• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2018년도 추계학술발표대회
• /
• pp.276-278
• /
• 2018

급격한 전파를 이용하는 기기의 다양화와 대중화로 인해 많은 전파 관련 보안 문제들이 일어나고 있다. 전파와 생활에서의 안전은 매우 밀접한데 전파의 방해와 교란은 단순 생활의 불편뿐 아니라 신체의 직접적인 피해를 입힐 수도 있기 때문에 전파보호는 매우 중요한 과제이다. 본 내용에서는 그 대안으로 본문의 전파 교란과 교섭을 막기 위한 방안으로 생체정보인 지문을 이용한 암호화된 토큰을만들어 토큰링을 통한 정보의 수신여부를 결정 하여 인증 강도, 호출자의 정보 등이 포함된 동적 보안 속성을 가진 수평 전파를 전송하고 java직렬화와 직렬화 해제 기능을 이용하여 토큰의 고유성을 확인수평전파를 송 수신 하여 해당 문제점을 해결 하고자 제안하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.790-795
• /
• 2004

The characteristics of refrigerator noise recorded in anechoic chamber was investigated in condition of a the real living room and a kitchen. To predict the noise propagation in an apartment unit, room acoustic simulation software was used. It was found that the noise level in the real living room was $4\sim8dB$ higher than in the anechoic chamber. When a noise barrier and absorption materials were used on the rear wall and floor, the noise level reduced up to $3\sim4dB$. In addition, when the subjective evaluation of auralized refrigerator noise was undertaken using headphone, it was revealed that 21dB (A) is the allowable sound pressure level of 95% satisfaction.

• Structural Engineering and Mechanics
• /
• 제56권2호
• /
• pp.189-200
• /
• 2015

The topic of this study is to investigate behaviors of masonry walls strengthened with reinforced fiber plaster under diagonal tensile loads. Full blend brick $100{\times}50{\times}30mm$ in dimensions were used to make masonry walls with dimensions of $400{\times}400{\times}100mm$. Three different samples were manufactured by plastering masonry walls with traditional style, with 3% polypropylene or with 5% steel fiber. All the samples were tested using ASTM 1391-81 standards. The propagation of damage on samples caused by diagonal tensile load was observed and load-displacement graphs were plotted for each sample. A finite element software (ABAQUS) was used to obtain numerical values for all samples and crack patterns and load-displacement responses were obtained. Experimental and numerical results were compared.

• Computers and Concrete
• /
• 제17권6호
• /
• pp.831-848
• /
• 2016

This study aims to characterize the multiple cracking behavior of HTPP-ECC (High tenacity polypropylene fiber reinforced engineered cementitious composites) by Digital Image Correlation (DIC) Method. Digital images have been captured from a dogbone shaped HTPP-ECC specimen exhibiting 3.1% tensile ductility under loading. Images analyzed by VIC-2D software and ${\varepsilon}_{xx}$ strain maps have been obtained. Crack widths were computed from the ${\varepsilon}_{xx}$ strain maps and crack width distributions were determined throughout the specimen. The strain values from real LVDTs were also compared with virtual LVDTs digitally attached on digital images. Results confirmed that it is possible to accurately monitor the initiation and propagation of any single crack or multiple cracks by DIC at the whole interval of testing. Although the analysis require some post-processing operations, DIC based crack analysis methodology can be used as a promising and versatile tool for quality control of HTPP-ECC and other strain hardening composites.

• 전기전자학회논문지
• /
• 제23권1호
• /
• pp.314-317
• /
• 2019

Recently, the symmetric superposition coding (SSC) [3] is proposed for a solution for the error propagation (EP) due to the non-perfect successive interference cancelation (SIC) in non-orthogonal multiple access (NOMA). We analyze the performance of NOMA with the SSC. It is shown that the performance of the SSC NOMA is the same as that of NOMA with the normal superposition coding (NSC) for the power allocation factor less than 20%, the SSC NOMA performance is better than the NSC NOMA performance up to the power allocation factor 80%, and the SSC NOMA performs worse than the NSC NOMA for the power allocation factor greater than 80%. As a result, the SSC should be used with consideration of the power allocation.

