• 한국식품영양과학회지
• /
• 제28권6호
• /
• pp.1304-1309
• /
• 1999

The respiratory characteristics and quality attributes of mature green mume fruits as influenced by modified atmosphere packaging(MAP) conditions during storage at 25oC for 8 days were investigated. The quality attributes of mume fruits were evaluated in terms of fresh weight loss, physiological injury and yellowing. The packaging materials used for MAP were low density polyethylene(LDPE) films with various different thicknesses. Yellowing and fresh weight loss of mume fruits were noticeably reduced by the packaging treatments with LDPE A and B. The physiological injury of the fruits during storage was found to be more severe in LDPE C than others. For LDPE A and B, the oxygen and carbon dioxide contents within the packages of Mume fruits maintained at the levels of 2~3% and 7~8%, respectively. With respect to visual quality, MAP prolonged the shelf life of the fruits much longer compared with the unsealed control. From the experimental results, it is suggested that the LDPE films with the gas trans mission rates of about 2,100 O2 ml/m2.day.atm and 6,700 CO2 ml/m2.day.atm would be proper for MAP of mature green mume fruits during storage at ambient temperature.

• 마이크로전자및패키징학회지
• /
• 제23권4호
• /
• pp.57-61
• /
• 2016

대용량 전력저장용 황화나트륨 기반의 전지를 개발함에 있어서 베타 알루미나 고체 전해질 튜브와 알파 알루미나 셀 캡 간의 물리적 접합을 위해서는 세라믹-세라믹 접합용 씰링 글라스 후막 페이스트가 필요하다. 본고에서는 글라스 프릿 분말의 입도, 열처리 조건이 씰링 글라스의 열처리 후 미세구조 특히 기공율과 그 분포에 미치는 영향을 연구하였다. 씰링 글라스 분말의 입자가 클수록 열처리 후의 글라스의 미세 조직상에서의 기공율 및 기공의 수가 감소하였으며, 열처리 온도가 증가 할수록 기공의 수가 감소하는 반면 기공의 크기는 증가함을 확인하였다. 이로써 글라스 씰란트의 제조에 있어서, 글라스 페이스트용 글라스 프릿 분말의 입자 크기와 씰링 열처리 온도의 적절한 선정에 의해 글라스 씰링부의 미세구조에서 기공율과 기공의 분포 및 기공의 수를 제어할 수 있음을 보여주었다.

• 한국동물위생학회지
• /
• 제36권4호
• /
• pp.291-296
• /
• 2013

The purpose of this study was to determine food safety practices and procedures based on Hazard Analysis Critical Control Point (HACCP) system and to suggest more effective method of HACCP implementation in meat packaging industry in Korea. We used the non-compliance rate of each evaluation item to compare the weak points of prerequisite requirements and HACCP. The prerequisite items related to facility, equipment, and tools showed inadequate level of requirements or unsanitary conditions for proper HACCP operation. A lack of understanding of sanitation standard operation procedures was identified as a fundamental barrier to HACCP implementation. High rate of non-compliance in HACCP items compared to prerequisite requirements signify that small businesses have potential difficulties of applying HACCP due to lack of technical expertise, financial resources for prerequisite requirements, and available personnel to prepare and operate HACCP plan. Also we suggest to revise and minimize current critical control points (CCPs). Time-temperature control of cold-storage rooms for carcasses and final products could be performed by control points of prerequisite requirements. As the occurrence frequency getting lower, metal detector should be replaced by intensified training of sanitary handling and safety procedure. This will be more effective and preventive measures against physical contaminants including metal particles. In conclusion, control point of prerequisite requirement may replace CCP in the plant with simple processing line and no heating process such as meat packaging industry.

• 펄프종이기술
• /
• 제39권2호
• /
• pp.68-77
• /
• 2007

It is necessary to recognize philosophical and scientific depth, contained in traditional culture in a correct fashion, in order to succeed and develop our excellent traditional culture. Some studies on storage, circulation, and package design of traditional food will multiple the added value of traditional culture. So this research was carried out for making packing cases of kinds of Korean dried confectionery using Hanji by traditional manufacturing method, Hanji textile, charcoal Hanji and jade Hanji, and for developing environmental-friendly Korean dried confectionery package as more luxurious packaging papers by putting an exterior design on the surface. The results measured physical properties, air permeability and anti-mold activity of Hanji, and designing Korean dried confectionery are as follows. The physical properties and air permeability used to manufacture Korean dried confectionery package, turned out to be no affection to the food packaging Hanji. In order to avoid the monotonousness of Korean dried confectionery package, it was designed with Hanji textile together with elegant traditional pattern. It is estimated to increase the value of Korean dried food and to make the anti-mold activity of Hanji added charcoal and jade effective. In conclusion, by developing individual properties of traditional food and proper packaging paper as well as packaging design according to circulating situation, it is considered that the taste and the fancy can be maximized. After all, by applying excellent traits contained in our race's culture, it is possible to develop the package cases into competitive ones. And it would be able to increase utilization of Hanji. Namely, production of high quality traditional food package with Hanji is expected for new valuable industry of Hanji.

