• Journal of Environmental Health Sciences
• /
• v.37 no.6
• /
• pp.460-466
• /
• 2011

Objectives: Students in elementary schools usually wash their hands in a washstand. However, little attention is paid to the washstand itself. Today, the importance of personal sanitation and hygiene is greatly emphasized. Therefore students' parents and the public are growing increasingly interested in accessibility to washstands by elementary school students in their schools. Methods: With respect to this study, a survey of students and teachers inelementary schools was performed on the installation of washstands in order to determine the proper number of washstands per school. Results: The results show that 1.1 boys (per class) need a washstand, while 1.8 girls (per class) do so in order to maintain a 50% level of crowdedness. By of the regression equation, to maintain 50% congestion (50% of all students feel congestion) there should be 18.5 boys, and the 15.76 girls per washstand. Table 3 is based on the above results, the number of students per washstand (x) and congestion (y), separated by gender according to the results of regression analysis, the correlation of male models in the linear regression analysis and correlation of girls in the regression equation can be obtained. The linear regression fit of less than 0.7 determines that the coefficients of determination are 0.5399 and 0.4195, respectively. Significance was much smaller. Also, according to the simulation using the diffusion model, with 29 students per class more than one washstand should be provided in a school. Girls (per class) need 0.7 more washstands than boys (per class). Conclusions: More washstand facilities for girls than boys are needed. If the target is based on school class size two washstands should be installed. Finally, guidelines and/or standards in the Schools Health Act of Korea forin elementary school washstands is considerably needed.

• Archives of Plastic Surgery
• /
• v.39 no.6
• /
• pp.637-642
• /
• 2012

Background Fingertip injuries involving subtotal or total loss of the digital pulp are common types of hand injuries and require reconstruction that is able to provide stable padding and sensory recovery. There are various techniques used for reconstruction of fingertip injuries, but the most effective method is functionally and aesthetically controversial. Despite some disadvantages, cross-finger pulp flap is a relatively simple procedure without significant complications or requiring special techniques. Methods This study included 90 patients with fingertip defects who underwent cross-finger pulp flap between September 1998 and March 2010. In 69 cases, neurorrhaphy was performed between the pulp branch from the proper digital nerve and the recipient's sensory nerve for good sensibility of the injured fingertip. In order to evaluate the outcome of our surgical method, we observed two-point discrimination in the early (3 months) and late (12 to 40 months) postoperative periods. Results Most of the cases had cosmetically and functionally acceptable outcomes. The average defect size was $1.7{\times}1.5$ cm. Sensory return began 3 months after flap application. The two-point discrimination was measured at 4.6 mm (range, 3 to 6 mm) in our method and 7.2 mm (range, 4 to 9 mm) in non-innervated cross-finger pulp flaps. Conclusions The innervated cross-finger pulp flap is a safe and reliable procedure for lateral oblique, volar oblique, and transverse fingertip amputations. Our procedure is simple to perform under local anesthesia, and is able to provide both mechanical stability and sensory recovery. We recommend this method for reconstruction of fingertip injuries.

• Journal of Fashion Business
• /
• v.10 no.2
• /
• pp.83-98
• /
• 2006

With the subjects of male consumers in their 20s to 40s living in the Ningbo area in Zhejiang Province, this study aims to investigate into the reality of their purchase attitude and size fitness of ready-made suits. The results are as follows; Looking into their demographic characteristics, 70.6% of the subjects were twenties, 60.6% were single, and educational career stood in the order of college, middle school, and high school graduation. They were largely absorbed in free trade, followed by teaching, commerce and service industry. 59.6% of them were Zhejiang Province belongs. One to two thousand yuan was the greatest portion of their monthly income. As for their purchase attitude of ready-made suits, they thought higher of material, quality, activity, and solidity than of design. They preferred to buy clothes at a department store. There was significant difference between purchase frequency and purchase price according to monthly income and jobs. Concerning brand recognition, the Chinese subjects favored "Youngor." Though Korea's brands were very lowly recognized, Korean products received really high recognition. Compared with China's brands, they found foreign brands excellent in design, followed by material/matter, wear, and sewing. As to their physical satisfaction and the size fitness of clothes, most subjects felt happy with their sizes. Trousers and jackets were among the unfitting suit items, while the girth of waist was the least satisfactory size. Therefore, in order to raise the market occupation rate of Korean suit goods in China, more aggressive marketing strategies are required to utilize the current Korean-style entertainment and maximize concerning brand images. In particular, outstanding products in consideration of prices should be made through the proper patternmaking to reflect the body types of the Chinese.

