에서는 중도절단 확률의 추정이 ICPW 기반 중도절단 회귀모형의 성능에 어떠한 영향을 주는지 모의실험을 통하여 알아보았다. 모의실험에서는 Kaplan-Meier 추정량, Cox 비례위험(proportional hazard) 모형 추정량, 그리고 국소 Kaplan-Meier 추정량 세 가지를 비교하였다. 국소 KM 추정량에 대해서는 차원의 저주를 피하기 위해 공변량의 차원축소 방법을 추가적으로 적용하였다. 차원축소 방법으로는 흔히 사용되는 주성분분석(principal component analysis, PCA)과 절단역회귀(sliced inverse regression)방법을 고려하였다. 그 결과 Cox 비례위험 추정량이 평균 및 중위수 중도절단 회귀모형 모두에서 중도절단 확률을 추정하는 데 가장 좋은 성능을 보여주었다.

• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.543-549
• /
• 2000

Results of theoretical investigations of the stability characteristics of an actively controlled externally pressurized air journal bearing are presented. Proportional control and derivative control are used for the control algorithm of active air bearing. The stability characteristics of the actively controlled bearing operating at zero steady-state eccentricity is investigated with the step jump method. The speed at onset of instability is raised for both proportional control and derivative control of bearing. Proportional control increased the stability threshold without affecting the whirl ratio. But for derivative control of bearing, stability threshold increase is accompanied by a parallel reduction of the whirl ratio. Results show active control of bearing can be adopted for the stability improvement of air journal bearing.