• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권5호
• /
• pp.1728-1743
• /
• 2021

Three-dimensional (3D) video scenes are complex and difficult to control, especially when scene switching occurs. In this paper, we propose two algorithms based on an incremental proportional-integral-derivative (PID) algorithm and a similarity analysis between views to improve the method of bit allocation for multi-view high efficiency video coding (MV-HEVC). Firstly, an incremental PID algorithm is introduced to control the buffer "liquid level" to reduce the negative impact on the target bit allocation of the view layer and frame layer owing to the fluctuation of the buffer "liquid level". Then, using the image similarity between views is used to establish, a bit allocation calculation model for the multi-view video main viewpoint and non-main viewpoint is established. Then, a bit allocation calculation method based on hierarchical B frames is proposed. Experimental simulation results verify that the algorithm ensures a smooth transition of image quality while increasing the coding efficiency, and the PSNR increases by 0.03 to 0.82dB while not significantly increasing the calculation complexity.

• International Journal of Computer Science & Network Security
• /
• 제23권4호
• /
• pp.123-133
• /
• 2023

Active queue management (AQM) is a leading congestion control system, which can keep smaller queuing delay, less packet loss with better network utilization and throughput by intentionally dropping the packets at the intermediate hubs in TCP/IP (transmission control protocol/Internet protocol) networks. To accelerate the responsiveness of AQM framework, proportional-integral-differential (PID) controllers are utilized. In spite of its simplicity, it can effectively take care of a range of complex problems; however it is a lot complicated to track down optimal PID parameters with conventional procedures. A few new strategies have been grown as of late to adjust the PID controller parameters. Therefore, in this paper, we have developed a Squirrel search based PID controller to dynamically find its controller gain parameters for AQM. The controller gain parameters are decided based on minimizing the integrated-absolute error (IAE) in order to ensure less packet loss, high link utilization and a stable queue length in favor of TCP networks.

• 드라이브 ㆍ 컨트롤
• /
• 제18권4호
• /
• pp.52-58
• /
• 2021

The variable structure controller is designed such that in sliding mode, the system moves along the switching plane in the vicinity of the switching plane, thus it is robust because it is not affected by the parameter fluctuations of the plant. However, a controller based on a variable structure may not meet the desired performance when it is commanded to track any input or is exposed to disturbances. This study proposes a sliding mode controller that follows the IVSC (Integral Variable Structure Control) approach with ELO (Extended Luenberger observer) to solve this problem. The proposed sliding mode control is applied to the velocity control of the hydraulic motor. The sliding plane was determined by the pole placement, and the control input was designed to ensure the existence of the sliding mode. The feasibility of modeling and controller are reviewed by comparing with conventional proportional-integral control through computer simulation using MATLAB software and experimenting on the cases of significant plant parameter fluctuations and disturbances.

• 대한기계학회논문집
• /
• 제11권1호
• /
• pp.19-25
• /
• 1987

본 논문에서는 이와 같은 형식의 무인 반송차(이하무인차로 줄임)의 최적조향 제어를 연구하였다. 단순한 비예제어(proportional control, P-control)만으로는 정 상편차(steady state error)를 없앨 수 없으므로 본 연구에서는 최적 비예 및 적분제 어(PROPORTIONAL-PLUSINTEGRAL CONTROL, pi-CONTROL) 방식을 채택하였다. 간단하고 실현이 쉬운 부최적제어(Suboptimal Control)도 고찰하였으며 최적제어의 경우와 비교 검토하였다. 또 한 무인차의 주요 설계변수가 제어성능에 미치는 영향을 정량적으로 비교 검토하여 그 설정기준을 고찰하였다.