• Investigative Magnetic Resonance Imaging
• /
• v.19 no.2
• /
• pp.76-87
• /
• 2015

Purpose: There is an ongoing search for a stent material that produces a reduced susceptibility artifact. This study evaluated the effect of manganese (Mn) content on the MRI susceptibility artifact of ferrous-manganese (Fe-Mn) alloys, and investigated the correlation between MRI findings and measurements of Fe-Mn microstructure on X-ray diffraction (XRD). Materials and Methods: Fe-Mn binary alloys were prepared with Mn contents varying from 10% to 35% by weight (i.e., 10%, 15%, 20%, 25%, 30%, and 35%; designated as Fe-10Mn, Fe-15Mn, Fe-20Mn, Fe-25Mn, Fe-30Mn, and Fe-35Mn, respectively), and their microstructure was evaluated using XRD. Three-dimensional spoiled gradient echo sequences of cylindrical specimens were obtained in parallel and perpendicular to the static magnetic field (B0). In addition, T1-weighted spin echo, T2-weighted fast spin echo, and $T2^*$weighted gradient echo images were obtained. The size of the low-intensity area on MRI was measured for each of the Fe-Mn binary alloys prepared. Results: Three phases of ${\alpha}^{\prime}$-martensite, ${\gamma}$-austenite, and ${\varepsilon}$-martensite were seen on XRD, and their composition changed from ${\alpha}^{\prime}$-martensite to ${\gamma}$-austenite and/or ${\varepsilon}$-martensite, with increasing Mn content. The Fe-10Mn and Fe-15Mn specimens comprised ${\alpha}^{\prime}$-martensite, the Fe-20Mn and Fe-25Mn specimens comprised ${\gamma}+{\varepsilon}$ phases, and the Fe-30Mn and Fe-35Mn specimens exhibited a single ${\gamma}$ phase. The size of the low-intensity areas of Fe-Mn on MRI decreased relative to its microstructure on XRD with increasing Mn content. Conclusion: Based on these findings, proper conditioning of the Mn content in Fe-Mn alloys will improve its visibility on MR angiography, and a Mn content of more than 25% is recommended to reduce the magnetic susceptibility artifacts on MRI. A reduced artifact of Fe-Mn alloys on MRI is closely related to the paramagnetic constitution of ${\gamma}$-austenite and/or ${\varepsilon}$-martensite.

• Nuclear Engineering and Technology
• /
• v.49 no.7
• /
• pp.1524-1536
• /
• 2017

During the fabrication process of reactor vessel head penetration (RVHP), the grain size of the tube material can be changed by hot or cold work and the inner side of the tube can also be shrunk due to welding outside of the tube. Several nonregular time-of-flight diffraction (TOFD) signals were found because of deformed grains. In this paper, an investigation of nonregular TOFD indications acquired from RVHP tubes using experiments and computer simulation was performed in order to identify and distinguish TOFD signals by coarse grains from those by Primary Water Stress Corrosion Crack (PWSCC). For proper understanding of the nonregular TOFD indications, microstructural analysis of the RVHP tubes and prediction of signals scattered from the grains using Finite Element Method (FEM) simulation were performed. Prediction of ultrasonic signals from the various sizes of side drilled holes to find equivalent flaws, determination of the size of the nonregular TOFD indications from the coarse grains, and experimental investigation of TOFD signals from coarse grain and shrinkage geometry to identify PWSCC signals were performed. From the computer simulation and experimental investigation results, it was possible to obtain the nonregular TOFD indications from the coarse grains in the alloy 690 penetration tube of RVHP; these nonregular indications may be classified as PWSCC. By comparing the computer simulation and experimental results, we were able to confirm a clear difference between the coarse grain signal and the PWSCC signal.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1381-1384
• /
• 2005

In these days, the piezoresistive material has been applied to various sensors in order to measure the change of physical quantities. But the relationship between the sensitivity of a sensor and the position and size of piezoresistor has rarely been studied. Therefore, this paper was focused on the distribution of the resistance change ratio on the diaphragm and bridge surface where piezoresistor would be formed, and proposed the proper size and position of piezoresistor with which the sensitivity of sensor was increased. As the width of mass and boss was increased, the distance between piezoresistors was closed and the maximum value of resistance change ratio was decreased by the increase of the structure stiffness. And according to the increment of seismic mass size, the value of resistance change ratio is decreased by increase of the structure stiffness. Y directional piezoresistor is formed in the position of $100\mu{m}\;apart\;from\;cantilever\;edge\;and\;length\;of\;that\;is\;800\mu{m}$.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.11
• /
• pp.981-988
• /
• 2016

Dynamometer is a device for testing the performance of the brake and it is composed of a test zone, the mechanical inertia zone, the electric motor and the control zone. Hybrid dynamometer is a way to compensate for the loss of mechanical inertia in accordance with the brake operation by using an electric motor to reduce the size of the mechanical inertia with the advantage that can be tested in the relatively small size of the mechanical inertia and low cost. In this paper, design the proper size of hybrid dynamometer in the laboratory level with the space constraints, analysed the effect of critical parameter on the braking performance of hybrid dynamometer such as changing the friction coefficient. With this study, could get the results of guideline to judge the poor friction material by measuring the torque of the electric motor to compensate the energy loss due to a reduced mechanical inertia.

