• Geomechanics and Engineering
• /
• 제10권2호
• /
• pp.175-188
• /
• 2016

The construction of a new cavern modifies the state of stresses and displacements in a zone around the existing cavern. For multiple caverns, the size of this influence zone depends on the ground type, the in situ stress, the cavern span and shape, the width of the pillar separating the caverns, and the excavation sequence. Performances of underground twin caverns can be unsatisfactory as a result of either instability (collapse) or excessive displacements. These two distinct failures should be prevented in design. This study simulated the ultimate and serviceability performances of underground twin rock caverns of various sizes and shapes. The global factor of safety is used as the criterion for determining the ultimate limit state and the calculated maximum displacement around the cavern opening is adopted as the serviceability limit state criterion. Based on the results of a series of numerical simulations, simple regression models were developed for estimating the global factor of safety and the maximum displacement, respectively. It was proposed that a proper pillar width can be determined based on the threshold influence factor value. In addition, design charts with regard to the selection of the pillar width for underground twin rock caverns under similar ground conditions were also developed.

• Elastomers and Composites
• /
• 제51권4호
• /
• pp.263-268
• /
• 2016

In the polymer shaping process that uses molds, the quality of the molded products is determined not only by the flow of the (molten) polymer but also by the air venting in the cavity. Inadequate air venting in the cavity can cause defects in the product, such as voids, short shot, or black streaks. As it is critical to consider the location and size of the vents for proper venting of the air in the cavity, a method that predicts the flow of air and material is required. The venting of air by the flow of rubber inside the cavity was simulated by using a multi-phase computational fluid dynamics method. Through computer simulation, the interface of rubber and air over time was predicted. Then, the velocity and pressure distribution of the venting air were observed. Our research proposes a fundamental method for analyzing the multi-phase flow of polymer materials and air inside the cavity of a mold.

• 천문학회보
• /
• 제38권1호
• /
• pp.64.1-64.1
• /
• 2013

The point spread function (PSF) of an optical system is in general defined as a two-dimensional intensity distribution which results from a single point source at infinity. It is an important key for the evaluation of the optical performance of an astronomical telescope. The PSFs of the soft X-ray telescope (SXT) aboard Yohkoh were measured in a wide range of the field-of-view under the in-flight configuration at White Sands Missile Range prior to launching the satellite. It has been known that the SXT PSF has a sharp peak at the core and the intensity drops very fast as it goes distant from the center. Due to the combination of this sharp peak at the PSF core and the effect of undersampling by a large pixel size, a carefully designed method is requested in the examination of the PSF data. The pattern of the SXT PSF is determined by the fitting of a mathematical functional form to the pre-launch experimental data. The elliptical Moffat function has been adopted for the evaluation of the SXT PSF. It is revealed from our study that the SXT PSF shows a peculiar characteristics, and thus a careful consideration on the undersampling effect and also a proper choice of statistics are necessary for the determination of the best fit function of the PSF. Details on the on- and off-axis SXT PSF in the field-of-view will be introduced and discussed in our presentation.

• The Korean Journal of Ecology
• /
• 제28권1호
• /
• pp.1-6
• /
• 2005

This study was conducted to develop the predictive model for species richness of breeding birds by multivariate analysis of land covers (percentage value of each cover in 300 $\times$ 300m grid) including water area (WA), urbanized area (UA), green area (GA), forest area (FA) and agricultural area (AA) at Seongnam City in Korea. Fifty-nine species of birds were mapped on 155 grids in size of 300 $\times$ 300 m from 2000 to 2001. Species richness of breeding birds was significantly regressed ($R^2=0.85$, n=155) by estimates of WA ($4.59{\pm}1.13$, P<0.0001), UA ($6.50{\pm}0.86$, P<0.0001), GA ($7.11{\pm}1.25$, P<0.0001), FA ($8.51{\pm}0.62$, P<0.0001), and AA ($4.59{\pm}1.13$, P<0.0001). In validation of model, the results show no significant difference between predicted value of species richness and observed one. Developed model can be used as a predictive model of species richness of birds for selecting the proper location of corridors and parks in urban area.

