• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.287-288
• /
• 2005

In this study, we have investigated electro-optical characteristics of thermal and UV stressed TN cells on the rubbed polyimide surface. Mono-domain alignments of thermal stressed TN cells over temperature of liquid crystal isotropic phase were almost same that of no thermal stressed TN cells. Also, threshold voltage and response time of thermal stressed TN cells were same that of no thermal stressed TN cells. Finally, the residual DC voltage of the thermal stressed TN cell on the polyimide surface show decrease of characteristics as increasing thermal stress time. Therefore, thermal stability of TN cell was decreased by high thermal stress for the long times.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.11
• /
• pp.1033-1036
• /
• 2006

We have investigated electro-optical characteristics in three kinds of twisted nematic (TN) cells on the polyimide surface. The threshold voltage and the response time of thermal stressed TN cells were same that of no thermal stressed TN cells. There were little change of value in these TN cells. On the other hand, transmittance of no thermal stressed TN cells were better than that of thermal stressed TN cells. Transmittances of TN cells on the polyimide surface decreased by increasing thermal stress time. Moreover, the residual DC of the thermal stressed TN cells increased as increasing thermal stress temperature and time. Therefore, thermal stability of TN cells were decreased gradually by giving high thermal stress for a long time.

• Journal of Applied Reliability
• /
• v.6 no.2
• /
• pp.173-186
• /
• 2006

This paper presents a study on the failure mechanism for optical engine of Projection TV. The lenses of which optical engine composes are failed by various environmental conditions, that is, thermal effect, moisture effect, mechanical shock or chemical effect. By surveying on actual TV working condition, the major factor of failure was turned out the thermal effect. Because the actual surface temperature of optical engine rose at max. $51^{\circ}C$ during it worked, the relative humidity around optical engine was kept at less than 20% that is difficult to do chemical reaction with humidity. Therefore we can make a conclusion that the major failure of optical engine resulted from thermal effect.

• Information Display
• /
• v.3 no.6
• /
• pp.3-7
• /
• 2002

차세대 디스플레이로 부각되는 FPD(Flat Display Panel) 가운데 Digital TV 및 산업용 Display로 각광 받고 있는 PDP(Plasma Display Panel)는 최근 LCD, Projection Display 등의 비약적인 기술발전으로 인한 치열한 경쟁 속에서도 지속적인 기술발전을 거듭하고 있다. PDP는 자발광 Display로서 CRT에 버금가는 밝기, 선명성, 넓은 시야각, 색재현력 등의 장점을 가지고 있으며 소비전력, 발광효율, 감성화질 등의 향상에 노력을 경주하고 있다. 본 소고에서는 이러한 PDP의 고화질 기술동향에 대해 알아보겠다.

• Journal of the Optical Society of Korea
• /
• v.6 no.2
• /
• pp.21-26
• /
• 2002

Interferometric metrology with a null CGH(computer-generated hologram) is presented for measuring highly aspheric surfaces used in a large screen projection television system with high accuracy. The cubic spline surface model which works in a single-pass configuration with a refractive index of object space 0 is used for designing a null CGH. A hybrid null corrector with plano-concave lens in front of a CGH is presented to make the CGH easier to fabricate. Experimental results are presented to demonstrate the validity of the proposed technique.

• Journal of Biomedical Engineering Research
• /
• v.35 no.5
• /
• pp.151-159
• /
• 2014

Computed tomography (CT) is one of the most widely used medical imaging modality. However, substantial x-ray dose exposed to the human subject during the CT scan is a great concern. Region-of-interest (ROI) CT is considered to be a possible solution for its potential to reduce the x-ray dose to the human subject. In most of ROI-CT scans, the ROI is set to a circular shape whose diameter is often considerably smaller than the full field-of-view (FOV). However, an arbitrarily shaped ROI is very desirable to reduce the x-ray dose more than the circularly shaped ROI can do. We propose a new method to make a non-circular convex-shaped ROI along with the image reconstruction method. To make a ROI with an arbitrary convex shape, dynamic collimations are necessary to minimize the x-ray dose at each angle of view. In addition to the dynamic collimation, we get the ROI projection data with slightly lower sampling rate in the view direction to further reduce the x-ray dose. We reconstruct images from the ROI projection data in the compressed sensing (CS) framework assisted by the exterior projection data acquired from the pilot scan to set the ROI. To validate the proposed method, we used the experimental micro-CT projection data after truncating them to simulate the dynamic collimation. The reconstructed ROI images showed little errors as compared to the images reconstructed from the full-FOV scan data as well as little artifacts inside the ROI. We expect the proposed method can significantly reduce the x-ray dose in CT scans if the dynamic collimation is realized in real CT machines.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.1
• /
• pp.51-59
• /
• 1999

In this paper we propose the technique for tracking players and a ball and for obtaining players' ground traces using image mosaic in general soccer sequences. Here, general soccer sequences mean the case that there is no extreme zoom-in or zoom-out of TV camera. Obtaining player's ground traces requires that the following three main problems be solved. There main problems: (1) ground field extraction (2) player and ball tracking and team indentification (3) player positioning. The region of ground field is extracted on the basis of color information. Players are tracked by template matching and Kalman filtering. Occlusion reasoning between overlapped players in done by color histogram back-projection. To find the location of a player, a ground model is constructed and transformation between the input images and the field model is computed using four or more feature points. But, when feature points extracted are insufficient, image-based mosaic technique is applied. By this image-to-model transformation, the traces of players on the ground model can be determined. We tested our method on real TV soccer sequence and the experimental results are given.

• The Journal of Korean Association of Computer Education
• /
• v.7 no.6
• /
• pp.85-93
• /
• 2004

We investigated the proper display environment for japanese electronic character reading lessons through the experiment with a projection TV and a computer. For the purpose of finding out the effect of prior learning activities at the context of authentic Japanese text orthography, which includes dual notation, words spacing, etc., we also made an experiment on comprehending the web documents which are extracted from japanese web sites. From the experimental results, we acquired a conclusion that two approaches are needed to enhance the ability of comprehending Japanese web documents which is newly added to the 7th curriculum revision. For short-term approach, we need to utilize Japanese web documents as learning materials. For long-term approach, we have to reconsider whether the orthography of the current Japanese textbooks is suitable or not.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.1
• /
• pp.53-60
• /
• 1998

In this paper, the principle of operation, the part characteristic, characteristic of component movement, analysis are carried out for camcoder iris assembly which is one of the important element component in Video camera large projection TV instrument. And some Know-how for development of element component is also included. The magnetic field circuit for the small and simple structure with low power consumption is introduced and new materials of yoke for small motor system is suggested. Especially, the relation with remained magnetic field and operation duration time is analyzed by experimental results. Some problems of nonlinear torque characteristics included in this system is considered to obtain the simple and low cost structure in domestic production. Furthermore, development procedure is suggested for iris assembly and some methods to reduce the burr with some check points for small precise accessories are explained.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.177-180
• /
• 2005

We have investigated electro-optical characteristics in three kinds of TN cells on the polyimide surface. Transmittance of no thermal stressed TN cells were better than that of thermal stressed TN cells. Also. the threshold voltage and the response time of thermal stressed TN cells were same that of no thermal stressed TN cells. There were little change of value in these TN cells. On the other hand. transmittances of TN cells on the polyimide surface decreased by increasing thermal stress time. Moreover. the residual DC of the thermal stressed TN cells on the polyimide surface showed the characteristics of thermal stressed TN cells were weakened as increasing thermal stress temperature and time. Therefore. thermal stability of TN cells were decreased gradually by giving high thermal stress for a long time.