• International Journal of Advanced Culture Technology
• /
• v.1 no.2
• /
• pp.24-32
• /
• 2013

This paper determined students' ranks of difficulty on the use of materials in terms of 1) understanding the layout of the learning materials, 2) reading comprehension of the learning materials, and 3) realization on relevance to needs of the learning materials. It also determined students' 4) rank and frequency of attitude on the materials. With the data gathered through 128 survey questionnaires, 7 focused group discussions, and 10 interviews, the results were found out that there was an inappropriate assessment procedure set by this particular university. The researcher concludes that: 1) design of four types of classes by just using the two textbooks with their respective workbooks is grammar-based with limited conversation activities; 2) placement for these students in one big class size was implemented without considering their common interest and motivation and language levels; and, 3) qualification of teachers teaching these EFL students did not support students' real needs and the language program itself. Content professors who were made to teach may have the ability to input learning, but their teaching styles may differ from the ones who are real English teachers. This paper then recommends that teachers and school administration should have an appropriate placement exam before students attend the class, especially in a big class size. There could only be a few problems among students in one big class size when students' level of competence is proportioned. With this, topics and conversation activities can even be more flexible with the maneuver of art of questioning, various dimensions of thinking, strategic competence, learning attitude or behavior, etc. to ensure sustenance of communicative mode and level of interest and motivation in the classroom. Grammar-based instruction can only be taught when a need arises. Thus, the course description of each class will be able to transact the objectives ready for developing students' communication competence. Moreover, proper measurement can be utilized to validly assess the amount of students' learning and the progress of language curriculum design in terms of materials selection and teaching approach.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.15 no.2
• /
• pp.1-21
• /
• 1987

This study was conducted to find out the fundamentals for proper use of Planting system in the elementary school landscape. For this study, 70 text books were applied to quote the plants, planting situation of 15 elementary schools was surveyed, and 1,464 questionnaires were collected. The resultes and some proposals obtained are summarised as follows ; 1. Total of 177 plant species were quoted over all text books of the elementary school course. Among them, the woody species showed the highest in number with 58 and herbaceous were the next with 30, the other were vegetable of 29, food crops, weeds, industrial ornamentals crops and water plants in order. They were common species in this country and were easy to cultivate except few. 2. 210 species were planted at the 15 elementary schools in Mokpo. It was constituted of 77 of herbaceous species and 133 of woody species but localized Plants were little. The herbaceous plant frequently used were Chrysanthemum morifolium, Targests erecta, Salvia splendens, Petunia hybrida, Cosmos bipinnatus, Celosia cristata, Canna generalis, et. On the other hand in the woody species Juniperus chinensis var. kaizuka, Cerdus deodora, Camellia japonica, and in the shrub Serissa japonica, Thuja orientalis, Euonymus japonica, Buxus mrcrophylla var. koreana etc in order. Almost the same species of woody plants described above were planted in zone of I -IV. Therefore, many problems were found in aspect of aesthetics, and their function and growth. There was much differences in number of species and quantity of plants in each elementary school. However they were not associated with school size, location, and age of schools. Most of elementary schools did not have same the plants as they were represented in text brooks. Therefore, in view of educational purpose it needs to plant more species which quoted in text books.

• Journal of the Korean Dietetic Association
• /
• v.4 no.2
• /
• pp.123-131
• /
• 1998

The purpose of this study was to evaluate the preference trend of frequently served meals in the elementary school lunch program. Therefore, this evaluation was surveyed on frequently served meals in the elementary school lunch program in Inchon. Also, this study was surveyed on food preference using questionnaire including frequently served food items. Statistical analysis of data was completed using SAS program. The results of this survey was as follows: 1. Freqrenctly served foods were 56 food items including 5 boiled rice, 3 one course dishes, 10 soup & pot stewes, 10 fresh & boiled salads, 8 stirred fries, 7 stewes, 6 grill & fries, 3 kimchies and 4 desserts. 2. Students liked barley bab more than the other kinds of cooked rice. One course dishes were preferred most by the subjects. Among soup & pot stewes, fermented soybean paste stew showed lower preference than the other kind of stewes. Among fresh & boiled salads, fruits salad was the most favore, whereas, root of bellflower salad was the most hated. Among side-dishes by different preparation method, stir fries, stewes, grill & fries, kimchies, dessert were prefered most by the subjects. There were significant difference between male and female students for most given foods except soup & pot stewes. Female students showed higher preference for most given foods except fresh & boiled salads, kimchies, dessert than male students.