• Journal of ILASS-Korea
• /
• v.22 no.4
• /
• pp.190-196
• /
• 2017

The aim of this work is to investigate the combustion and exhaust emission characteristics of low-temperature combustion (LTC) at various EGR test conditions using a single cylinder common-rail diesel engine. In high EGR rate combustion mode with DME fuel, 30% (${\Phi}=0.61$) and 50% (${\Phi}=0.86$) of EGR were respectively examined, and then the combustion, exhaust emissions, nano-particle characteristics of each cases were measured. From these results, it revealed that The ignition delay and combustion duration are prolonged as the increase of EGR rate. In addition, at an advanced injection timing (BTDC $30^{\circ}$), ignition delays were fairly increased because the dilution effect of EGR and also low charge in-cylinder temperature created a lean mixture, thus decreased the peak release rate.

• Journal of Chest Surgery
• /
• v.22 no.5
• /
• pp.834-838
• /
• 1989

Tracheal stenosis is being encountered more frequently as ventilatory support and cuffed tubes are increasingly used for treatment of respiratory failure. We experienced 13 cases of tracheal stenosis treated surgically at department of Thoracic and Cardiovascular Surgery, school of medicine, Kyung Hee university during the 4 years. The causes of tracheal stenosis were prolonged endotracheal intubation 5 cases, tracheostomy 3 cases, tracheal tumor 2 cases, thyroid tumor 1 case and congenital double aortic arch 1 case. The methods used to manage the tracheal stenosis were tracheal resection % end to end anastomosis 8 cases, 2 cases of subglottic stenosis were underwent primary laryngotracheal anastomosis, Lt. aortic arch division 1 case, and stent insertion 2 cases. In two cases, who had 6 cm in length of tracheal stenosis, we were underwent tracheal resection k end to end anastomosis with supralaryngeal release procedure. Postoperative courses were uneventful except one case with tracheal tumor.

• BMB Reports
• /
• v.54 no.5
• /
• pp.260-265
• /
• 2021

Dysregulation of inflammation induced by noninfectious stress conditions, such as nutrient deprivation, causes tissue damage and intestinal permeability, resulting in the development of inflammatory bowel diseases. We studied the effect of autophagy on cytokine secretion related to intestinal permeability under nutrient deprivation. Autophagy removes NLRP3 inflammasomes via ubiquitin-mediated degradation under starvation. When autophagy was inhibited, starvation-induced NLRP3 inflammasomes and their product, IL-1β, were significantly enhanced. A prolonged nutrient deprivation resulted in an increased epithelial mesenchymal transition (EMT), leading to intestinal permeability. Under nutrient deprivation, IL-17E/25, which is secreted by IL-1β, demolished the intestinal epithelial barrier. Our results suggest that an upregulation of autophagy maintains the intestinal barrier by suppressing the activation of NLRP3 inflammasomes and the release of their products, including pro-inflammatory cytokines IL-1β and IL-17E/25, under nutrient deprivation.

• Polymer(Korea)
• /
• v.27 no.1
• /
• pp.9-16
• /
• 2003

Ipriflavone (IP) stimulates proliferation and differentiation of osteoblast and also enhances calcitonin secretion in the presence of estrogen. Poly(lactide-co-glycolide) (PLCA) due to its controllable biodegradability and relatively good biocompatibility is one of the most significant candidates for the study of drug controlled release system. In this study, IP-loaded PLGA microspheres (MSs) was prepared by using conventional O/W solvent evaporation method. The size of MSs was in the range of 5~200 $mu extrm{m}$. The morphology of MSs was characterized by SEM. And, in vitro release amounts of IP were analyzed by HPLC. The highest encapsulation efficiency were obtained by using gelatin and polyvinyl alcohol (PVA) as emulsifiers. The morphology, size distribution, and in vitro release pattern of MSs were changed by several preparation parameters such as molecular weights (8, 20, 33 and 90 kg/mol), polymer concentrations (2.5, 5, 10 and 20%), emulsifier types (PVA, gelatin and Tween 80), initial drug loading amount (5, 10, 20 and 30%) and stirring speed (250, 500 and 1000 rpm). The release of IP in vitro was more prolonged over 30 days, with close to zero-order pattern by controlling the preparation parameters. The physicochemical properties of IP-loaded PLGA MSs were investigated by XRD and DSC.