• 문화기술의 융합
• /
• 제9권6호
• /
• pp.957-966
• /
• 2023

본 논문에서는 새로운 실시간 적응형 PID 온도제어 기법을 제안한다. 제어대상을 표현하는 모델을 도입하여 오버슈트가 발생하지 않도록 하는 기법이다. 오버슈트의 원인이 되는 과도한 적분을 막기 위해 적분 제어량이 실시간으로 모델의 열손실을 추종하도록 적분 이득을 조정한다. 기본적으로 비례 제어는 오버슈트를 유발하지 않는다. PID 제어에서 오버슈트의 발생 원인은 적분에서 기인한다. 기존의 PID 제어는 적분이 비례 제어에 종속되고 개인이 상수로 고정되었다. 그 결과 서로에게 부정합되는 두 이득을 적용하면 과도한 오버슈트가 발생할 수 있었다. 그러나 제안하는 적응형 제어는 적분 제어량이 항상 열손실을 초과하지 않도록 능동적으로 오버슈트를 제거한다. 따라서 제안하는 기법에 따라 튜닝 실험이 필요 없는 적응형 PID 제어를 실현할 수 있다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권1호
• /
• pp.35-42
• /
• 2016

Developments in power electronics have enabled the widespread application of Pulse Width Modulation (PWM) inverters, notably for connecting renewable systems to the grid. This study demonstrates that a high-quality power can be achieved using a stand-alone inverter, whereby the comparison between the power quality of the stand-alone inverter with battery storage (off-grid) and the power quality of the utility network is presented. Multi-loop control techniques for a single phase stand-alone inverter are used. A capacitor current control is used to give active damping and enhance the transient and steady state inverter performance. A capacitor current control is cheaper than the inductor current control, where a small current sensing resistor is used. The output voltage control is used to improve the system performance and also control the output voltage. The inner control loop uses a proportional gain current controller and the outer loop is implemented using internal model control proportional-integral-derivative to ensure stability. The optimal controls are achieved by using the Sisotool tool in MATLAB/Simulink. The outcome of the control scheme of the numerical model of the stand-alone inverter has a smooth and good dynamic performance, but also a strong robustness to load variations. The numerical model of the stand-alone inverter and its power quality are presented, and the power quality is shown to meet the IEEE 519-2014. Furthermore, the power quality of the off-grid system is measured experimentally and compared with the grid power, showing power quality of off-grid system to be better than that of the utility network.

• 한국산학기술학회논문지
• /
• 제7권5호
• /
• pp.823-829
• /
• 2006

본 논문에서는 기존의 PID 제어기의 P 부분만을 퍼지 논리제어기로 대체한 퍼지 P+ID 제어기를 제안하였으며. 제안된 퍼지 P+ID 제어기는 단지 하나의 제어파라미터만을 추가하여 기존 PID 제어기를 조절하기 때문에 쉽게 설계 할 수 있으며, PID 제어기의 구조를 유지함으로서 기존 장치의 하드웨어 부분을 수정할 필요가 없다. 또한, 퍼지 P+ID 제어기는 기존 PID 제어기와 비교해서 충분한 안정성을 보여주며, 구조가 단순하고 계산 량이 적어 제어기의 동조시간을 기존의 퍼지 제어기에 비해서 많이 줄일 수 있는 장점이 있다. 제안된 Fuzzy P+ID 제어기를 BLDC 모터에 적용하여, 시뮬레이션 및 실험을 통하여 본 논문에서 제안한 제어기가 기존의 제어기보다 제어성능이 우수함을 확인하였다.

• KIEE International Transaction on Systems and Control
• /
• 제2D권2호
• /
• pp.78-91
• /
• 2002

