• Journal of the Korea Institute of Building Construction
• /
• v.12 no.5
• /
• pp.478-489
• /
• 2012

Each year, about four million tons of steel slag, a by-product produced during the manufacture of steel by refining pig iron in the converter furnace, is generated. It is difficult to recycle this steel slag as aggregate for concrete because the reaction with water and free-CaO in steel slag results in a volume expansion that leads to cracking. However, the steel slag used in this study is atomized using an air-jet method, which rapidly changes the melting substance at high temperature into a solid at a room temperature and prevents free-CaO from being generated in steel slag. This rapidly-cooled steel slag has a spherical shape and is even heavier than natural aggregate, making it suitable for the aggregate of radiation shielding concrete. This study deals with the radiation shielding property of concrete that uses the rapidly-cooled steel slag from the oxidizing process in the converter furnace as fine aggregate. It was shown that the radiation shielding performance of concrete mixed with rapidly-cooled steel slag is even more superior than that of ordinary concrete.

• Journal of Veterinary Clinics
• /
• v.24 no.2
• /
• pp.201-207
• /
• 2007

The teat cup liner compounds with improved physical property were developed using tri-polymer blend of natural rubber(NR), ethylene propylene diene monomer rubber(EPDM) and butyl rubber, and the changes of the physical properties of compounds were measured under various conditions such as standard, thermal, alkaline detergent and acid solutions aging conditions. The hardness of the new teat cup liner compound 1 was 50 and that of the compound 2 was 51 under standard condition. The tensile strength and elongation of the new compound 1 were $154kgf/cm^2$ and 675% under the standard condition, respectively. Also, those of the new compound 2 were 180 kgf/cm and 634% under the same condition. Their hardness were increased about $2{\sim}6%$ and the tensile strength and elongation were decreased about 10% under the $25^{\circ}C$ water and detergent solutions. Even though the new teat cup liner compounds exhibited so much decreased tensile properties under the $105^{\circ}C$ thermal aged condition, they sustained more stable aged physical properties including tensile strength and elongation than those of imported teat cup liner materials. Consequently, the new teat cup liner compounds would give prolonged lift cycle if they are used as a teat cup liner product.

• Journal of the Korean Society of Costume
• /
• v.66 no.6
• /
• pp.110-121
• /
• 2016

The purpose of this study is to develop high value-added uniform design in response to climate change, and produce high sensitivity uniforms that conserve the energy of its wearers. The scope of the study encompassed entire production stage from the product planning stage to developing a prototype to collecting consumer ratings to securing intellectual property. The results of the study are as follows. First, the material was developed that maximizes insulation by replicating human body heat radiation and raising the temperature by 5 degree Celsius. Second, through Time to Market system, a luxurious synthetic wool material was developed, and warm effect was achieved. Third, pattern design engineering for easy movement and design development allowed the realization of uniform design that is compatible indoors and outdoors as well as respond to highly active climate change. Fourth, Fifth, the developed design was registered and intellectual property rights were obtained.

• Transactions of Materials Processing
• /
• v.19 no.1
• /
• pp.25-31
• /
• 2010

To achieve desired microstructure and mechanical property of a manufacturing product, heat treatment process is applied as a secondary process after forging. Especially, quenching process is used for improving strength, hardness, and wear resistance since phase transformation occurs owing to rapid heat transfer from the surface of the specimen. In the present paper, a study on surface temperature measurement for water quenching of eutectoid steel was investigated. In order to determine the temperature history in experiments, three different measuring schemes were used by varying installation techniques of K-type thermocouples. Depending on the measured temperature distribution at the surface of the specimen, convective heat transfer coefficients were numerically determined as a function of temperature by the inverse finite element analysis considering the latent heat generation due to phase transformation. Based on the inversely determined convective heat transfer coefficient, temperature, phase, and hardness distributions in the specimen after water quenching were numerically predicted. By comparing the experimental and computational hardness distribution at three different locations in the specimen, the best temperature measuring scheme was determined. This work clearly demonstrates the effect of temperature measurement on the final mechanical property in terms of hardness distribution.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.8
• /
• pp.1472-1491
• /
• 2011

As used product transactions are currently on the rise, the demand for transactions of secondhand digital content will grow in the future; thus, learning to make secure transactions while avoiding cyber attacks becomes an important issue. In this paper, we combine the new buyer's secret key, the new buyer's watermark to embed in resold digital content, and the reseller's encrypted watermark, which can prove legal ownership of the reseller. Using the privacy homomorphism property of RSA and exponential calculus, the original seller of digital content can verify the legality of the reseller and the new buyer. We also reduced the load of encryption/decryption digital content using a partial encryption/decryption algorithm to make our protocol more efficient and practical. In the proposed protocol, the seller is not able to conduct piracy and easily frame any other innocent secondhand buyer when a case of piracy is found. In fact, piracy can be clearly traced using the privacy homomorphism property of RSA and the embedded watermark mechanism. Further, in the proposed protocol, the seller himself can trace the piracy using exponential calculus. Since it is unnecessary to trust third party participation, the conspiracy problem is resolved and the new buyer is not required to participate in the dispute. Moreover, the seller, reseller and new buyer can simultaneously benefit from the secondhand transaction.