• The Korean Journal of Physiology and Pharmacology
• /
• v.22 no.2
• /
• pp.183-192
• /
• 2018

Post-traumatic stress disorder (PTSD) is a trauma-induced psychiatric disorder characterized by impaired fear extermination, hyperarousal, anxiety, depression, and amnesic symptoms that may involve the release of monoamines in the fear circuit. The present study measured several anxiety-related behavioral responses to examine the effects of berberine (BER) on symptoms of anxiety in rats after single prolonged stress (SPS) exposure, and to determine if BER reversed the dopamine (DA) dysfunction. Rats received BER (10, 20, or 30 mg/kg, intraperitoneally, once daily) for 14 days after SPS exposure. BER administration significantly increased the time spent in the open arms and reduced grooming behavior during the elevated plus maze test, and increased the time spent in the central zone and the number of central zone crossings in the open field test. BER restored neurochemical abnormalities and the SPS-induced decrease in DA tissue levels in the hippocampus and striatum. The increased DA concentration during BER treatment may partly be attributed to mRNA expression of tyrosine hydroxylase and the DA transporter in the hippocampus, while BER exerted no significant effects on vesicular monoamine transporter mRNA expression in the hippocampus of rats with PTSD. These results suggest that BER had anxiolytic-like effects on behavioral and biochemical measures associated with anxiety. These findings support a role for reduced anxiety altered DAergic transmission and reduced anxiety in rats with PTSD. Thus, BER may be a useful agent to treat or alleviate psychiatric disorders like those observed in patients with PTSD.

• The Korean Journal of Physiology and Pharmacology
• /
• v.22 no.5
• /
• pp.525-538
• /
• 2018

Post-traumatic stress disorder (PTSD) is a trauma-induced psychiatric disorder characterized by impaired fear extermination, hyperarousal, and anxiety that may involve the release of monoamines in the fear circuit. The reported pharmacological properties of tetramethylpyrazine (TMP) include anti-cancer, anti-diabetic, anti-atherosclerotic, and neuropsychiatric activities. However, the anxiolytic-like effects of TMP and its mechanism of action in PTSD are unclear. This study measured several anxiety-related behavioral responses to examine the effects of TMP on symptoms of anxiety in rats after single prolonged stress (SPS) exposure by reversing the serotonin (5-HT) and hypothalamic-pituitary-adrenal (HPA) axis dysfunction. Rats were given TMP (10, 20, or 40 mg/kg, i.p.) for 14 days after SPS exposure. Administration of TMP significantly reduced grooming behavior, increased the time spent and number of visits to the open arm in the elevated plus maze test, and significantly increased the number of central zone crossings in the open field test. TMP administration significantly reduced the freezing response to contextual fear conditioning and significantly restored the neurochemical abnormalities and the SPS-induced decrease in 5-HT tissue levels in the prefrontal cortex and hippocampus. The increased 5-HT concentration during TMP treatment might be partially attribute to the tryptophan and 5-hydroxyindoleacetic acid mRNA level expression in the hippocampus of rats with PTSD. These findings support a role for reducing the altered serotonergic transmission in rats with PTSD. TMP simultaneously attenuated the HPA axis dysfunction. Therefore, TMP may be useful for developing an agent for treating psychiatric disorders, such those observed in patients with PTSD.

• Archives of Pharmacal Research
• /
• v.21 no.5
• /
• pp.570-575
• /
• 1998

To develop a cotton derivatives with prolonged antimicrobial activities, homosulfamine (Hs) was coupled to cotton xanthate (CX) via chelate bond in the presence of Cu(II) ion by one- and two-bath processes. In one-bath process, CX was treated with Cu(II)-Hs solution. In two-bath process, CX was treated with Cu(II) ion solution to produce CX-Cu(II) complex, which was isolated and treated in turn with Hs solution. Effects of concentration, Cu(II)/Hs ratio, and pH on the binding of Hs were investigated at $10{\circ}C$ . In one-bath process, binding of hs took place readily with optimum pH around 5-6. the amount of binding increased to give a maximum within 5 min and decreased slowly to establish an equilibrium withhin an hour. In two-bath process, binding of Hs was much lower than that of one-bath process. Release of Hs from CX-Cu(II)-Hs was investigated by batch and flow method. antimicrobial activiteis of CX-Cu(II)-Hs was investigated by batch and flow method. Antimicrobial activities of CX-Cu(II)-Hs were tested against Staphylococcus aureus, Bacillus subtilis, Pseudomonas aeruginosa and Escherichia coli and it showed prolonged activity compared to that of free Hs.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.12 no.2
• /
• pp.1-41
• /
• 2001

