• Bulletin of the Korean Chemical Society
• /
• 제29권2호
• /
• pp.389-392
• /
• 2008

High purity carbon nano fibers/tubes (CNF/Ts) which contain 97% pure graphitic carbon are prepared by a new catalytic method. These carbon nano fibers/tubes are ready to use without any further purification. The striking feature of this method is the production of carbon nano fibers/tubes of narrow distribution range. The developed catalytic method also produces pure hydrogen. An additional advantage of this catalytic method is that catalyst can be reused without reactivation. Ni:Cu catalyst system is embodied into SCHOTT-DURAN filter disc of large pore size (40-100 mm). Due to the production of hydrogen in the reaction catalyst stability is enhanced and deactivation process is considerably slowed down.

• Carbon letters
• /
• 제1권3_4호
• /
• pp.143-147
• /
• 2001

Under the irradiation of radiofrequency wave, the dipole materials vibrate as microwave phase changes. This causes friction between adjacent molecules and enables an unique characteristics of interior heating of the materials. Using this principle, when harmful material pass through anthracite- bed which play a role as a absorber of radiofrequency wave, the material can be easily decomposed by the microwave energy. To remove benzene vapour and other solvents in the process of industry, we examined decomposition of benzene in this manner. It was found that benzene was decomposed to the methane, ethane, propane and butane, etc. during passing through the carbon-bed under the microwave impingement and distribution of methane in the products reached about 85 vol.%. The decomposition rate of benzene was high within 5 minutes from start of reaction. For a lower concentration of benzene gas, general cases in the field of industry, almost complete decomposition of benzene is believed possible and this method is surely expected to be useful for the prevention of air pollution and improvement of ambient condition.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.392-395
• /
• 2006

In this work, the reinforcing action of carbon blacks in rubber was investigated by SEM and UTM measurements which at low a testing of the surface and mechanical properties. In order to gain an insight into the different properties between carbon blacks before and after methane/propane decomposition, various composites were prepared with SBR synthetic rubber and different carbon blacks with four loading ratios. The results were analyzed with the aim of finding suitable conditions for decomposition reaction to cut down the net cost for hydrogen production through hydrocarbon decomposition.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.569-572
• /
• 2007

천연가스의 주요 구성성분은 메탄, 에탄, 프로판으로 99%이상 차지하고 있으며 천연가스 하이드레이트(NGH)는 압축천연가스(CNG)에 비해 체적당 질량이 크고 액화천연가스(LNG) 보다 상대적으로 유리한 온도 및 압력조건으로 인해 천연가스의 경제적인 저장 및 수송 수단으로 주목 받고 있다. $CH_4$ - $C_2H_6$, $CH_4$ - $C_3H_8$ 혼합가스 하이드레이트의 제조시 반응시간에 따른 하이드레이트의 거동을 관찰하였으며 생성조건의 변화에 따른 하이드레이트의 생성속도를 비교하였다. 하이드레이트의 생성이 진행될 때 기상에서의 $C_2H_6$, $C_3H_8$의 몰 비는 감소함을 보여주었고 이러한 변화는 $CH_4$ - $C_3H_8$가 $CH_4$ - $C_2H_6$보다 더욱 빠르게 진행되었다. 또한 생성된 하이드레이트의 해리과정이 진행될 때 역시 서로 다른 해리속도에 의해 조성의 변화를 관찰 할 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.335-338
• /
• 2001

With the use of the electron microscopy and X-ray phase analysis the regularities of carbon deposit formation in process of methane and propane pyrolysis on the zeolites, Kazakhstan natural clays, chrome and bauxite sludge containing metal oxides of iron subgroup, have been studied. In process of over-carbonization the trivalent iron was reduced to metal form. In addition, the carbon tubes of divers morphology had been impregnated with ultra-dispersed metal particles. The kinetic parameters of carbon formation in process of methane decomposition on the zeolite CoO mixture surface were investigated by method of thermo-gravimetric analysis. The morphology and structure of formed carbon fibrils, with the metal particles fixed at their ends, have been investigated, the formation of branched carbon fibrils pattern, so called octopus, being found.

• Transactions on Electrical and Electronic Materials
• /
• 제2권2호
• /
• pp.5-15
• /
• 2001

The experiment established optimal conditions for over-carbonization. With the use of the electron microscopy and X-ray phase analysis the regularities of carbon deposit formation in process of methane and propane pyrolysis on the zeolites, Kazakhstan natural clays, chrome and bauxite sludge containing metal oxides of iron subgroup, have been studied. In process of over-carbonization the trivalent iron was reduced to metal form. In addition, the carbon tubes of divers morphology had been impregnated with ultra-dispersed metal particles. The kinetic parameters of carbon formation in process of methane decomposition on the zeolite - CoO mixture surface were investigated by method of thermo-gravimetric analysis. The morphology and structure of formed carbon fibrils, with the metal particles fixed at their ends, have been investigated, the formation of branched carbon fibrils pattern, so called octopus, being found. Also, the walnut shells and grape kernel carbonization, their immobilization by the cells of selective absorption of heavy metal and sulfur dioxide ions have been studied. The example of metal-carbon composites used as adsorbents for wastewater purification, C$_3$- C$_4$ hydrocarbon cracking catalysts and refractory materials with improved properties have been considered.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2000년도 제21회 KOSCO SYMPOSIUM 논문집
• /
• pp.33-46
• /
• 2000