• ETRI Journal
• /
• 제42권6호
• /
• pp.965-975
• /
• 2020

This paper proposes a new framework for the development and deployment of honeypots for evolving malware threats. As new technological concepts appear and evolve, attack surfaces are exploited. Internet of things significantly increases the attack surface available to malware developers. Previously independent devices are becoming accessible through new hardware and software attack vectors, and the existing taxonomies governing the development and deployment of honeypots are inadequate for evolving malicious programs and their variants. Malware-propagation and compromise methods are highly automated and repetitious. These automated and repetitive characteristics can be exploited by using embedded reinforcement learning within a honeypot. A honeypot for automated and repetitive malware (HARM) can be adaptive so that the best responses may be learnt during its interaction with attack sequences. HARM deployments can be agile through periodic policy evaluation to optimize redeployment. The necessary enhancements for adaptive, agile honeypots require a new development and deployment framework.

• Current Optics and Photonics
• /
• 제6권5호
• /
• pp.473-478
• /
• 2022

To overcome the capture-range problem in phase-diversity phase retrieval (PDPR), a geometrical-optics initial-estimate method is proposed to avoid a local minimum and to improve the accuracy of laser-wavefront measurement. We calculate the low-order aberrations through the geometrical-optics model, which is based on the two spot images in the propagation path of the laser, and provide it as a starting guess for the PDPR algorithm. Simulations show that this improves the accuracy of wavefront recovery by 62.17% compared to other initial values, and the iteration time with our method is reduced by 28.96%. That is, this approach can solve the capture-range problem.

• International journal of advanced smart convergence
• /
• 제12권3호
• /
• pp.19-24
• /
• 2023

Recently, fifth generation (5G) networks are being deployed in phases all over the world, the paradigm has shifted to developing the next generation wireless technologies, which have grown exponentially in last few decades, wireless networks are promising for the demand to enormous connections. Non-orthogonal multiple access (NOMA) and intelligent reflecting surface (IRS) are considered as the key technoloies for next-generation beyond 5G (B5G) and sixth generation (6G) networks, in which IRS can play an important advance in the wireless propagation environment, and NOMA can effectively increase massive connectivity to improve user fairness. In this paper, we analyze a performance on the strongest channel user in terms of achievable data rates numerically. Then, with the achievable data rates, the signal-to-noise ratio (SNR) gain is calculated for the IRS-NOMA network over the conventional NOMA network. As a consequence, IRS-NOMA schemes have been considered as some key technologies.

• Computers and Concrete
• /
• 제32권2호
• /
• pp.165-172
• /
• 2023

The vibration analysis of armchair, zigzag and chiral double-walled carbon nanotubes has been developed by inserting the nonlocal theory of elasticity into thin shell theory. First Donnell shell theory is employed while exercising wave propagation approach. Scale effects are realized by using different values of nonlocal parameters under certain boundary conditions. The natural frequencies have been investigated and displayed for various non-local parameters. It is noticed that on increasing nonlocal parameter, the frequency curve tends to decrease. The frequency estimates of clamped-free boundary condition are less than those of clamped-clamped and simply supported computations. The frequency comparisons are presented for armchair, zigzag and chiral nanotubes. The software MATLAB is used to extract the frequencies of double walled carbon nanotubes.

• 한국도로학회논문집
• /
• 제8권1호
• /
• pp.139-152
• /
• 2006

Many experimental and numerical approaches have been developed to evaluate paving materials and to predict pavement response and distress. Micromechanical simulation modeling is a technology that can reduce the number of physical tests required in material formulation and design and that can provide more details, e.g., the internal stress and strain state, and energy evolution and dissipation in simulated specimens with realistic microstructural features. A clustered distinct element modeling (DEM) approach was implemented In the two-dimensional particle flow software package (PFC-2D) to study the complex behavior observed in asphalt mixture fracturing. The relationship between continuous and discontinuous material properties was defined based on the potential energy approach. The theoretical relationship was validated with the uniform axial compression and cantilever beam model using two-dimensional plane strain and plane stress models. A bilinear cohesive displacement-softening model was implemented as an intrinsic interface and applied for both homogeneous and heterogeneous fracture modeling in order to simulate behavior in the fracture process zone and to simulate crack propagation. A disk-shaped compact tension test (DC(T)) with heterogeneous microstructure was simulated and compared with the experimental fracture test results to study Mode I fracture. The realistic arbitrary crack propagation including crack deflection, microcracking, crack face sliding, crack branching, and crack tip blunting could be represented in the fracture models. This micromechanical modeling approach represents the early developmental stages towards a 'virtual asphalt laboratory,' where simulations of laboratory tests and eventually field response and distress predictions can be made to enhance our understanding of pavement distress mechanisms, such its thermal fracture, reflective cracking, and fatigue crack growth.