• 동아시아경상학회지
• /
• 제4권4호
• /
• pp.24-32
• /
• 2016

There hardly have been support policies for small wholesale vendors or any materials such as proper statistical standards and figures compared to diversity of support policies and size of budget for small and medium manufacturing business. The biggest concern coming from it is that there have never been any policies for small and medium wholesale vendors. This study proposes some ways to improve support policies through investigating the current status of those vendors as their true values haven't been properly recognized, while diverse support systems have been devised for manufacturing business thanks to the traditional industrial development process. According to the study on support policies for domestic and international small and medium wholesale vendors, I realized that those vendors need a policy to ensure them to be promptly adjusted to the rapidly changing distribution environment and to be competitive to access to the global distribution market to finally become hidden champions through systematical operations of small and medium wholesale vendors and implementing educational business through sales management. Therefore, I propose five ways to improve support policies for small and medium wholesale vendors by considering social and economic value, systematizing small wholesalers and scaling small and medium wholesale vendors, reinforcing support for wholesalers, support policies for new online market opening and offline market opening.

• Steel and Composite Structures
• /
• 제45권2호
• /
• pp.281-291
• /
• 2022

Surmounting complexities in analyzing the mechanical parameters of concrete entails selecting an appropriate methodology. This study integrates a novel metaheuristic technique, namely satin bowerbird optimizer (SBO) with artificial neural network (ANN) for predicting uniaxial compressive strength (UCS) of concrete. For this purpose, the created hybrid is trained and tested using a relatively large dataset collected from the published literature. Three other new algorithms, namely Henry gas solubility optimization (HGSO), sunflower optimization (SFO), and vortex search algorithm (VSA) are also used as benchmarks. After attaining a proper population size for all algorithms, the Utilizing various accuracy indicators, it was shown that the proposed ANN-SBO not only can excellently analyze the UCS behavior, but also outperforms all three benchmark hybrids (i.e., ANN-HGSO, ANN-SFO, and ANN-VSA). In the prediction phase, the correlation indices of 0.87394, 0.87936, 0.95329, and 0.95663, as well as mean absolute percentage errors of 15.9719, 15.3845, 9.4970, and 8.0629%, calculated for the ANN-HGSO, ANN-SFO, ANN-VSA, and ANN-SBO, respectively, manifested the best prediction performance for the proposed model. Also, the ANN-VSA achieved reliable results as well. In short, the ANN-SBO can be used by engineers as an efficient non-destructive method for predicting the UCS of concrete.

• 대한의용생체공학회:의공학회지
• /
• 제27권2호
• /
• pp.53-58
• /
• 2006

In this study, transverse relaxation time (T2) measurement and the evaluation of the characteristics of the spectral peak related to stomach tissue metabolites were performed using ex vivo proton magnetic resonance spectroscopic imaging (MRSI) at 1.5-T MRI/S instruments. Thirty-two gastric tissues resected from 12 patients during gastric cancer surgery, of which 19 were normal tissue and 13 were cancerous tissue, were used to measure the $T_2$ of the magnetic resonance spectroscopy (MRS) peaks. The volume of interest data results from the MRSI measurements were extracted from the proper muscle (MUS) layer and the composite mucosa/submucosa (MC/SMC) layer and were statistically analyzed. MR spectra were acquired using the chemical shift imaging (CSI) point resolved spectroscopy (CSI-PRESS) technique with the parameters of pulse repetition time (TR) and echo times (TE) TR/(TE1,TE2)=1500 msec/(35 msec, 144 msec), matrix $size=24{\times}24$, NA=1, and voxel $size=2.2{\times}2.2{\times}4mm^3$. In conclusion, the measured $T_2$ of the metabolite peaks, such as choline (3.21ppm) and lipid (1.33ppm), were significantly decreased (p<0.01 and p<0.05, respectively) in the cancerous stomach tissue.

