• Journal of Advanced Marine Engineering and Technology
• /
• 제22권2호
• /
• pp.219-224
• /
• 1998

Recently to achieve the anti-corrossive effect in propeller shafts the coating technique with suit-able coating materials is available instead of bronze-sleeved shafts. In this case the coating mate-rials in service must not be delaminated from the shaft and the crack must not be originated. Thus the various performance and security test for coating materials of propeller shaft must be carried out under the real conditions or more severe circumstance. The most important factors effecting on the funtion of coating materials in propeller shaft are the strain and the environment of sea water. In this paper therefore the maximum possible strain which can be occured in real propeller shaft was calculated based on IACA standard classification rule in order to give the proper level of strain to the test samples in performance test of propeller shaft coating materials.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 추계학술대회논문집
• /
• pp.77-83
• /
• 2009

In this study, we conducted resistance and propulsion performance test of ship composed of the Resistance Test, Propeller Open Water Test and Self Propulsion Test using the CFD(Computational Fluid Dynamics). We used commercial RANS(Reynolds Averaged Navier Stokes equation) solver, as a calculating tool. The unstructured grids were used in a bow and stern of ship, having complex shape, for a convenience of generating grids, and the structured grids were adopted in a central hull and rest of hull having a relatively simple shape which is called hybrid grid method. In addition, The sliding mesh method was adopted to rotate a propeller directly in the Propeller Open Water and Self Propulsion Test. The Resistance Test and Self Propulsion Test were calculated using Volume of Fluid (VOF) model and considering a free surface. And all The three cases were applied realizable k-epsilon model as the turbulence model. The results of calculations were verified for the suitability of calculations by comparing MOERI's EFD results.

• 항공우주시스템공학회지
• /
• 제15권5호
• /
• pp.60-71
• /
• 2021

상용 프로펠러의 추력과 토크를 측정하기 위한 성능시험 장치를 고안하였으며, 30인치급 3가지 프로펠러에 대한 성능시험을 수행하였다. 프로펠러 추력과 토크 측정을 위해 모터, 프로펠러와 연결된 6분력 발란스를 적용하였으며, 풍동 저울 교정 장비를 이용하여 측정 시스템의 확인을 수행하였으며, QTP 프로펠러를 적용하여 구축한 성능시험 장치의 검증 시험도 수행하였다. 제자리 비행 조건에서 상용 프로펠러의 제작사에서 제공하는 사양과 시험 결과를 비교하였으며, 추력 및 토크에서 차이가 있음을 확인하였다. 받음각, 프로펠러 형상, 풍속을 변경시켜가며 프로펠러 성능을 측정하였으며, 각 프로펠러에 대해 RPM에 따른 프로펠러 추력 계수로 나타내었다. 저 받음각과 고 받음각에서 경향이 다르게 나타남을 확인하였으며, 차후 공중용 무인이동체 공력 설계에 활용 가능한 공력 데이터베이스를 확보하였다.

• 한국해양공학회지
• /
• 제21권3호
• /
• pp.40-45
• /
• 2007

This study was performed to investigate the effect of various propeller tunnel shapes on the propulsion performance of a fishing boat. The propeller tunnel reduces the problem resulting from the open propeller accidentally catching the waste net and cable on the sea, as well as increasing the cruising speed. For 3 different tunnel geometries, the model test is conducted in the circular water channel, and the potential based panel method was applied to analyze the hydrodynamic characteristics of propeller. Also, both results are compared with each other to represent the difference between results of the model scale test and the potential theory. It is expected that these results could be referenced in the design of the propeller tunnel in consideration of the hydrodynamic interaction between the propeller and the tunnel.

• 항공우주시스템공학회지
• /
• 제12권4호
• /
• pp.26-34
• /
• 2018

이륙 중량 25 kg급 멀티콥터용으로 개발된 프로펠러에 대해 정적 구조 시험 및 성능 시험을 통해 설계 요구도 충족 여부를 판별하기 위한 시험 평가를 수행하였다. 정적 구조 시험에서는 극한 하중 및 요구도 하중 부가 후 시편 파손이 발생하지 않음으로써 프로펠러 구조 강도에 대한 안전 여유 3 이상을 갖는 것으로 나타났다. 성능 시험에서는 설계 요구도의 제자리 비행 추력 및 최대 추력을 발생시키고, 운용 추력 영역에서 제자리 비행 성능 효율은 0.73 이상을 나타내었다. 기준 프로펠러와 비교할 때, 성능 효율 최대값은 3% 이상 증가되고, 소비 전력은 운용 영역에서 4% 이상 저감되는 것으로 나타났다. 구조 강도 요구도 및 성능 요구도를 충족시킴으로써 프로펠러는 성공적으로 개발된 것으로 평가되었다.

• 대한조선학회논문집
• /
• 제54권6호
• /
• pp.453-460
• /
• 2017

In order to investigate propulsion efficiency and cavitation characteristics for expanded area ratio variation of the 8800TEU class container propeller, a series of performance tests were conducted at Large Cavitation Tunnel (LCT) and Towing Tank (TT) in KRISO. The cavitation test of the existing propellers (KP1029 & KP1030) was conducted using FRP model ship in LCT. On the basis of LCT test results, it was required to design propeller with better propulsion efficiency and cavitation performance. Two propellers (KP1171 & KP1172) with decreased expanded area ratio were designed on the basis of KP1029 propeller. The new design propellers showed higher efficiency than KP1029 and reasonable cavitation performance. In the future, they will be applied as the standard propeller for the propeller design of the large container ship. Through the performance test and prediction results for the new design propellers, it is thought that high-load propeller with better propulsion efficiency and cavitation performance will be developed constantly.

