• Composites Research
• /
• v.33 no.6
• /
• pp.365-370
• /
• 2020

The icing formation at aircraft occur problems such as increasing weight of the body, fuel efficiency reduction, drag reduction, the error of sensor, and etc. The viscosity of polyurethane (PU) topcoat was measured at 60℃ in real time to set the pre-curing time. SiO2 nanoparticles were dispersed in ethanol using ultra-sonication method. The SiO2/ethanol solution was sprayed on PU topcoat that was not cured fully with different pre-curing conditions. Surface roughness of SiO2/PU nanocomposites were measured using surface roughness tester and the surface roughness data was visualized using 3D mapping. The adhesion property between SiO2 and PU topcoat was evaluated using adhesion pull-off test. The static contact angle was measured using distilled water to evaluate the hydrophobicity. Finally, the pre-curing time of PU topcoat was optimized to exhibit the hydrophobicity of SiO2/PU topcoat.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_2
• /
• pp.1709-1722
• /
• 2022

The rise in temperature induced by global warming caused in El Nino and La Nina, and abnormally changed the temperature of seawater. Rainfall concentrates in some locations due to abnormal variations in seawater temperature, causing frequent abnormal floods. It is important to rapidly detect flooded regions to recover and prevent human and property damage caused by floods. This is possible with synthetic aperture radar. This study aims to generate a model that directly derives flood-damaged areas by using modified U-NET and TerraSAR-X images based on Multi Kernel to reduce the effect of speckle noise through various characteristic map extraction and using two images before and after flooding as input data. To that purpose, two synthetic aperture radar (SAR) images were preprocessed to generate the model's input data, which was then applied to the modified U-NET structure to train the flood detection deep learning model. Through this method, the flood area could be detected at a high level with an average F1 score value of 0.966. This result is expected to contribute to the rapid recovery of flood-stricken areas and the derivation of flood-prevention measures.

• The Journal of Engineering Geology
• /
• v.31 no.4
• /
• pp.507-522
• /
• 2021

Specific survey objectives often cannot be met using only one geophysical method, as each method's results are influenced by the specific physical properties of subsurface materials. In particular, areas susceptible to geological hazards require investigation using more than one method in order to reduce risks to life and property. Instead of analyzing the results from each method separately, this work develops a four-quadrant criterion for classifying areas of levees as safe or weak. The assessment is based on statistically determined thresholds of seismic velocity (P-wave velocity from seismic refraction and S-wave velocity from multichannel analysis of surface waves) and electrical resistivity. Thresholds are determined by subtracting the standard deviation from the mean during performance testing of this correlation technique applied to model data of four horizontal and inclined fracture zones. Compared with results from the crossplot of resistivity and P-wave velocity, crossplot analysis using resistivity and S-wave velocity data provides more reliable information on the soil type, ground stiffness, and lithological characteristics of the levee system. A loose and sandy zone (represented by low S-wave velocity and high resistivity) falling within the second quadrant is interpreted to be a weak zone. This interpretation is well supported by the N values from standard penetrating test for the central core.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2B
• /
• pp.169-177
• /
• 2010

Recently due to the typhoon and extreme rainfall induced by abnormal weather and climate change, the probability of severe damage to human life and property is rapidly increasing. Thus it is necessary to create adequate and reliable flood risk map in preparation for those natural disasters. The study area is Seo-gu in Daegu which is located near Geumho river, one of the tributaries of Nakdong river. Inundation depth and velocity at each time were calculated by applying FLUMEN model to the target area of interest, Seo-gu in Daegu. And the research of creating flood risk map was conducted according to the Downstream Hazard Classification Guidelines of USBR. The 2-dimensional inundation analysis for channels and protected lowland with FLUMEN model was carried out with the basic assumption that there's no levee failure against 100 year precipatation and inflow comes only through the overflowing to the protected lowland. The occurrence of overflowing was identified at the levee of Bisan-dong located in Geumho watershed. The level of risk was displayed for house/building residents, drivers and pedestrians using information about depth and velocity of each node computed from the inundation analysis. Once inundation depth map and flood risk map for each region is created with this research method, emergency action guidelines for residents can be systemized and it would be very useful in establishing specified emergency evacuation plans in case of levee failure and overflowing resulting from a flood.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.6
• /
• pp.797-803
• /
• 2024