• 한국정밀공학회지
• /
• 제19권2호
• /
• pp.114-125
• /
• 2002

As semi-solid forging (SSF) is compared with conventional easting such as gravity die-easting and squeeze casting, the product without inner defects can be obtained from semi-solid forming and globular microstructure as well. Generally speaking. SSF consists of reheating, forging, ejecting precesses. In the reheating process, the materials are heated up to the temperature between the solidus and liquidus line at which the materials exists in the form of liquid-solid mixture. The process variables such as reheating time, reheating temperature, reheating holding time, and induction heating power have much effect on the quality of the reheated billets. It is difficult to consider all the variables at the same time when predicting the quality. In this paper, Taguchi method, regression analysis and neural network were applied to analyze the relationship between processing conditions and solid fraction. A356 alloy was used for the present study, and the learning data were extracted by the reheating experiments. Results by neural network were on good agreement with those by experiment. Polynominal regression analysis was formulated by using the test data from neural network. Optimum processing condition was calculated to minimize the grain size, solid fraction standard deviation, otherwise, to maximize the specimen temperature average. In this time, discussion is liven about reheating process of row material and results are presented with regard to accurate process variables for proper solid fraction, specimen temperature and grain size.

• 대한수학교육학회지:수학교육학연구
• /
• 제21권1호
• /
• pp.17-32
• /
• 2011

본 연구에서는 예비교사들의 통계적 표집에 대한 이해를 조사하였다. 먼저 선행 연구를 바탕으로 표집의 이해와 관련된 주요 주제를 표본의 대표성, 표집 변이성, 표집분포로 구분하고, 각각의 주요 주제에 대한 세부 개념 요소들을 선정하였다. 이에 대한 예비교사들의 이해를 조사한 결과 대부분의 예비교사들이 편의를 일으키지 않는 무작위 추출이 표집방법으로 적절함을 이해하고 있었으나 약 64%의 예비교사들만이 표본을 모집단의 준비례적 축소버전으로 인식하고 있었다. 표집에서 표본이 모집단에서 차지하는 비율보다 표본의 크기 자체가 중요함을 인식하는 예비교사는 극소수에 불과했으며, 조사 대상의 절반에 해당하는 예비교사들만이 신뢰할 수 있는 결과를 도출하기 위해 전체 표본의 크기가 아니라 표집 횟수가 중요함을 인식하였다. 그리고 표집분포는 모집단 분포의 형태와 무관하게 모집단의 평균을 중심으로 대칭적인 형태를 나타낸다는 것을 이해하는 예비교사는 매우 적었다.

• Journal of Gastric Cancer
• /
• 제11권1호
• /
• pp.31-37
• /
• 2011

Purpose: We performed this study to evaluate the clinical presentation as well as the proper surgical intervention for ovarian metastasis from gastric cancers and these tumors were identified during postoperative follow-up. This will help establish the optimal strategy for improving the survival of patients with this entity. Materials and Methods: 22 patients (3.2%) with ovarian metastasis were noted when performing a retrospective chart review of (693) females patients who had undergone a resection for gastric cancer between 1981 and 2008. The covariates used for the survival analysis were the patient age at the time of ovarian relapse, the size of the tumor, the initial TNM stage of the gastric cancer, the interval to metastasis and the presence of gross residual disease after treatment for Krukenberg tumor. The cumulative survival curves for the patient groups were calculated with the Kaplan-Meier method and they were compared by means of the Log-Rank test. Results: The average age of the patients was 48.6 years (range: 24 to 78 years) and the average survival time of the 22 patients was 18.8 months (the estimated 3-year survival rate was 15.8%) with a range of 2 to 59 months after the diagnosis of Krukenberg tumor. The survival rate for patients without gross residual disease was longer than that of the patients with gross residual disease (P=0.0003). In contrast, patient age, the size of ovarian tumor, the initial stage of gastric adenocarcinoma, the interval to metastasis and adjuvant chemotherapy were not prognostic indicators for survival after the development of ovarian metastasis. Conclusions: Early diagnosis and complete resection are the only possible hope to improve survival. As the 3-year survival rate after resection of Krukenberg tumor is 15.8%, it seems worthwhile to consider performing tumorectomy as the second cytoreduction.