• Geomechanics and Engineering
• /
• v.1 no.4
• /
• pp.275-289
• /
• 2009

Electroosmosis (EO) is the movement of water in a porous medium under the influence of a direct current (dc). In past decades, electro-osmosis has been successfully employed in many soil improvement and other geotechnical engineering projects. Metal electrodes, such as steel, copper and aluminum have been used traditionally to conduct current. The shortcoming of these electrodes is that they corrode easily during an EO treatment, which results in reduced effectiveness and environmental concerns. More recently, conductive polymers are developed to replace metal electrodes in EO treatment. Electrical vertical drainages (EVDs) are one of these products under trial. The goal of this study is to assess the performance of EVDs for soil improvement and to further understand the scientific principle of the EO process, including the voltage drop at the soil-EVD interface, electrical current density, polarity reversal, and changes in soil physico-chemical properties generated by electroosmosis. It is found from the study that after 19 days of EO treatment with a constant applied dc electric field intensity of 133 V/m, the soil's moisture content decreased by 28%, the shear strength and pre-consolidation pressure increased more than 400%. It is also found that the current density required triggering the water flow in the soil tested, the Korean Yulchon marine clay, is 0.7 $A/m^2$. The project demonstrates that EVDs can serve as both electrodes and drains for soil improvement in short term. However, the EVDs, as tested, are not suitable for polarity reversal in EO treatment and their service life is limited to only 15 days.

• Advances in materials Research
• /
• v.13 no.3
• /
• pp.221-232
• /
• 2024

Waste tire management and recycling have grown to be significant issues because they bring up a global environmental concern. Thus, turning recycled waste tires into useful products may help tackle the environmental issue. This research aims to study and compare the effect of recycled carbon black (rCB) and commercial carbon black (CB) at certain 15 vol. % of filler loading on the mechanical, thermal, morphology and electrical properties of epoxy/CB composites. For this project, epoxy resin, diethyltoluenediamine (DETDA), recovered carbon black (rCB) and commercial carbon black (CB) graded N330, N550, N660 and N774 were mixed and compared accordingly to the formulation determined. The CB content was dispersed in the epoxy matrix using the mechanical mixing technique. The distribution and dispersion of CB in the epoxy matrix affect the characteristics of the conductive composites. rCB content at 15 vol% was selected at fixed content for comparison purposes due to the optimum value in electrical conductivity results. The flexural strength results followed the sequence of rCB>N774>N660>N550>N330. As for electrical conductivity results, epoxy/N330 exhibited the highest conductivity value, while the others achieved a magnitude of X10^-3 due to the highest external surface area of N330. In terms of thermal stability, epoxy/N330 and epoxy/N774 were slightly more stable than epoxy/rCB.

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.2
• /
• pp.44-48
• /
• 2007

In recent years, the size of plane substrates and semiconductor wafers has increased. As conventional contact transportation systems composed of, for example, carrier rollers, belt conveyers, and robot hands carry these longer and wider substrates, the increased weight results in increased potential for fracture. A noncontact transportation system is required to solve this problem. We propose a new noncontact transportation system combining acoustic viscous and aerostatic forces to provide damage-free transport. In this system, substrates are supported by aerostatic force and transported by acoustic viscous streaming induced by traveling wave deformation of a disk-type stator. A ring-type piezoelectric transducer bonded on the stator excites vibration. A stator with a high Q piezoelectric transducer can generate traveling vibrations with amplitude of $3.2{\mu}m$. Prior to constructing a carrying road for substrates, we clarified the basic properties of this technique and stator vibration characteristics experimentally. We constructed the experimental equipment using a rotational disk with a 95-mm diameter. Electric power was 70 W at an input voltage of 200 Vpp. A rotational torque of $8.5\times10^{-5}Nm$ was obtained when clearance between the stator and disk was $120{\mu}m$. Finally, we constructed a noncontact transport apparatus for polycrystalline silicon wafers $(150(W)\times150(L)\times0.3(t))$, producing a carrying speed of 59.2 mm/s at a clearance of 0.3 mm between the stator and wafer. The carrying force when four stators acted on the wafer was $2\times10^{-3}N$. Thus, the new noncontact transportation system was demonstrated to be effective.