In the thermal power plant, there are six manipulated variables: main steam flow, feedwater flow, fuel flow, air flow, spray flow, and gas recirculation flow. There are five controlled variables: generator output, main steam pressure, main steam temperature, exhaust gas density, and reheater steam temperature. Therefore, the thermal power plant control system is a multinput and output system. In the control system, the main steam temperature is typically regulated by the fuel flow rate and the spray flow rate, and the reheater steam temperature is regulated by the gas recirculation flow rate. However, strict control of the steam temperature must be maintained to avoid thermal stress. Maintaining the steam temperature can be difficult due to heating value variation to the fuel source, time delay changes in the main steam temperature versus changes in fuel flow rate, difficulty of control of the main steam temperature control and the reheater steam temperature control system owing to the dynamic response characteristics of changes in steam temperature and the reheater steam temperature, and the fluctuation of inner fluid water and steam flow rates during the load-following operation. Up to the present time, the Proportional-Integral-Derivative Controller has been used to operate this system. However, it is very difficult to achieve an optimal PID gain with no experience, since the gain of the PID controller has to be manually tuned by trial and error. This paper focuses on the characteristic comparison of the PID controller and the modified 2-DOF PID Controller (Two-Degrees-Freedom Proportional-Integral-Derivative) on the DCS (Distributed Control System). The method is to design an optimal controller that can be operated on the thermal generating plant in Seoul, Korea. The modified 2-DOF PID controller is designed to enable parameters to fit into the thermal plant during disturbances. To attain an optimal control method, transfer function and operating data from start-up, running, and stop procedures of the thermal plant have been acquired. Through this research, the stable range of a 2-DOF parameter for only this system could be found for the start-up procedure and this parameter could be used for the tuning problem. Also, this paper addressed whether an intelligent tuning method based on immune network algorithms can be used effectively in tuning these controllers.

• 대한토목학회논문집
• /
• 제30권4A호
• /
• pp.337-342
• /
• 2010

일반적으로 하천 시설에 사용되는 수문은 기계식 및 유압식, 혼합식 권양기에 의하여 개폐되며, 구조물의 크기 및 구조상 2개 이상의 인양장치로 동조를 이루며 안전하게 개폐되어야 한다. 수문의 개폐 시 설계상 정확히 고려할 수 없는 수압 및 마찰로 인하여 구조물에 추가적인 하중이 발생하게 된다. 이러한 추가적인 하중은 수문의 끼임 현상 및 권양기의 과부하 등을 초래하고, 이는 수문의 안전에 중대한 영향을 미치게 된다. 본 논문에서는 이러한 수문의 개폐 시 발생하는 불안전한 요소에 대응하여 권양기가 동조를 이룰 수 있도록 유압 및 변위를 동시에 고려한 FDC(Force-Displacement Control)시스템을 설계하였다. 설계된 FDC 시스템을 XG5000프로그램의 PID 기능을 이용하여 구현하였으며, 다중 유압 실린더 수문 권양기(winch) 모형을 제작하여 FDC 시스템을 실험적으로 검증하였다. 실험 결과 개발한 FDC 시스템은 수문의 개폐 시 발생하는 다양한 외부하중에 대응하여, 다중 유압 실린더로 이루어진 수문 권양기가 동조를 이루며 개폐됨을 확인하였다. 실험 결과로부터 FDC 시스템은 수문 권양기에 적용시 효과적임을 확인 하였다.

• International Journal of Control, Automation, and Systems
• /
• 제3권2호
• /
• pp.217-224
• /
• 2005

Generally, the underwater flight vehicle (UFV) depth control system operates with the following problems: it is a multi-input multi-output (MIMO) system because the UFV contains both pitch and depth angle variables as well as multiple control planes, it requires robustness because of the possibility that it may encounter uncertainties such as parameter variations and disturbances, it requires a continuous control input because the system that has reduced power consumption and acoustic noise is more practical, and further, it has the speed dependency of controller parameters because the control forces of control planes depend on the operating speed. To solve these problems, an adaptive fuzzy sliding mode controller (AFSMC), which is based on the decomposition method using expert knowledge in the UFV depth control and utilizes a fuzzy basis function expansion (FBFE) and a proportional integral augmented sliding signal, is proposed. To verify the performance of the AFSMC, UFV depth control is performed. Simulation results show that the AFSMC solves all problems experienced in the UFV depth control system online.