Bacillus anthracis, a potential biological agent for terrorism, has been actively investigated for its underlying property and phylogenetic origin in the field of Microbial forensics. With the advancement of next generation sequencing(NGS) technology, in silico analysis becomes feasible at the whole genome sequence level, reducing the time and cost. In this paper, we suggested a methodology for identifying unknown samples form the field, which simulate real forensic evidence rather than highly purified samples, utilizing two in silico methods: k-mer analysis and whole genome single-nucleotide polymorphism(wgSNP). We performed prefix-based k-mer analysis using 964 NGS raw data obtained form the NCBI database, along with the NGS data from the unknown samples, by mapping the reads to Ames Ancestor and obtaining the consensus sequence. When analyzed together with 844 assembled sequences obtained form the NCBI database, it was determined that the unknown samples belong to the Injectional anthrax group, which was an infectious group identified among heroin users in Norway in 2000. wgSNP analysis has categorized the sample into discrete low-SNP group-I and high-SNP group-II, with a difference of up to 9 SNPs within each group. We observed 30 SNP positions in group-I, which includes the unknown samples, and confirmed that the SNP of A4564 was identical to that of the unknown samples. These results demonstrate that prefix-based k-mer, and wgSNP analysis can be effectively used for the collection of microbial forensic evidence from field samples.

• Research in Plant Disease
• /
• v.14 no.1
• /
• pp.15-20
• /
• 2008

Three isolates of Cucumber mosaic virus (CMV) were isolated from weed hosts showing typical mosaic symptoms, and some properties of the viruses were investigated. CMV isolates, designated as Is-CMV, Jd-CMV and Pla-CMV from Isodon inflexus, Jeffersonia dubia and Phryma leptostachya var. asiatica, respectively, were identified and characterized by biological reaction in several host plants, serological property, dsRNA analysis, reverse transcription-polymerase chain reaction (RT-PCR), restriction fragment-length polymorphism (RFLP). All isolates systemically infected in Nicotiana benthamiana, Cucurbita pepo cv. Black beauty and Cucumis sativus, and did not reveal any differences in these host plants between the isolates. However, remarkable difference in the symptoms was found between the CMVs in Capsicum annuum. Is-CMV induced an asymptomatic symptoms, while Jd-CMV and Pla-CMV produced severe mosaic symptoms in C. annuum plants. In dsRNA analysis, all isolates revealed four major bands with estimated molecular size of 3.4, 3.2, 2.1 and 1.0 kbp. The cDNAs of coat protein gene of the isolates were amplified by RT-PCR using a genus-specific single pair primers that designed to amplify a DNA fragment of approximately ranging from 938 to 966 bp. By restriction mapping analysis using RFLP of the RT-PCR products as well as by serological properties of gel diffusion test, the CMV isolates belong to a typical members of CMV subgroup IA. This is the first report on the occurrence of CMV in the three weed hosts.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.37 no.1
• /
• pp.1-11
• /
• 2019

This study was conducted to analyze the conservation status by diagnostical methology for the front wall of Jungjeongdang area of Dodong-Seowon. The study was carried out as photogrammetry and mapping - investigation of materials and conservation status - analysis and evaluation of conservation status. The results are as follows. First, in the case of photogrammetry, each photograph was took in superposition, and the distortions of the photographs were corrected and synthesized. Based on this, actual survey drawings of the wall were prepared. Second, in case of material and conservation status, the wall is in the form of Wapyeondam and the material of the head part are tile, mud and lime, and the material of the body part are mud and tile. The mud was mixed with gravel, sand and straw. At the base part, amorphous natural stones and mud were used. The remarkable damage that appears on the wall is erosion of the base part, and some disintegration appears in the body part. There is a biological patina on the head and the base, and vegetation such as lichen is concentrated on the partial body. There was superficial deposit in the head part, and some tiles were broken or lost. Deep fissures are intensively located in some part of the eastern wall. Third, in the case of analysis and evaluation of the conservation status, it is considered that by the erosion of the foundation part and the disintegration of the body part, there is a possibility that physical damage will continue to be applied to the wall, so immediate action is necessary. The distribution of biological patina and vegetation does not appear to cause great problems in the wall, but it is necessary to reduce it in view of aesthetic problems. A cracked or missing tile would need to be replaced, and deep cracks in the eastern wall appear to have been caused by subsidence, and reinforcement of the underground is necessary to prevent further damage.