• Title/Summary/Keyword: Proof Test

Search Result 280, Processing Time 0.027 seconds

Design and evaluation of the thermal capability to secure a working time of cryogenic explosion-proof camera in LNG carrier tank

  • Kang, Geun-Il;Kwak, Si-Young;Park, Chun-Seong
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • v.9 no.5
    • /
    • pp.568-576
    • /
    • 2017
  • With an increase in the usage of LNG, there is a heightened interest about its safety aspects regarding the explosion of LNG carrier tank. The need for a cryogenic explosion-proof camera has increased. The camera has to work in cryogenic environment (below $-160^{\circ}C$) in LNG carrier. This study conducted design and heat transfer analysis of cryogenic camera to secure working time in limitation of heat source. The design with gap width of double pane windows was conducted based on simple vertical cavity model to insulate from cryogenic environment. The optimal gap width was 12.5 mm. For effective analysis considering convection within the camera, equivalent thermal conductivity method was adopted with ABAQUS. The working time of the camera predicted was over 10 h at warm-start condition. In cold-start condition, it required about 5 h of pre-warming time to work. The results of analysis were compared with the ones of the actual cryogenic test.

The solution for preventing the expansion of cable joint caused by methane($CH_4$) gas to Water proof type of power cable (도체 수밀형 전력케이블의 가교잔사 가스에 의한 직선접속재 부풀음 현상 방지 대책)

  • Kim, Jong-Won;Lee, Ki-Soo;Paek, Heum-Soo;Choi, Bong-Nam;Park, Hee-Cheol
    • Proceedings of the KIEE Conference
    • /
    • 2000.07c
    • /
    • pp.2020-2022
    • /
    • 2000
  • The cross-linked polyethylene(herein after XLPE) insulated power cable emit the methane($CH_4$)gas in the course of chemical cross-linking process. The general stranded conductor easily discharge this methane gas through the gap of each stranded wires. But the special stranded conductor that filled with semi-conducting rubber compound to prevent water penetration which is applied to water proof type of cable(22.9kV CN/CV-W), disturb the methane gas emission. The pre-mold type cable joint shall be expanded gradually by emit of gas left in XLPE insulation. For example, sometimes the corona problem outbreak on a new power distribution line, resulted from the gap between the sleeve and semi-conductive layer of cable joint. If above mentioned problem especially happened on the way of operating. We have to shut down the line and try to discharge the methane gas in cable joint. In this point, we would like to explain the mechanism of methane gas & cable joint and our test result briefly. At last, we are pleased to introduce the solution for preventing reoccurrence of this problem.

  • PDF

A Study on the Manufacture of Optical Filters for PDP Panel in Conductive Types (PDP 패널용 전도막 광학 필터 제조에 관한 연구)

  • Kim, Tae-Hoon;Kang, Bong-Gu;Lee, Tae-Hoon;Son, Se-Mo
    • Journal of the Korean Graphic Arts Communication Society
    • /
    • v.26 no.2
    • /
    • pp.31-43
    • /
    • 2008
  • The functional dyes, which has various optical characteristics that can be applicable to field of electronic, photo electronic, such as sensor or electrode, were synthesized. Physical property and optical stability was studied with preparation of conductive type film as a kind of optical filter of plasma display panel, by adapting neon cut off dye, which can selectively absorbing between 580 and 610nm wavelength. The filter was prepared with PSA resin, which has functional group of - COOH and - OH, as binder. And the characters such as spectroscopy, heat-proof / wet-proof, thermal stability and commerciality, which must be held by functional dyes, were examined. Conductive type film is the kind of film includes only neon cut off dyes. For the neon cut off dyes, cyanine dyes can be applied. And it is observed that spectrum of before and after the durability test are not changed due to stability of dyes, as the result of coating on the mesh film with PSA binder.

