• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.725-728
• /
• 2004

In this study, the effect of mode II by variation of multilevel loading direction was experimentally investigated in the fatigue crack propagation behavior. To generate mixed-mode I+II loading state, the compact tension shear(CTS) specimen and loading device were used in this tests. The experimental method divided into three steps and three cases that were step I(0$^{\circ}$), step II(30$^{\circ}$, 60$^{\circ}$, 90$^{\circ}$),step III(0$^{\circ}$) and case I(0$^{\circ}$ ⇒ 30$^{\circ}$ ⇒ 0$^{\circ}$), case II(0$^{\circ}$ ⇒ 60$^{\circ}$ ⇒ 0$^{\circ}$), case III(0$^{\circ}$ ⇒ 90$^{\circ}$ ⇒ 0$^{\circ}$). The result of test, the step II affected to the step III in the all case. Specially, The fatigue crack propagation rate was faster and the fatigue life was smaller than of mixed mode I+II(30$^{\circ}$,60$^{\circ}$) due to the effect of mode II in the step III of the case III

• 한국연소학회:학술대회논문집
• /
• 2004.06a
• /
• pp.102-111
• /
• 2004

Partial quenching structure of turbulent diffusion flames in a turbulent mixing layer is investigated by the method of flame hole dynamics to develope a prediction model for the turbulent lift off. The present study is specifically aimed to remedy the problem of the stiff transition of the conditioned partial burning probability across the crossover condition by adopting level-set method which describes propagating or retreating flame front with specified propagation speed. In light of the level-set simulations with two model problems for the propagation speed, the stabilizing conditions for a turbulent lifted flame are suggested. The flame hole dynamics combined with level-set method yields a temporally evolving turbulent extinction process and its partial quenching characteristics is compared with the results of the previous model employing the flame-hole random walk mapping. The probability to encounter reacting' state, conditioned with scalar dissipation rate, demonstrated that the conditional probability has a rather gradual transition across the crossover scalar dissipation rate in contrast to the stiff transition of resulted from the flame-hole random walk mapping and could be attributed to the finite response of the flame edge propagation.

• Korean Journal of Medicinal Crop Science
• /
• v.28 no.5
• /
• pp.354-359
• /
• 2020

Background: The recent, decline in Black-berry Magnolia Vine (Schisandra repanda; BMV) native to Jeju Island, Korea, has raised concerns about the causes of this decline. We investigated the native environment of S. repanda and evaluated its propagation through cuttings to provide preliminary data for its restoration in Jeju Island. Methods and Results: The native environment of the BMV in the Hallasan National Park was surveyed and the climatic variables (temperature and humidity) were analyzed. The effects of the sex of the donor plant (male/female) type of cutting (softwood/hardwood), and treatment with a plant growth regulator (indole-3-butylic acid/rootone) on the rooting of BMV were investigated. Additinallly, the rooting rate, root count, and root length, as well as temperature and humidity were measured in the vinyl moist chambers. BMV was observed in 63 plants distributed from 567 m to 1,364 m above sea level of the Hallasan National Park. In the cutting experiment, the rooting rate was 71.9%, and it was higer in female plants (75.0%) than in male plants (68.8%). Conclusions: The mass propagation of BMV through cuttings valuable for its restoration as without such safeguard measures, the population could face extinction within a few decades.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.473-480
• /
• 1988

In this study, a method that can realize the effect of residual stresses on fatigue crack propagation has been proposed. This method requires that the relaxation quantities of residual stresses are measured by experimental method according to fatigue cycles and are employed to the experimental results of base materials by introducing the concept of superposition. SS41 material has been analyzed as an example. The results show that the relaxation factor of residual stresses for fatigue cycles is .alpha.$_{i}$= 1/0.6903+0.0380 $a_{I}$ the effective stress ratio for fatigue crack propagation length is ( $R_{eff}$)$_{i}$ = 1/1.1274+0.0118$_{I}$ and the fatigue crack propagation rate for relaxation quantities of residual stresses is (da/dN)$_{t}$ = 0.5 $K_{cf}$ - .DELTA.K/{1-1/1.1274+0.0118$_{ai}$ } $K_{cf}$ - .DELTA. K(da/dN), for stress ratio /R=0.5.io /R=0.5.5.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.147-153
• /
• 2000

The fatigue crack propagation behavior of the SA516/70 steel which is used for pressure vessels was examined experimentally at room temperature, $150^{\circ}C$, $250^{\circ}C$ and $370^{\circ}C$ with stress ratio of R=0.1 and 0.3. The fatigue crack propagation rate da/dN related with the stress intensity factor range $\Omega\textrm{K}$ was influenced by the stress ratio within the stable growth of fatigue crack(Region II) with an increase in $\Omega\textrm{K}$. The resistance to the fatigue crack growth at high temperature is higher in comparison with that at room temperature, and the resistance attributed to the extent of plasticity-induced by compressive residual stress according to the cyclic loads. Fractographic examinations reveal that the differences of the fatigue crack growth characteristics between room and high temperatures are mainly explained by the crack closure and oxide-induced by high temperature.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.4
• /
• pp.50-58
• /
• 1999