The effect of smoking on the quality sausage Sausages were prepared from beef, port, chickens, games, fish and shellfish with polyphosphate salt and spices. Sausage history goes back to 3,000 years of age. The procedure of sausage 1) Meat Curing 2) Meat Control 3) Add Spices 4) Permissible Ingredients 5) Grinding 6) Mixing Emulsion 7) Stuffing 8) Showing 9) Smoking 10) Cooking 11) Drying 12) Packaging Sausage Product to get information on the effect of smoking onto the quality of meat produces. Sausage was smoked under a given conditions. Smoking was conducted as 35f$^{\circ}C$to 6$0^{\circ}C$ the related humidity of smokehouse was still at 60 to 70 percent. Results are as follows: 1. The Penetrated smoke in sausage was prolonged < p.<0.02 when sausage was smoked 2hours at 60~$65^{\circ}C$ the penetrated amount of free acetone in sausage was 0.5mg%. 2. Peroxide value of sausage as heating treatment both at 3$0^{\circ}C$ and at 5$0^{\circ}C$ was prolonged. 3. When sausage was heated at 3$0^{\circ}C$, bacteria of sausage increased In number while at 60~$65^{\circ}C$ bacteria of sausage increased In number fourteen hours. 4. When sausage was treated with smoking the distribution of free amino acids in sausage was changed markedly. 5. The longer smoking time of the products was the higher the content. 6. In case of oak wood smoke flavoring all of test samples. 7. Rapid decrease of does-response mutagenic curve of the smoke flavoring of oak wood and apple wood by in the peak of curve and phenol in the smoke flavoring. Continuous efforts are required to make sausages easily in the butcher shops and in the restaurants. 8. Sausage texture evaluation has 13 rules. It is Elasticity, Surface Moisture, Surface Smoothness, Center Hardness, Skin Toughness, Cohesiveness, Denseness, Moisture Release, Cohesiveness of Mass, Lumpiness, Graininess (of Contents), Skin separation, Oiliness and sensory 11 rules evaluation is color, texture, mold, flavor, sweet test, salty, sourness, bitter, and savory taste. 9. Smoked, component, peroxide value, bacteria, color, free amino acid, tenderness, flavor, shrinkage are important values.

• Polymer(Korea)
• /
• v.34 no.5
• /
• pp.459-463
• /
• 2010

Amphotericin B (AmB) is anti-fungal agent for the treatment of systemic fungal infections, but its poor solubility has limited clinical applications. In this study, a new gel formulation made up of L-arginine as solubilizer, thermosensitive Poloxamer 407 (P 407), and adhesive carbopol was designed for effective solubilization and delivery of AmB. The aqueous solubility of AmB was enhanced up to 2.6 mg/mL by addition of L-arginine. Aqueous P 407 solutions of more than 20% w/v showed thermo-induced sol-gel-sol phase transition. The phase transition behavior was affected by the presence of AmB and L-arginine, and the phase transition range was broadened by addition of carbopol. In vitro drug release was improved by the solubilizing effect of L-arginine, and the presence of mucoadhesive carbopol prolonged the release rate as a function of concentration.

• Polymer(Korea)
• /
• v.33 no.1
• /
• pp.26-32
• /
• 2009

The aim of this research was to prepare microparticulate systems based on poly (lactide-co-glycolide)(PLGA) for the local release of ipriflavone in order to reduce bone loss. We developed the IP loaded PLGA microspheres using relatively simple oil-in-water(O/W) solvent evaporation method. HPLC was used to perform the in vitro release test of IP and morphology of cell attached on the micro-spheres was investigated using SEM. Cytotoxicity was assayed by cell counting kit-8 (CCK-8) test. Osteogenic differential cells were analyzed by ALP activity. Through RT-PCR analysis, we observed osteocalcin, ALP, and Type I collagen mRNA expression. The release of IP in vitro was more prolonged over 42 days and IP/PLGA microspheres showed the improvement on the cell proliferation, ALP activity and RT-PCR comparing with control (only PLGA). This initial research will be used to direct future work involved in developing this composite injectable bone tissue engineering system.