  • PDF

Improvement of Consensus Quality for PoN Blockchain System Using Response Surface Methodology (반응표면분석을 이용한 PoN 블록체인 시스템 합의품질 개선)

  • Choi, Jin Young;Kim, Young Chang;Oh, Jintae;Kim, Kiyoung
    • Journal of Korean Society for Quality Management
    • /
    • v.49 no.4
    • /
    • pp.527-537
    • /
    • 2021
  • Purpose: The purpose of this study was to suggest an improved version of Proof-of-Nonce (PoN) algorithm, which is a distributed consensus algorithm used for block chain system. Methods: First, we used response surface method for design of experiment that is to generate experimental points considering non-linear relationship among variables. Then, we employed overlapped contour plots for visualizing the impact of control variables to performance target. Results: First, we modified the consensus procedure of the existing PoN algorithm by diminishing the content of the exchanged message. Then, we verified the performance improvement of the new PoN algorithm by performing a numerical experiment and paired t-test. Finally, we established new regression models for consensus time and Transactions per second (TPS) and proposed a method for optimizing control variables for obtaining performance target. Conclusion: We could improve the performance of the previous version of PoN algorithm by modifying the content of the exchanged message during 4-steps of consensus procedure, which might be a stepping stone for designing an efficient and effective consensus algorithm for blockchain system with dynamic operation environment.

A Study on Seeking an Alternative Approach to the Remedy for Breach of the Duty of Disclosure in English Marine Insurance Law (영국 해상보험법에서 고지의무 위반에 대한 구제의 대안에 관한 연구)

  • Shin, Gun-Hoon
    • THE INTERNATIONAL COMMERCE & LAW REVIEW
    • /
    • v.24
    • /
    • pp.25-49
    • /
    • 2004
  • English contract law has traditionally taken the view that it is not the duty of the parties to a contract to give information voluntarily to each other. In English law, one of the principal distinctions between insurance contract law and general contract law is the existence of the duty of disclosure in insurance law. This article is, therefore, designed to analyse the scope or extent of the duty of disclosure and the remedy for breach of the duty in English marine insurance law. The main purpose of this article is also to seek the alternative remedy for the breach. The results of analysis are as following : First, the scope of the duty of disclosure is closely related to the test of materiality and the concept of a hypothetical prudent insurer. The assured is required to disclose only material circumstances subject to MIA 1906, s. 18(1). The test of materiality, which had caused a great deal of debate in English courts over 30 years, was finally settled by the House of Lords in Pan Atlantic and the House of Lords rejected the 'decisive influence' test and the 'increased risk' test, and the decision of the House of Lords is thought to accept the 'mere influence' test in subsequent case by the Court of Appeal. Secondly, an actual insurer is, in order to avoid contract, required to provide proof that he is induced to enter into the contract by reason of the non-disclosure of the assured. But this subjective test of actual inducement is somewhat meaningless in sense that English court takes the test of materiality as a starting point and assumes the presumption of inducement even in case of no clear proof on the inducement. Finally, MIA 1906, s. 18 provides expressly for the remedy of avoidance of the contract for breach of the duty of disclosure. This means rescission or retrospective avoidance of the entire contract, and the remedy is based upon a fairly crude 'all-or-nothing' approach. The remedy of rescission is too draconian from the point of view of the assured, because he can be deprived of all cover despite he is innocent perfectly. An inadvertent breach from an innocent mistake is as fatal as wilful concealment. What is, therefore, needed in English marine insurance law with respect to remedy for the breach is to introduce a more sophisticated or proportionate remedy ascertaining degrees of fault.

  • PDF

A Study on plastic Toe-Cap for safety shoes (안전화 경량화를 위한 플라스틱 Toe-Cap에 관한 연구)

  • Cho, K.S.;Kang, T.H.;Kim, I.K.;Kim, Y.S.
    • Proceedings of the KSME Conference
    • /
    • 2004.11a
    • /
    • pp.1007-1011
    • /
    • 2004
  • Safety-Shoes are developed for heavy industry. Nowadays with the development of industry, it is increase on all of industry field. Safety-Shoes are to be classified into using intention. And it's developed not only protect from danger but also more comfort wearing. When wear a safety shoes, in cold weather, serious disease could be occur such as frostbitten and so on. In the study replaces steel toe-cap by polymer. Moreover add keeping warm, light weighting, chemical-proof. So we develop plastic Toe-Cap using plastic technology. And result of material property tess considered plastic to be using light work Safety Shoes Toe-Cap.