• 대한조선학회지
• /
• 제22권2호
• /
• pp.35-48
• /
• 1985

The present work develops a method of evaluating thrust deduction and wake for different loads of the propeller using the concerted application of the theoretical tools and experimental techniques. It also shows the applicability of the new method to the design of optimum hull form. Firstly, the problem of hull-propeller interaction was analyzed in terms of inviscid as well as viscous components of the thrust deduction and wake. The wavemaking resistance of a hull and propeller were mathematically represented by sources on the hull surface and sink on the propeller plane, respectively. The strength of sink was determined by utilizing the radial distributions of propeller load and nominal wake. The resistance increment due to a propeller and the axial perturbation flow induced by the hull in the propeller plane were calculated. Especially, the inviscid component of the thrust deduction was calculated by subtraction the wavemaking resistance of a bare hull, the wavemaking resistance of a free-running propeller and the augmentation of propeller resistance due to hull action from the wavemaking resistance of the hull with a propeller. The viscous components of the thrust deduction and wake were estimated as functions of propeller load which were established by the propeller load varying test after deduction the calculated inviscid components. Secondly, an analysis method of powering performance was developed based on the potential theory and the propeller load varying test. The hybrid method estimates the thrust deduction, wake and propeller open-water efficiency for different propeller load. This method can be utilized in the analysis of powering performance for the propeller load variation such as the added resistance due to hull surface roughness, the added resistance due to wind, etc. Finally, the hybrid method was applied to the optimum design of hull form. A series of afterbody shapes was obtained by systematically varying the waterplane and section shapes of a parent afterbody without changing the principal dimensions, block coefficient and prismatic coefficient. From the comparison of the predicted results such as wavemaking resistance, thrust deduction, wake and delivered power, an optimum hull form was obtained. The delivered power of the optimized hull form was reduced by 5.7% which was confirmed by model tests. Also the predicted delivered power by the hybrid method shows fairly good agreement with the test result. It is therefore considered that the new analysis method of powering performance can be utilized as a practical tool for the design of optimum hull form as for the analysis of powering performance for the propeller load variation in the preliminary design stage.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.560-562
• /
• 2017

본 논문에서는 최근 택배 유인드론의 개발 등 높은 유상하중을 요구하는 임무를 수행하기 위해 드론에 적용되고 있는 동축반전 프로펠러의 제자리 비행성능을 확인하기 위한 시험 장치 개발과 시험 결과를 제시하였다. 프로펠러 직경 대비 상/하 프로펠러 간격에 따른 각 추력과 토크의 변화를 측정하여 성능을 비교하였다. 프로펠러가 회전할 때 발생하는 추력, 토크를 측정하기 위해 로드셀과 토크셀을 이용하였고 회전수를 측정하기 위해서 광센서를 이용하였다. 각 센서의 신호획득을 위해 자료획득시스템(Data Acquisition System)을 이용하고 신호 저장, 모니터링과 BLDC 모터를 제어할 수 있도록 LabVIEW소프트웨어를 활용하였다. 시험은 각 프로펠러가 동일 회전수에서 간격 변화에 따른 성능지수(Figure of Merit)를 측정하였다.

• 한국전산유체공학회지
• /
• 제15권1호
• /
• pp.81-87
• /
• 2010

In this study, we conducted resistance and propulsion performance test of ship composed of the Resistance Test, Propeller Open Water Test and Self Propulsion Test using the CFD(Computational Fluid Dynamics). We used commercial RANS(Reynolds Averaged Navier Stokes equation) solver, as a calculating tool. The unstructured grids were used in a bow and stern of ship, having complex shape, for a convenience of generating grids, and the structured grids were adopted in a central hull and rest of hull having a relatively simple shape which is called hybrid grid method. In addition, The sliding mesh method was adopted to rotate a propeller directly in the Propeller Open Water and Self Propulsion Test. The Resistance Test and Self Propulsion Test were calculated using Volume of Fluid (VOF) model and considering a free surface. And all The three cases were applied realizable k-epsilon model as the turbulence model. The results of calculations were verified for the suitability of calculations by comparing MOERI's EFD results.

• 대한조선학회논문집
• /
• 제54권3호
• /
• pp.215-226
• /
• 2017

This paper presents numerical results of the performance of a marin propeller in cavitating and non-cavitating flow conditions. The geometry and experimental validation data of the propeller are provided in Potsdam Propeller Test Case(PPTC) in the framework of the second International Symposium on Marine Propulsors 2011(SMP'11) workshop. The PPTC includes open water tests, velocity field measurements and cavitation tests. The present numerical analysis was carried out by using the Reynolds averaged Navier-Stokes(RANS) method on a wall-resolved grid ensuring a y+=1, where the SST k-${\omega}$ model was mainly used for turbulence closure. The influence of the turbulence model was investigated in the prediction of the wake field under a non-cavitating flow condition. The propeller tip vortex flows in both cavitating and non-cavitating conditions were captured through adaptation of additional grids. For the cavitation flows at three operation points, Schnerr-Sauer's cavitation model was used with a Volume-Of Fluid(VOF) approach to capture the two-phase flows. The present numerical results for the propeller wake and cavitation predictions including the open water performance showed a qualitatively reasonable agreement with the model test results.