• Journal of Biosystems Engineering
• /
• 제29권6호
• /
• pp.501-507
• /
• 2004

Fruits we subjected to complex dynamic stresses in the transportation environment. During a long journey from the production area to markets, there is always some degree of vibration present. Vibration inputs are transmitted from the vehicle through the packaging to the fruit. Inside, these cause sustained bouncing of fruits against each other and container wall. These steady state vibration input may cause serious fruit injury, and this damage is particularly severe whenever the fruit inside the package is free to bounce, and is vibrated at its resonant frequency. The determination of the resonant frequencies of the fruit may help the packaging designer to determine the proper packaging system providing adequate protection for the fruit, and to understand the complex interaction between the components of fruit when they relate to expected transportation vibration inputs. The vibration characteristics of the pears in corrugated fiberboard container in transit were analyzed using FEM (finite element method) modeling, and the FEM modeling approach was first validated by comparing the results obtained from simulation and experiment for the pear in the frequency range 3 to 150 Hz and acceleration level of 0.25 G-rms and it was found that between simulated and measured frequencies of the pears have a relatively good agreement. It was observed that the fruit and vegetables in corrugated fiberboard container could be analyzed by finite element method. As the elastic modulus of the cushion materials of corrugated fiberboard pad and tray cup decreased, the first frequencies of upper and lower pears increased and the peak acceleration decreased.

• 한국식품조리과학회지
• /
• 제28권2호
• /
• pp.207-214
• /
• 2012

양배추 김치를 직접 제조하여 PET vessel, PP tray, OPP/AL/PE 그리고 Nylon/PE/LLDP 4가지 포장재에 소포장하여 $4^{\circ}C$ 저장온도에서 김치 품질 특성을 결정하는 젖산균수, 염도, 당도, pH, 산도, 전자공여능 그리고 관능특성 변화를 살펴보았다. pH 변화는 담금 직후 pH 6.24~6.43 범위로 저장 7일째까지 큰 변화를 보이지 않았으나 7일부터 14일까지 급격히 낮아졌으며 산도는 저장 35일째까지 계속 증가하여 PET vessel는 0.79%, OPP/AL/PE는 0.83%로 나타났고 그 이후 큰 변화를 보이지 않았다. 염도는 저장기간 중에 큰 변화를 보이지 않았으며 당도는 전반적으로 4종류의 포장재 모두 증가하다가 저장 7일째를 기준으로 그 이후 감소하는 경향을 보였다. 젖산균수는 OPP/AL/PE에 저장되었던 양배추 김치가 저장 14일째 이후 가장 높게 나타났으며 전자공여능은 발효 적기에 가장 높았다가 발효적기를 지나면서 모든 포장재가 감소하는 경향을 보였으나 OPP/AL/PE는 최고 93.18%이후에도 높은 수준의 항산화능을 나타냈다. 관능특성은 생김치보다 익은 김치가 우수하였으며, OPP/AL/PE 14일째의 양배추 김치는 맛과 종합기호도에서 6.70과 6.60를 나타내 OPP/AL/PE 포장재가 양배추 소포장김치의 상품화를 위해 가장 적절한 포장재로 판단된다. 향후 양배추 소포장 김치의 산업화를 위해서는 배추김치나 중대형포장과 비교하여 원료에 따른 특성과 소포장이라는 차이를 고려하여 차별적인 제조 공정이 개발되어야 할 것이다.