• Nuclear Engineering and Technology
• /
• v.55 no.3
• /
• pp.884-894
• /
• 2023

Design and safety assessment of fuel pins for application in innovative Generation IV fast reactors calls for a dedicated nuclear fuel modelling and for the extension of the fuel performance code capabilities to the envisaged materials and irradiation conditions. In the INSPYRE Project, comprehensive and physics-based models for the thermal-mechanical properties of U-Pu mixed-oxide (MOX) fuels and for fission gas behaviour were developed and implemented in the European fuel performance codes GERMINAL, MACROS and TRANSURANUS. As a follow-up to the assessment of the reference code versions ("pre-INSPYRE", NET 53 (2021) 3367-3378), this work presents the integral validation and benchmark of the code versions extended in INSPYRE ("post-INSPYRE") against two pins from the SUPERFACT-1 fast reactor irradiation experiment. The post-INSPYRE simulation results are compared to the available integral and local data from post-irradiation examinations, and benchmarked on the evolution during irradiation of quantities of engineering interest (e.g., fuel central temperature, fission gas release). The comparison with the pre-INSPYRE results is reported to evaluate the impact of the novel models on the predicted pin performance. The outcome represents a step forward towards the description of fuel behaviour in fast reactor irradiation conditions, and allows the identification of the main remaining gaps.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.4
• /
• pp.413-420
• /
• 2003

A gas chromatography/mass spectrometric assay method was developed for the simultaneous determination of neutral and bacis twenty-five disruptors $(ED_S)$ in frog and fish. Afther homogenization and sonication of 5 g of sample, purification was achieves in one step with a solid phase extraction procedure using silica gelflorisl. Eluton was performed with 50mL of acetone : n-hexane (1 : 9) solution. The eluate was concentrated to approximately 10uL and dissolves with 100 uL of hexane and analyzed by GC-MS (SIM). The peaks had good chromatographic properties and the extraction of these compounds from sample also gave relatively high recoveries with small variatoins. Detection limits were 0.1 ng/g for 4-nitrotoluene, benzophenone, hexachlorobenzene, atrazine, malathion, o,p-DDT, o,p-DDT and permethrin, and 0.2 ng/g for heptachlor epoxide, γ-chlordane, α-chlordane, p,p'-DDE, p,p'-DDD, cypermethrin and fenvalerate, and 0.3 ng/g for trifluralin, metribuzin, alachlor, dieldrin and p,p'-DDT, and 0.5 ng/g for heptachlor, aldrin and parathion, and 0.7 ng/g for endrin, and 0.8 ng/g for nitrofen. The recoveries were between 33 and 109%. The method was used to analyze twenty-five frogs and forty-six fishes fishes samples caught from various regions in Korea. Benzophenone was detected at concentration of up to 17.2 ng/g in frog or fish. Heptachlor, aldrin, γ-chlordane, p,p'-DDE, p,p'-DDD, endrin and o,p-DDD were detected at concentrations of 0.7-12.5 ng/g in frog or fish. Also significant leveles of dieldrin (up to 22.5 ng/g) were observed. The developed method may be valuable to be used to the national monitoring project of EDS in biota samples.

• Korean Journal of Computational Design and Engineering
• /
• v.22 no.2
• /
• pp.150-161
• /
• 2017

Effective data exchange among the diverse stakeholders participating in a process plant project is an important issue. ISO 15926 is an international standard to support sharing and integrating of process plant data. iRINGTools is an ISO 15926-based tool used to exchange plant data. To exchange plant data using iRINGTools, the mapping between the data model of a commercial system and ISO 15926 should be preceded. To accomplish this, types and properties of equipment and materials used for plant design should be predefined and these data should be represented as user-defined reference data complying with ISO 15926. Besides, the user-defined reference data should be serviced by a reference data server such that iRINGTools searches reference data from the server and utilizes the data for the model mapping. In this paper, we present a method to construct a reference data server and use it for the model mapping in iRINGTools. The proposed method is verified through experiments of exchanging specifications data of equipment and materials using iRINGTools.

