• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.2
• /
• pp.167-174
• /
• 1996

In this paper, a fault location algorithm is presented, which uses novel signal processing techniques and takes a new paradigm to overcome some drawbacks of the conventional methods. This new method for fault location on electric power transmission lines uses only one-terminal fault signals. The main feature of the method is hat it uses the high frequency components in fault signal and considers the influence of the source network by using a traveling wave propagation characteristics. As a result, we can develop a high speed, good accuracy fault locator.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.4
• /
• pp.121-126
• /
• 2010

The automotive weather strip has functions of isolating of water, dust, noise and vibration from outside. To achieve good sealing performance, weather strip should be designed to have the high contact force and wide contact area. However, these design causes excessive permanent deformation of weather strip. The causes of permanent deformation is generally explained to be the chemical material detrioration and physical variation and cyclic loading, etc. This paper introduces a numerical method to predict the permanent deformation using the time dependent viscoelastic model which is represented by Prony series in ABAQUS. Uniaxial tension and creep tests were conducted to obtain the material data. And the lab. test for the permanent deformation was accelerated during shorter time, 300 hours. The permanent deformation of weather strip was successfully predicted under the different loading conditions and different section shapes using the suggested numerical process.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.12
• /
• pp.25-35
• /
• 1995

An analysis method of electromagnetic coupling through an arbitrarily shaped aperture on the upper wall of parallel-plate waveguide, when excited by an electromagnetic plane wave from outside, is considered. The mixed-potential integral equation, in which Green's functions are expressed in a computationally efficient closed form by using the Prony's method and the Sommerfeld identity, is formulated. Expanding the unknown equivalent magnetic surface current in terms of two-dimensional rooftop-type basis functions and choosing razor testing, the integral equation is reduced to a linear algebraic equation, which is solved. The results are compared with the previous results. Fairly good agreements between them are observed.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.449-453
• /
• 1987

This paper presents the detecting algorithm of inrush current which causes protective equipment to maloperate in energizing a power distribution line. This detecting algorithm uses the method which extracts the decay component and energy of 2nd harmonics by Prony Spectral Estimation Method existed AR model to new ARMA model. In this paper, the inrush currents are obtained by model simulations and fild tests. By applying these data to the detecting algorithm, it has been confirmed to discriminate inrush currents from fault currents.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.42-44
• /
• 1994

This paper presents the method of estimating integral coefficients of new distance relaying algorithm for transmission line protection. The proposed method is based on the differential equation calculates impedance value by approximation of integral term of integro-differential equation which relate voltage with current. As a result, we can determine the integral coefficients in least square error sense in frequency domain and we take into consideration the analog filter characteristics and frequency domain characteristics of the system to be protected. The simulation results showed that these coefficients can be successfully used to obtain impedance value in distance relay.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.75-77
• /
• 1994

This paper presents a method of obtaining transmission network equivalents from the network's driving-point admittance characteristic. Proposed method is based on modal decomposition representation for the large-scale interconnected system. As a result, Norton-type of discrete-time filter model can be generated. It can reproduce the driving-point admittance characteristic of the network. Furthermore proposed model can be implemented into the EMTP in a direct manner. The simulation results with the full system representation and the developed equivalent system showed a good agreement.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.78-80
• /
• 1994

Conventional methods for root finding of the algebraic equations are intrinsically synthetic division methods, i.e., which are the factorization in forms of $f(x)=(x-x_i)Q(x)$. So existing methods have some demerits such as deflation and root-polishing procedures. To overcome these defects a new powerful algorithm, namely circular arithmetic algorithm(CSM), was introduced and has been investigated about its fascinating properties. In this paper, we will propose a simple and effective method of getting the initial guesses for the roots of the equation. With this method the CSM can me all the root of equation with great efficiency.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1729-1734
• /
• 2000

Complex dispersion relations in a cylindrical, foam-lined duct were successfully identified by using an iterative Prony series method. Techniques for using the iterative procedure successfully are described in detail, particularly with regard to model order selection and the identification of parameter starting values. It is shown that modal wave speeds and spatial attenuations per wavelength can be derived from the complex dispersion relations obtained using the iterative procedure. In addition, a finite element simulation is shown to well represent corresponding experimental measurement in terms of modal wave speeds and spatial attenuations.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.298-302
• /
• 2002

Equivalent volume estimation of the coupler and two coupled microphones has a key role in standard microphone pressure calibration. The equivalent volume of the microphone is determined by the dynamic characteristics of the diaphragm system and front cavity. Therefore the modal parameters of diaphragm system - natural frequency and damping fatter - should be measured explicitly for the estimation of the equivalent volume. The diaphragm system is composed of the vibrating diaphragm, back slit behind diaphragm, pressure equalization vent, and front cavity which are acoustically coupled. In the measurement, the electrostatic actuator was used to excite the system with the swept sine, and the frequency response was obtained. The close actuator in front of the diaphragm must influence the radiation impedance of the system, and then the modal parameters. From the measured frequency response, the natural frequency and the damping factor could be estimated with the Complex exponential method based on the Prony model and the zero crossing real and imaginary plot.

• Structural Engineering and Mechanics
• /
• v.17 no.5
• /
• pp.727-734
• /
• 2004

An uncoupled computational model for analyzing the hygrothermal dynamic response of composite laminates has been developed. The constitutive equations, expressed in an integral form, and involving relaxation moduli are adopted, to describe the non-aging hygrothermorheologically simple materials. A Prony series represents the relaxation moduli is exploited in order to derive a recursive relationship, and thereby eliminate the storage problem that arises when dealing with material possessing memory. The problem is formulated in a descritized variational form. Mindlin and higher order finite elements are employed for spatial descretization, while the Newmark average acceleration scheme is exploited for temporal descritization. The adopted recursive formula uses only the details of the previous event to compute the details of the current one. Numerical results of the displacement fields of both thin and thick viscoelastic laminates problems are discussed to show up the effectiveness of Mindlin and higher-order shear theories.