• 한국식품영양과학회지
• /
• 제43권6호
• /
• pp.901-908
• /
• 2014

블루베리 및 딸기의 품질유지를 위한 MAP의 활용 가능성을 확인하고자 비가열 병합 처리 세척과정을 거친 '엘리오트' 블루베리와 '설향' 딸기 시료를 기체투과도가 다른 polyolefin film(6,000 mL $O_2/m^2{\cdot}24hr{\cdot}atm$ at $24^{\circ}C$)과 PA/PA/PE film(60 mL $O_2/m^2{\cdot}24hr{\cdot}atm$ at $24^{\circ}C$)에 각각 포장한 후 $4^{\circ}C$에 저장하면서 품질 변화를 측정하였다. 수확 후 블루베리와 딸기에 병합 세척처리를 한 결과, 총 호기성균은 각각 2.50, 1.97 log CFU/g, 효모 및 곰팡이에서는 각각 1.95, 2.18 log CFU/g의 감균 효과를 얻어 우수한 살균 효과를 나타내었다. 또한 PA/PA/PE film 포장에 의한 낮은 기체투과도로 인한 높은 이산화탄소 농도 환경에서 미생물의 생육이 저장 중 억제되는 것을 확인하였고, 중량 감소율에 있어서도 높은 기체투과도를 갖는 polyolefin film으로 포장한 처리구보다 낮은 감소율을 보여, 소포장된 블루베리와 딸기의 경우 기체투과도가 낮은 포장재를 이용하는 것이 효율적인 것으로 나타났다. 따라서 본 연구 결과, 수확 후 블루베리 및 딸기의 적절한 기체 조성을 위한 포장재의 선택은 품질 유지 및 유통기한 증대에 도움을 줄 것으로 판단된다.

• 마이크로전자및패키징학회지
• /
• 제24권3호
• /
• pp.77-81
• /
• 2017

Pulse electroplating of Ni-P alloy was studied to fulfill the material requirement to the advanced vertical probe tip in wafer probe card. The major concerns are for the electrical conductivity and yield strength. Plating parameters such as current density, duty cycle and solution components were examined to obtain the nanocrystal structure and proper percentage of phosphorus, leading to how to control the nanocrystal grain growth and precipitation of $Ni_3P$ after heat treatment. Among the parameters, the amount of phosphorus acid was the main factor affecting on the grain size and sheet resistance, and the amount of 0.1 gram was appropriate. Since hardness in Ni-P alloy is increased by as-plated nanocrystal structure plus precipitation of $Ni_3P$, the concentration of P less than 15 at% was better choice for the grain coarsening without minus in hardness value. The following heat treatment made grain growth and dispersion of precipitates adjustable to meet the target limit of resistance of $100m{\Omega}$ and hardness number of over 1000Hv. The Ni-P alloy will be a candidate for the substitute of the conventional probe tip material.

• 펄프종이기술
• /
• 제35권1호
• /
• pp.19-26
• /
• 2003

In recent years, numerous studies have been carried out to find out the possible substitution of PE-coated paperboards used in packaging of watery or oily foods. Accordingly, this study was carried out to obtain the basic data for producing higher functional coating agents for pulp mold by evaluating various kinds of mixed coating agents. At that time, two kinds of synthetic coating agents(AKD, PYA) and three kinds of natural coating agent(CMC, corn starch, oxidized starch) were used for making the mixed coating agents respectively. Physical properties of coated paperboards were tested. Conclusions obtained from this study were as follows. Based on concentrations, the proper mixture ratios were 10:90(AKD:CMC), 10:90(AKD:corn starch), 10:90(AKD:oxidized starch), 40:60(PVA:CMC), 20:80(PVA:corn starch) and 20:80(PYA:oxidized starch). The mixed coating agent of PYA:corn starch(20:80) was the most efficient coating agent. Consequently, water and oil resistance were improved even with much addition of natural coating agents. We consider that they can be suitable for the packaging used in the storage of higher moisture vegetables and other food, and also can be suitable for oily fried food.

• 마이크로전자및패키징학회지
• /
• 제5권1호
• /
• pp.7-18
• /
• 1998

In the flip chip interconnection on organic substrates using eutectic Pb/Sn solder bumps highly reliable Under Bump Metallurgy (UBM) is required to maintain adhesion and solder wettability. Various UBM systems such as 1$\mu$m Al/0.2$\mu$m Pd/1$\mu$m Cu, laid under eutectic Pb/Sn solder were investigated with regard to their interfacial reactions and adhesion proper-ties. The effects of numbers of solder reflow and aging time on the growth of intermetallic compounds (IMCs) and on the solder ball shear strength were investigated. Good ball shear strength was obtained with 1$\mu$m Al/0.2$\mu$m Ti/5$\mu$m Cu and 1$\mu$m Al/0.2$\mu$m ni/1$\mu$m Cu even after 4 solder reflows or 7 day aging at 15$0^{\circ}C$. In contrast 1$\mu$m Al/0.2$\mu$m Ti/1$\mu$m Cu and 1$\mu$mAl/0.2$\mu$m Pd/1$\mu$m 쳐 show poor ball shear strength. The decrease of the shear strength was mainly due to the direct contact between solder and nonwettable metal such as Ti and Al resulting in a delamination. In this case thin 1$\mu$m Cu and 0.2$\mu$m Pd diffusion barrier layer were completely consumed by Cu-Sn and pd-Sn reaction.