• Tribology and Lubricants
• /
• v.34 no.6
• /
• pp.241-246
• /
• 2018

This research addresses the improvement of tribo-systems, specifically regarding the reduction of friction and wear through tribo-coupling between tetrahedral amorphous carbon (ta-C) with different types of counterpart materials, namely bearing steel (SUJ2), tungsten carbide (WC), stainless steel (SUS304), and alumina ($Al_2O_3$). A second variable in this project is the utilization of different values of duct bias voltage in the deposition of the ta-C coating - 0, 5, 10, 15, and 20 V. The results of this research are expected to determine the optimum duct bias and best counter materials associated with ta-C to produce the lowest friction and wear. Results obtained reveal that the tribo-couple between the ta-C coating and SUJ2 balls produces the lowest friction coefficient and wear rate. In terms of duct bias changes, deposition using 5 V produces the most optimum tribological behavior with lowest friction and wear on the tribo-system. In contrast, the tribo-couple between ta-C with a WC ball causes penetration through the coating surface layer and hence high surface delamination. This study demonstrates that the most effective ta-C coating duct bias is 5 V associated with SUJ2 counter material to produce the lowest friction and wear.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.61.1-61.1
• /
• 2015

We performed a monitoring campaign of a Jupiter-Family comet 17P/Holmes, which underwent the dramatic outburst on 23.3 October 2007 at $r_h=2.44AU$, to investigate the secular change in activity and subsequent physical properties of the inner dust coma before and after the 2014 perihelion passage. The monitoring observation was carried out over two years: from May to July 2013, from July to November 2014, and January 2015 with ~weekly cadence. We conducted photometry monitoring in Rc band using four ground-based telescopes, which are the Ishigakijima Astronomical Observatory 105cm telescope, the Okayama Astrophysical Observatory 50cm telescope, the Nishi-Harima Astronomical Observatory 2m telescope, and the T30 51cm i-telescope, respectively. In order to examine the dust production rate, we put a constraint upon the physical distance from the center of the nucleus as rho=2500km and conducted aperture photometry. We found that the average absolute Rc magnitude over the period between July to November 2014 was mR(1,1,0)~12.29, which was approximately 1.5 magnitudes fainter than those of 2013 data. Accordingly, comet 17P/Holmes seemed to become dormant, although a minor eruption was detected on January 26, 2015. In this presentation, we will introduce our ongoing project for 17P/Holmes and discuss why the nucleus becomes dormant within one orbital period.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.5
• /
• pp.463-471
• /
• 2014

As building height and span is getting taller and longer, the researches to increase material's strength and serviceability are continuously performed. This study evaluated mechanical and chemical properties of newly developed high-strength steel (HSS) for building structures, namely HSA800 and verified cost-effectiveness and applicability of HSS for a tall building by comparing the analysis results of normal strength steel (SM490) model. HSA800 was manufactured by TMCP to have a good weldability in spite of HSS and satisfied Korean Industrial Standards (KS). The analysis results for evaluating cost-effectiveness show that total steel quantity could be saved approximately 30% when using HSS compared to SM490. It is expected that HSA800 will contribute to enhance constructability of building.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.3
• /
• pp.5-12
• /
• 2009

This study presents static and dynamic strength of coal ashes collected from disposal site of power plant. Main compositions of coal ashes were bottom ashes. In order to evaluate static and dynamic characteristics of coal ash, NGI direct-simple shear tests, cyclic simple shear tests and direct shear tests were conducted. The strengths of coal ashes from those tests were compared to those of sands. Bottom ashes among coal ashes used for this study were classified as sand from the grain size distribution and show higher strength properties than the sands. For utilization of coal ashes in civil engineering project, mixing coal ashes with sandy soil using batch plant is inconvenient and the cost is higher than the spreading sand layer and coal layer alternately. In order to simulate both mixing type and layered type construction, sands and coal ashes were mixed with volume ratio 50:50 and prepared sand and coal ash layers alternately with the same volume ratio. From the tests mixed coal ashes-specimen shows slightly higher static and cyclic strength than the layered specimen at the same density. The higher strength seems due to the angular grain of bottom ashes. The cyclic stress ratio at liquefaction decreases rapidly as the number of cycle increases at mixed specimen than that of layered specimen.