In the present study, a systematic chemical kinetic calculations were made to investigate the augmentation of NO-$NO_2$ conversion due to the addition of various hydrocarbons (methane, ethylene, ethane, propene, propane) in the nonthermal plasma treatment. It is included in the present conclusion that the reaction between hydrocarbon and oxygen radicals induced by electron collision, is believed to be a primarily process for triggering the overall NO oxidation and the eventual NOx reduction. Upon the completion of the initiating step, various radicals (OH, $NO_2$ etc.) successively produced by hydrocarbon decomposition form the primary path of NO-$NO_2$ conversion. When the initiating step is not activated, hydrocarbon consumption rate appeared to be very low, thereby the targeted level of NO conversion can only be achieved by the addition of more input energy. Present study showed ethylene and propene to have higher affinity with 0 radical under all conditions, thereby both of these hydrocarbons show very fast and efficient NO-$NO_2$ oxidation. It was also shown that propene is superior to ethylene in the aspect of NOx removal.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2000년도 제20회 KOSCO SYMPOSIUM 논문집
• /
• pp.178-188
• /
• 2000

In the present study, a systematic chemical kinetic calculations were made to investigate the augmentation of $NO-NO_{2}$ conversion due to the addition of various hydrocarbons (methane, ethylene, ethane, propene, propane) in the nonthermal plasma treatment. It is included in the present conclusion that the reaction between hydrocarbon and oxygen radicals induced by electron collision, is believed to be a primarily process for triggering the overall NO oxidation and the eventual NOx reduction. Upon the completion of the initiating step, various radicals (OH, $HO_{2}$ etc.) successively produced by hydrocarbon decomposition form the primary path of $NO-NO_{2}$ conversion. When the initiating step is not activated, hydrocarbon consumption rate appeared to be very low, thereby the targeted level of NO conversion can only be achieved by the addition of more input energy. Present study showed ethylene and propene to have higher affinity with 0 radical under all conditions, thereby both of these hydrocarbons show very fast and efficient $NO-NO_{2}$ oxidation. It was also shown that propene is superior to ethylene in the aspect of NOx removal.

• 한국연소학회지
• /
• 제5권2호
• /
• pp.37-50
• /
• 2000

In the present study, a systematic chemical kinetic calculations were made to investigate the augmentation of $NO-NO_2$ conversion due to the addition of various hydrocarbons (methane, ethylene, ethane, propylene, propane) in the nonthermal plasma treatment. It is included in the present conclusion that the reaction between hydrocarbon and oxygen radicals induced by electron collision, is believed to be a primarily process for triggering the overall NO oxidation and the eventual NOx reduction. Upon the completion of the initiating step, various radicals (OH, $HO_2$ etc.) successively are produced by hydrocarbon decomposition form the primary path of $NO-NO_2$ conversion. When the initiating step is not activated, hydrocarbon consumption rate appeared to be very low, thereby the targeted level of NO conversion can only be achieved by the addition of more input energy. Present study showed ethylene and propylene to have higher affinity with O radical under all conditions, thereby both of these hydrocarbons show very fast and efficient $NO-NO_2$ oxidation. It was also shown that propylene is superior to ethylene in the aspect of NOx removal.

• Macromolecular Research
• /
• 제11권6호
• /
• pp.410-417
• /
• 2003

Poly(methyl methacrylate-co-acrylonitrile) [P(MMA-co-AN)]/Na-MMT nanocomposites were synthesized through emulsion polymerization with pristine Na-MMT. The nanocomposites were exfoliated up to 20 wt% content of pristine Na-MMT relative to the amount of MMA and AN, and exhibited enhanced storage moduli, E', relative to the neat copolymer. The exfoliated morphology of the nanocomposite was confirmed by XRD and TEM. 2-Acryla-mido-2-methyl-1-propane sulfonic acid (AMPS) widened the galleries between the clay layers before polymerization and facilitated the comonomers, penetration into the clay to create the exfoliated nanocomposites. The onset of the thermal decomposition of the nanocomposites shifted to a higher temperature as the clay content increased. By calculating areas of tan$\delta$ of the nanocomposites, we observed that the nanocomposites show more solid-like behavior as the clay content increases. The dynamic storage modulus and complex viscosity increased with clay content. The complex viscosity showed shear-thinning behavior as the clay content increased. The Young's moduli of the nano-composites are higher than that of the neat copolymer and they increase steadily as the silicate content increases, as a result of the exfoliated structure at high clay content.