This study was carried out to investigate the growth characteristics and propagation methods of L. obtusiloba as a woody landscape plant. The results are obtained as follows: L. obtusiloba was dioecious shrub and shaped with bush type. Leaves were ovate, obtuse, cordate, 7.05 cm long, 7.20 cm wide, and petiole 2.0 cm long. Flowers of L. obtusiloba were diclinous. Soil acidity ranged from pH 4.06 to 5.53 with the lowest at the Mt. Soo-Ri. Mt. Soo-Ri located near factory district, which was considered to damaged by environmental deteoration. While soil organic matter was highest at Mt. Soo-Ri, inorganic nutrients were low. L. obtusiloba grows in the area with low soil acidity and low content of inorganic. Therefore it seemed to be tolerant to air pollution. L. Obtusiloba was high seed germination rate in the plug box and its shoots were longer than seeding box and softwood cutting of L. obtusiloba showed the rooting rate of 50% at 5,000ppm on June 23. To develop a mass propagation method of Korean native L. obtusiloba through an axillary bud culture as a woody landscape plant, about 2∼3 cm shoots induced from explant were subcultured to new media contained different growth regulators. Shoots multiplied most effectively on a WPM containing 1.0 mg/l BA, producing 5.5 shoots with a shoot length of 2.5 cm per shoot explant.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.2
• /
• pp.191-204
• /
• 2010

There is a well-defined propagation model, named the random constant spread (RCS) model, which explains worms that spread their clones with a random scanning strategy. This model uses the number of infected hosts in a domain as a factor in the worms' propagation. However, there are difficulties in explaining the characteristics of new Internet worms because they have several considerable new features: the denial of service by network saturation, the utilization of a faster scanning strategy, a smaller size in the worm's propagation packet, and to cause maximum damage before human-mediated responses are possible. Therefore, more effective factors are required instead of the number of infected hosts. In this paper, the network bandwidth usage rate is found to be an effective factor that explains the propagations of the new Internet worms with the random scanning strategy. The analysis and simulation results are presented using this factor. The simulation results show that the scan rate is more sensitive than the propagation packet for detecting worms' propagations.

• Journal of the Korean Society of Combustion
• /
• v.9 no.2
• /
• pp.18-29
• /
• 2004

Partial quenching structure of diffusion flames in a turbulent mixing layer has been investigated by the method of flame hole dynamics in oder to develope a prediction model for the phenomenon of turbulent flame lift off. The present study is specifically aimed to remedy the shortcoming of the stiff transition of the conditioned partial burning probability across the crossover condition by employing the level-set method which enables us to include the effect of finite flame edge propagation speed. In light of the level-set simulation results with two models for the edge propagation speed, the stabilizing conditions for turbulent lifted flame are suggested. The flame hole dynamics combined with the level-set method yields a temporally evolving turbulent extinction process and its partial quenching characteristics is compared with the results of the previous model employing the flame-hole random walk mapping based on three critical scalar dissipation rates. The probability to encounter reacting state, conditioned with scalar dissipation rate, demonstrated that the conditional probability has a rather gradual transition across the crossover scalar dissipation rate. Such a smooth transition is attributed to the finite response of the flame edge propagation.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.2
• /
• pp.105-110
• /
• 2001

The fatigue crack propagation behavior of the SA516/70 steel which is used for pressure vessels was examined experimentally at room temperature, 150$^{\circ}C $, 250$^{\circ}C $ and 370$^{\circ}C $ with stress ratio of R=0.1 and 0.3. The fatigue crack propagation rate da/dN related with the stress intensity factor range $\Delta K$ was influenced by the stress ratio within the stable growth of fatigue crack(Region II) with an increase in $\Delta K$. The resistance to the fatigue crack growth at high temperature is higher in comparison with that at room temperature, and the resistance attributed to the extent of plasticity-induced by compressive residual stress according to the cyclic loads. Fractographic examinations reveal that the differences of the fatigue crack growth characteristics between room and high temperature are mainly explained by the crack closure and oxide-induced by high temperature.

• Journal of Ocean Engineering and Technology
• /
• v.2 no.2
• /
• pp.122-129
• /
• 1988

Recently with the rapid development in marine and shipbuliding industries such as marine structures, ship and chemical plants, there occurs much interest in the study of corrosion fatigue characteristics which was closed up an important role in mechanical design. In this study, the 5086 Al-alloy was tested by use of rotary bending fatigue tester. The retardation effect of overload on the corrosion fatigue crack propagation in sea environment was quantitatively studied. 1) Retardation effect of corrosion fatigue crack propagation is most eminent when overload ratio is 1.52, overload magnitude corresponds to about 77% and 55% of yield strength and tensile strength respectively. 2) After overload ratio 1.52 was used, retardation of corrosion fatigue crack growth rate is largely retarded and quasi-threshold stress intensity factor range($\Delta\textrm{K}_{th}$) appears. 3) According to m of experimental constant, retardation effect of corrosion fatigue crack propagation corresponds to about 25% of constant stress amplitude when overload ratio is 1.52. 4) When overload ratio 1.52 was used, retardation parameter (RP) decreases to about 0.43 and corrosion sensitivity (S)decreses to about 2.1.