• Journal of Digital Convergence
• /
• v.10 no.1
• /
• pp.357-364
• /
• 2012

For the resistance of the closed intellectual property license from the Free Software Movement. It's free and also can adapt have been widely used. Software for the resistance of the closed intellectual property rights have been promoted by the free software movement. Implementation of the proposed changes in the license that anyone can freely use the software and adapt open source software is widely used. The product of open source software can reduce development time and cost. Many people who use it will improve, verification and developed. However, indiscriminate use of these advantages, as well as the risk of dispute is high. This study is analyzed open source software dispute cases for piracy protection and will show duly open source software available to users by user environment.

• Journal of Korea Society of Industrial Information Systems
• /
• v.6 no.4
• /
• pp.68-74
• /
• 2001

This study presents the useful information for manufacturing industry-based development strategies at which Kangwondo province should aim, using the existing survey materials, interviews, and questionnaires. To analyze the technological competitive level of major eight enterprises in Kangwondo province, a synthetic evaluation has been conducted for areas such as new technology development, product development, production technology, and technological competitiveness. The study reveals that, among the technological competitiveness related factors, the managing status of business results, comparing analysis of business results, the applications of industrial property right, the registration of industrial property right, and the domestic and foreign certification show lower level than the other factors.

• Journal of Korea Technology Innovation Society
• /
• v.22 no.1
• /
• pp.28-49
• /
• 2019

This paper explores the characteristics of innovation activities in high growth firms that contribute to national and regional economic growth and job creation. The analysis is based on the 2016 KIS data to analyze the difference in innovation activities between high growth firms and general firms. The main results are as follows: First, high growth firms have a higher proportion of R&D personnel than general firms. Second, high growth firms are actively introducing product innovation, process innovation, and organizational innovation as compared to general firms. In the innovation activities related to product innovation and process innovation, there is no statistically significant difference between high growth companies and general companies except for external R&D. Third, High growth firms are more likely to cooperate with other technology partners than general firms. But, there is no statistically significant difference between high growth firms and general firms in the external knowledge search and the diversity of cooperating partners. Fourth, in terms of protecting innovation, high growth firms are more likely to use all kinds of innovation protection method, such as 'utilizing intellectual property rights', 'maintaining confidentiality', 'adopting complex design methods', 'market preemption ahead of competitors', and the most important means is the intellectual property rights. Fifth, government innovation policies that high growth firms chose as important are 'innovation subsidies and loans', 'acquirement, utilization and protection of intellectual property rights' and 'human resource support'.

• Carbon letters
• /
• v.14 no.1
• /
• pp.45-50
• /
• 2013

Polyacrylonitrile (PAN) copolymers of different molecular weights were synthesized by a suspension polymerization and precipitation polymerization method. The rheology behaviors of the synthesized PAN copolymers were investigated in relation to their molecular weight, solid content and melting temperature. The influence of "historical effects" on the spinning solution of PAN was studied by analyzing the laws of viscosity considering the diversification time and temperature. The viscosity disciplines of each spinning solution conformed well to the rheological universal laws in a comparison of the suspension polymerization product with that of precipitation polymerization. Viscosity changes in the swelling process of dissolution were gentler in the suspension polymerization product; a small amount of water will quickly debase the solution viscosity, and high-speed mixing can greatly shorten the time required by the spinning solution to reach the final viscosity.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.2
• /
• pp.239-248
• /
• 2019

This research presents an improvement of the physical and mechanical properties of composite board (com-ply) made of Oriented Strand Board (OSB) coated with wood veneer of Pine (Pinus merkusii), Avocado (Persea Americana) and Mahogany (Swietenia mahogany). 1.5 mm thick veneers of those three wood types were adhered to the surface of OSB using two adhesive types: epoxy and isocyanate. The adhesive with the glue spread of $250g\;m^{-2}$ applied using single glue line was spread and then cold pressed with the pressure of $15kg\;cm^{-2}$ for 3 hours. The research result showed an improving dimension stability of com-ply, but not found on all parameters of physical property test. The moisture content seemed to be influenced by the com-ply type, yet not related to its thickness swelling, water absorption and linear expansion. The exception took place in the parallel linear expansion when immersed for 2 hours. The highest to the lowest increases of MOE and MOR were consecutively found on OSB coated with wood veneer of Pine, Mahogany and Avocado. However, the increases were statistically insignificant. The highest increasing screw hold power was found at the com-ply type AE (avocado veneer and epoxy adhesive) that was by 28%.