• Structural Engineering and Mechanics
• /
• v.60 no.2
• /
• pp.211-223
• /
• 2016

Static loading and fluid impact tests on plates containing mesh reinforcement and polypropylene fibers in ratios of 0 to 3% by volume were performed. The objective was to observe the effect of fluid mass on the total impulse that caused the impact event and the influence of fiber amount on the impact resistance, and to estimate the velocity of fluid that causes scabbing, perforation or total disintegration. The study is the first to express the fluid impact resistance of polypropylene fiber reinforced concrete plates.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.3
• /
• pp.213-220
• /
• 2014

A program that predicts trajectories of projectiles influenced by the interference flow field of helicopters is developed. The interference flow field are computed using a compressible inviscid solver in conjunction with an actuator disc model. The trajectories are predicted using 6-DOF (Degree of Freedom) equations as well as an alternative form of modified point mass equations of motion. The method for the interference flow field prediction method are validated with ROBIN(ROtor Body INteraction) model. A Sierra international bullet and a 105mm projectile are used to validate the trajectory method. Trajectories of a Sierra International bullet and a HYDRA 70 rocket firing from a helicopter are predicted.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.254-255
• /
• 2017

The aim of this study is to investigate the impact resistant performance of steel short fiber-reinforced cement based composites (SFRCCs) containing 1.0, 1.5, 2.0 and 3.0% volume fraction of steel short fibers subjected to high velocity impact of steel projectile (the diameter of 19.05mm and the mass of 28.13g). The gunpowder impact facility was used for impact tests, and the impact velocity was from about 350 to 700m/s. The specimens were damaged in various failure modes, which are penetration, scabbing, and perforation. Comparing with Plain specimen, SFRCCs have superior capacity on the scabbing limit, and slightly bulged in the back side under the impact velocity of 700m/s. In addition, the impact resistant performance of SFRCCs improved with increase of steel short fiber volume ratio. The fibers play an important role in controlling the local damage of SFRCCs.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.17 no.3
• /
• pp.196-200
• /
• 2014

Co-existing pyloric submucosal masses with hypertrophic pyloric stenosis (HPS) are very rare and treating these lesions is always a problem. A 20-day-old boy presented with recurrent episodes of projectile non-bilious vomiting lasting for 5 days. HPS was suspected due to the presenting age and the symptoms. The sonography demonstrated not only circumferential wall thickening of the pylorus, but also a pyloric submucosal mass. At laparotomy, a 0.8 cm sized pyloric submucosal mass was identified along with a hypertrophied pylorus. Pyloric excision was performed due to the possibility of sustaining the symptoms and malignancy. The pathological report of the submucosal mass was ectopic pancreas. Coexisting pyloric lesions can be diagnosed along with HPS, and surgical excision, not just pyloromyotomy, should be considered in these circumstances. To the best of our knowledge, this is the first case report of pyloric ectopic pancreas and HPS to be diagnosed concurrently.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2775-2780
• /
• 2007

The ballistic range has long been employed in a variety of engineering fields such as high-speed impact engineering, projectile aerodynamics and aeroballistics, since it can create very high-pressure states in a short time. Since the operation of the ballistic range includes many complicated processes, each should be studied in detail for the best operation of the device. One of the main processes which have a major influence in its operation is the compression of the driver gas. Most of the studies available in this field hardly discuss this process in detail and thus lack a proper understanding of its effect. In the present study, a computational analysis has been made to investigate the compression process in the pump tube of a ballistic range. The results obtained are validated with some experimental data. It is seen that the pump tube parameters and the piston mass significantly affect the compression process and the time to build up the required diaphragm rupture pressure.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.10a
• /
• pp.145-150
• /
• 2003

The present study aims to optimize the performance of the Two-Stage Gas Gun by using the experimentally obtained data. RSM(Response Surface Method) was adopted in the optimization process to find the operating parameter than can maximize the projectile speed with the minimum number of tests. To decide the test points which results can consist of the response surface, 3$^{k}$ full factorial method was used, and the design variables were chosen with piston mass and 2$^{nd}$ driver fill pressure. The response surface was composed by nine test results and consequently the optimization was done with GENOCOP III, inherently GA code, in order to seek the optimal test point. The optimal test condition from the response surface was verified by the experiment. Results showed that the optimization process with response surface can successfully predict the test results fairly well. This study shows the possibility of performance optimization for the experimental facilities using numerical optimization algorithm.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.389-398
• /
• 2011

Although the currently available surface spectroscopic techniques provide powerful means of studying atoms and simple molecules on surfaces, the identification of complex molecules and functional groups is a major concern in surface analysis. This article describes a recently developed method of surface molecular analysis based on reactive ion scattering (RIS) of low energy (< 100 eV) $Cs^+$ beams. The RIS method can detect surface molecules via a mechanism in which a $Cs^+$ projectile picks up an adsorbate from the surface during the scattering process. The basic principles of the method are reviewed and its applications are discussed by showing several examples from studies of molecules and their reactions on surfaces.

• Journal of Mechanical Science and Technology
• /
• v.18 no.10
• /
• pp.1829-1836
• /
• 2004

This study presents the performance optimization of hypervelocity launcher system by using the experimentall data. During the optimization, the RSM (Response Surface Method) is adopted to find the operating parameters that could maximize the projectile speed. To construct a reliable response surface model, 3 full factorial method is used with the selected design variables, such as piston mass and 2 driver fill pressure. Nine test data could successfully construct the reasonable response surface, which used to yield the optimal operational conditions of the system using the genetic algorithm. The optimization results are confirmed by the experimental test with a good accuracy. Thus, the optimization can improve the performance of the facility.

• Structural Engineering and Mechanics
• /
• v.42 no.6
• /
• pp.831-847
• /
• 2012

Impact from water-borne debris during tsunami and flood events pose a potential threat to structures. Debris impact forces specified by current codes and standards are based on rigid body dynamics, leading to forces that are dependent on total debris mass. However, shipping containers and other debris are unlikely to be rigid compared to the walls, columns and other structures that they impact. The application of a simple one-dimensional model to obtain impact force magnitude and duration, based on acoustic wave propagation in a flexible projectile, is explored. The focus herein is on in-air impact. Based on small-scale experiments, the applicability of the model to predict actual impact forces is investigated. The tests show that the force and duration are reasonably well represented by the simple model, but they also show how actual impact differs from the ideal model. A more detailed three-dimensional finite element model is also developed to understand more clearly the physical phenomena involved in the experimental tests. The tests and the FE results reveal important characteristics of actual impact, knowledge of which can be used to guide larger scale experiments and detailed modeling. The one-dimensional model is extended to consider water-driven debris as well. When fluid is used to propel the 1-D model, an estimate of the 'added mass' effect is possible. In this extended model the debris impact force depends on the wave propagation in the two media, and the conditions under which the fluid increases the impact force are discussed.

• Steel and Composite Structures
• /
• v.36 no.6
• /
• pp.703-710
• /
• 2020

This paper presents numerical and theoretical investigations on the strain rate in steel-concrete composite (SC) panels under low-velocity impact of a hemispherical rigid body. Finite element analyses were performed on five specimens with different loading rates. The impact energy was kept constant to eliminate its influence by simultaneously altering the velocity and mass of the projectile. Results show that the strain rate in most parts of the specimens was low and its influence on bearing capacity and energy dissipation was limited in an average sense of space and time. Therefore, the strain rate effect can be ignored for the analyses of global deformation. However, the strain rate effect should be considered in local contact problems. Equations of the local strain and strain rate were theoretically derived.