  • PDF

A Rao-Robson Chi-Square Test for Multivariate Normality Based on the Mahalanobis Distances

  • Park, Cheolyong
    • Communications for Statistical Applications and Methods
    • /
    • v.7 no.2
    • /
    • pp.385-392
    • /
    • 2000
  • Many tests for multivariate normality are based on the spherical coordinates of the scaled residuals of multivariate observations. Moore and Stubblebine's (1981) Pearson chi-square test is based on the radii of the scaled residuals, or equivalently the sample Mahalanobis distances of the observations from the sample mean vector. The chi-square statistic does not have a limiting chi-square distribution since the unknown parameters are estimated from ungrouped data. We will derive a simple closed form of the Rao-Robson chi-square test statistic and provide a self-contained proof that it has a limiting chi-square distribution. We then provide an illustrative example of application to a real data with a simulation study to show the accuracy in finite sample of the limiting distribution.

  • PDF

Analysis of arc-energy with joint box type through a field test (인공지락 실증시험을 통한 접속함 종류별 아크에너지 해석)

  • Kang, J.W.;Jang, T.I.;Hong, D.S.;Lee, D.I.;Kim, H.D.;Oh, C.H.;Lim, H.E.
    • Proceedings of the KIEE Conference
    • /
    • 2005.07a
    • /
    • pp.715-717
    • /
    • 2005
  • This paper analyses the arc-energy with joint box type through a field test on underground power OF cable. In order to obtain the data, the actual proof test using short-circuit generation for real scale power transmission tunnel carried out. This paper is expected to contribute the fire accident prevention on underground power cable systems and the believability improvement of electric power facilities.

  • PDF

Analysis and Countermeasure for Shock-proof Performance of Laptop Computers (노트북 컴퓨터의 충격성능 분석 및 대책)

  • 임경화;윤영한;안채헌;김진규;이승은
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2001.05a
    • /
    • pp.490-495
    • /
    • 2001
  • This paper deals with an analysis and countermeasure for improving the shock performance of laptop computers. The shock analysis is carried out by using the commercial program of LS-DYNA3D. Also the analysis is verified by the measurements from modal tests and shock tests. The available countermeasures are investigated theoretically and experimentally to find the effective methods of reducing the shock acceleration on hard disk driver during one side fall test. The hard disk drive is the most sensitive part in a laptop computer. This research shows the effects of the spring constant of rubber pad, the reinforcement of mechanical parts and the location of a hard disk driver, on the shock reduction.

  • PDF

Characteristics of Alkali-Silica Reaction Product of Mortar Bar by ASTM C 1260 Test (ASTM C 1260 시험 콘크리트 시편의 알칼리-실리카 반응 생성물 특징)

  • Hong, Seung-Ho;Yun, Kyong-Ku
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2006.11a
    • /
    • pp.541-544
    • /
    • 2006
  • This study was performed to proof expansion effect of the mortar bar due to Alkali-silica Reaction (ASR) by ASTM C 1260 test. Recently, the failure case of cement concrete pavement by ASR was reported in Korea. Cement concrete structures are caused crack by ASR. The service life of cracked cement concrete structures by ASR will be shorted. In this study, crushed the slate rock producted Chungcheongnamdo Boryeong was caused 0.3% expansion at 14 days due to ASR by ASTM C 1260 test. The particular spectrum showed that the ASR gel was analyzed contents included Si, Na, K, and Ca by EDX (electron dispersive X-ray spectrometer). It was verified that the crushed aggregate was caused expansion by ASR in Korea.

  • PDF