• 한국해양공학회지
• /
• 제24권4호
• /
• pp.32-37
• /
• 2010

This study presents the attenuation characteristics of the first guided longitudinal wave mode propagating in water-filled, buried steel pipes in order to investigate the effects of soil saturation and compaction on the attenuation patterns. For numerical calculation of attenuation, 10 different combinations of S-wave velocity, P-wave velocity, and soil densities were considered. From the attenuation dispersion curves, which were obtained using Disperse software, we determined that the attenuation decreases as saturation increases, whereas it increases as compaction increases. Over the frequency range from 0.2 to 0.4 MHz, the first longitudinal wave mode has attenuations that are relatively lower than for other ranges, is faster than the first flexural wave mode, and is sensitive to defects aligned in the axial direction. Hence, the first longitudinal wave mode over the mentioned frequency range would be the proper choice for long-range buried pipelines that transport water.

• 한국터널지하공간학회 논문집
• /
• 제6권2호
• /
• pp.129-139
• /
• 2004

터널의 환기설계에 관련하여 종류식과 횡류식의 환기용량의 산정을 위해서 필요한 제반 가정들을 검토하였고, 종류식 설계에서의 최종 값인 임계유속 산정을 위한 몇 가지의 공식을 분석하였다. 이를 토대로 특정 공식을 개선하기 위한 방안을 실험결과를 토대로 제시하였다. 횡류식 설계에서 국제적으로 사용되고 있는 용량산정에 관한 지침은 화재공학적 의미가 전혀 없으며 관행적으로 적용되어 온 것임을 알 수 있었다. 뿐만 아니라 기존의 횡류식 환기설계에는 설계개념조차 명확하지 않음을 입증하였다. 즉 횡류식 시스템에서는 종류식에서의 "연기의 역류 방지를 위한 최소 유속의 유지"라는 개념조차 없이 환기용량이 결정되어 왔으며, 이것은 터널의 화재환기가 오염물질의 환기로부터 시작되어 정확한 화재공학적 분석이 결여되었기 때문이다. 이러한 문제를 해결하기 위한 시도로 횡류식 환기의 설계개념으로서 연기전파거리와 연기축적을 제안하였다. 축소모델 터널을 이용하여 연기전파거리에 관한 실험결과를 제시하였고, 이를 이용하여 기존의 관행대로 설계된 유럽의 터널들에 적용하였을 때 안전성에 문제가 있음을 보였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1998년도 제17회 KOSCI SYMPOSIUM 논문집
• /
• pp.139-154
• /
• 1998

Under certain circumstance, premixed turbulent flame can be treated as wrinkled thin laminar flame and its motion in a hydrodynamic flow field has been investigated by employing G-equation. Past studies on G-equation successfully described certain aspects of laminar flame propagation such as effects of stretch on flame speed. In those studies, flames were regarded as a passive interface that does not influence the flow field. The experimental evidences, however, indicate that flow field can be significantly modified by the propagation of flames through the volume expansion of burned gas. In the present study, a new method to be used with G -equation is described to include the effect of volume expansion in the flame dynamics. The effect of volume expansion on the flow field is approximated by Biot-Savart law. The newly developed model is validated by comparison with existing analytical solutions of G -equation to predict flames propagating in hydrodynamic flow field without volume expansion. To further investigate the influence of volume expansion, present method was applied to initially wrinkled or planar flame propagating in an imposed velocity field and the average flame speed was evaluated from the ratio of flame surface area and projected area of unburned stream channel. It was observed that the initial wrinkling of flame cannot sustain itself without velocity disturbance and wrinkled structure decays into planar flame as the flame propagates. The rate of decay of the structure increased with volume expansion. The asymptotic change in the average burning speed occurs only with disturbed velocity field. Because volume expansion acts directly on the velocity field, the average burning speed is affected at all time when its effect is included. With relatively small temperature ratio of 3, the average flame speed increased 10%. The combined effect of volume expansion and flame stretch is also considered and the result implied that the effect of stretch is independent of volume release.

• Ecology and Resilient Infrastructure
• /
• 제9권3호
• /
• pp.154-162
• /
• 2022

지상표정점을 이용하지 않고도 동영상에 기록된 위치정보 (GPS 자료)만을 이용하여 드론으로 촬영한 동영상에서 절대위치의 유속을 산정할 수 있는 방법을 개발하였다. 이 방법은 드론 동영상에서 있는 GPS 정보를 이용하여 드론의 이동방향과 영상이 향하는 방향을 결정하고, 각 영상점을 물리적인 전역좌표계 (UTM 좌표계)로 변환하였다. 그 다음 시작프레임과 종료프레임을 지정하여 분석할 동영상의 범위를 결정하였다. 지정된 두 프레임의 정보를 이용하여 측정횡단면을 일정간격의 기준프레임 (측정소단면)으로 나누었다. 그리고, 각 측정소단면에서 1초간 영상 (30 프레임)을 모아서 시공간체적을 구성한 뒤 유속을 분석한다. 이렇게 개발된 방법을 기존의 정지비행드론을 이용한 동영상분석법과 비교한 결과 상당히 양호한 결과를 보였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
• /
• pp.221-228
• /
• 2005

The tribrachial flame in laminar coflow jet has been investigated experimentally with unsteady propagating condition. In this experiment, we found that the tribrachial point has an angle of flame surface because the location of tribrachial point is not on the base point of flame but on the inclined surface of flame. This angle of Flame surface at tribrachial point are increasing when the flame is approaching to the nozzle exit. With considering this angle of flame surface, the radial velocity gradient can affect flame propagation speed by increasing flow-stretch effect. The propagation speed of tribrachial flame was calculated with including above stretch effect. The speed decreases with increasing velocity gradient due to the increment of stretch effect.

• 대한기계학회논문집A
• /
• 제20권12호
• /
• pp.3828-3837
• /
• 1996

The dynamic problems of interface crack propagated with constant velocity along the interface of bimateraial composed of isotropic and orthotropicmaterial under antiplane loading condition are studied in this paper. The general dynamic stress fields and displacement fields of mode III are derived when interface crack between isotropic and orthotropic material is propagating with constant velocity. The general dynamic stress fields and displacement fields in isotropic material. Finally, the characteristics of interface crack propagation are studied with various properties of isotropic and orthotropic material and crack propagarion velocities.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.165-168
• /
• 2015

To measure laminar burning velocity in methane/air/ethylene mixture flame, propagating centrally ignited spherical premixed flame to radial direction was measured by high-speed schlieren images with elevated pressure. In this study, The experimentally measured unstretched laminar burning velocities of methane was compared with GRI mech 3.0 to validate experimental data and choose the radius range, respectively. numerical prediction using the PREMIX code with GRI mech 3.0, USC mech II,, and Wang mech were evaluated through comparison with experimental burning velocity with consideration of extrapolation on linear/nonlinear model.

• Journal of Mechanical Science and Technology
• /
• 제16권12호
• /
• pp.1710-1718
• /
• 2002

The effect of fuel concentration gradient on the propagation characteristics of tribrachial (or triple) flames has been investigated experimentally in both two-dimensional and axisymmetric counterflows. The gradient at the stoichiometric location was controlled by the equivalence ratios at the two nozzles; one of which is maintained rich, while the other lean. Results show that the displacement speed of tribrachial flames in the two-dimensional counterflow decreases with fuel concentration gradient and has much larger speed than the maximum speed predicted previously in two-dimensional mixing layers. From an analogy with premixed flame propagation, this excessively large displacement speed can be attributed to the flame propagation with respect to burnt gas. Corresponding maximum speed in the limit of small mixture fraction gradient was estimated and the curvefit of the experimental data substantiates this limiting speed. As mixture fraction gradient approaches zero, a transition occurs, such that the propagation speed of tribrachial flame approaches stoichiometric laminar burning velocity with respect to burnt gas. Similar results have been obtained for tribrachial flames propagating in axisymmetric counterflow.

• 한국전기전자재료학회논문지
• /
• 제15권3호
• /
• pp.275-280
• /
• 2002

The peculiarities of using Self-propagating High-temperature Synthesis (SHS) and solid-stave chase synthesis for production of high temperature superconductor materials were discussed. Oxide superconductors with general formula of $ReBa_2Cu_3O_{7-x}$ (Re=Y, Sm) haute been made by using barium oxide initial powder instead of traditional barium carbonate. Phenomena observed during the grinding of the reactants mixture are presented. Mechano-chemical activation - as a pre-treatment of the reactants mixture - strongly influences the kinetic parameters, the reaction mechanism, and the composition and structure of the final product.

• 한국세라믹학회지
• /
• 제33권1호
• /
• pp.41-48
• /
• 1996

Self-propagating High-temperature Synthesis of Ti+N system has been investigated using the cylindrical high pressure reactor. The nitrogen pressure was varied from 40 to 80 atmosphere and TiNx(x=0.55) powder produced by SHS process was used as a diluent in order to control the reaction. Both the velocity of surface reaction and the ratio of TiN synthesis increased with increasing the nitrogen pressure. As the amount of diluent increases the degree of conversion to titanium nitride increases. Homogenious TiN powder was obtained in the composition 50Ti+50TiN0.94(diluent)