• Asian Journal of Atmospheric Environment
• /
• v.5 no.4
• /
• pp.228-236
• /
• 2011

Since most Green House Gases (GHGs) and air pollutants are generated from the same sources, it will be cost-effective to develop a GHGs reduction plan in combination with simultaneous removal of air pollutants. However, effects on air pollutants reduction according to implementing any GHG abatement plans have been rarely studied. Reflecting simultaneous removal of air pollutants along with the GHGs emission reduction, this study investigated relative cost effectiveness among GHGs reduction action plans in Busan Metropolitan City. We employed the Data Envelopment Analysis (DEA), a methodology that evaluates relative efficiency of decision-making units (DMUs) producing multiple outputs with multiple inputs, for the investigation. Assigning each GHGs reduction action plan to a DMU, implementation cost of each GHGs reduction action plan to an input, and reduction potential of GHGs and air pollutants by each GHGs reduction action plan to an output, we calculated efficiency scores for each GHGs reduction action plan. When the simultaneous removal of air pollutants with the GHGs reduction were considered, green house supply-insulation improvement and intelligent transportation system (ITS) projects had high efficiency scores for cost-positive action plans. For cost-negative action plans, green start network formation and running, and daily car use control program had high efficiency scores. When only the GHGs reduction was considered, project priority orders based on efficiency scores were somewhat different from those when both the removal of air pollutants and GHGs reduction were considered at the same time. The expected action plan priority difference is attributed to great difference of air pollutants reduction potential according to types of energy sources to be reduced.

• Journal of Digital Contents Society
• /
• v.14 no.4
• /
• pp.471-479
• /
• 2013

WiBro technology provide mobile devices with a transmission speed of more than 1 Mbps even under the condition of high mobility (120 km/h). In a building, however, there is more demand for high bandwidth for various activities, and WiBro services may not be available. In order to guaranteeing a seamless service continuity and high transmission capability for mobile users within a specific establishment that has deployed WiBro network, we should secure an internetworking platform for WiBro and WiFi networks. This paper introduces WiMax forum and 3GPP standards, proposes WiBro-WiFi Interworking (WWI) architecture, its implementation details, and finally verifies validity of the proposal by using OPNet simulations.

• Korean Educational Research Journal
• /
• v.41 no.2
• /
• pp.71-98
• /
• 2020

The university is a top-level educational institution that requires not only the education of undergraduate and graduate students but also the education of ordinary citizens in the community. However, in civil society, university education is mainly focused on lifelong education, and additional measures are needed for universities to implement more education about civil society. Since 2014, the Korea Research Foundation has implemented humanities city support projects, and universities have implemented programs such as humanities lectures, humanities experiences, and humanities week by utilizing local humanities assets. Although these projects are meaningful in that they are carried out through the medium of the area where the university is located, and the scope of participation is wider than that of previous academic projects related to humanities, because they are still carried out by one-off projects, a regional literature center should be established that can continue to conduct the projects even after completion. Furthermore, an efficient network should be established with the institutions in the area in which the university is located.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.1
• /
• pp.69-76
• /
• 2020

Bridges which are components of road network consume large amounts of resources such as concrete and steel materials, which have large environmental impacts during construction. This causes a great environmental burden. In order to reduce the environmental impact caused by the construction of the bridge, the environmental impact should be reviewed based on reasonable data in the early design stage. The purpose of this study is to provide basic data for LCA-based environmental impact assessment in the process of selecting bridge type in the early design stage. For this purpose, design data for four types of PSC bridges (general PSC girder, IPC girder, e-Beam, DR girder) were collected and LCA was performed to analyze the basic unit value and impact factors of environmental load. The results of the analysis showed that the environmental impact of IPC girder was the smallest, and the environmental impact of e-Beam was 133.7% higher than that of IPC girder. In addition, concrete, reinforcement, PC strand, square timber, sheath pipe, and steel plate were derived as the main factors that generate 98.5% of the overall environmental impact of PSC girder.

• Journal of the Korean Society for Railway
• /
• v.20 no.1
• /
• pp.99-110
• /
• 2017

As a part of several Eurasian initiatives, the Korean government is trying to reconnect railways through North Korea to the Asian continent. If South Korea could build a network using railway, it would be a chance to develop a robust economic environment and to motivate economic growth. In the railway reconnection project between North and South Korea, the most important part of the railway roadbed sector is repair or improvement, and then construction of a new line through North Korea. There are not many big differences in the geological conditions; however, climate condition varies greatly during winter. The most significant condition in the safety of railway operation is frost-heaving. However, since South Korea has a relatively mild climate condition compared with North Korea, design and construction specifications under severe weather conditions in winter have not been prepared. This study proposes a plan for revising the railway design standard for underpass structures through an analysis of international standards, leading to site construction to prevent frost-heave.

• Journal of Broadcast Engineering
• /
• v.22 no.5
• /
• pp.579-588
• /
• 2017

Recently, due to the development of network environment, the internet market has been expanding, so it is necessary to standardize the data format and API to exchange information among objects. Therefore, MPEG (Moving Picture Expert Group), an international standardization organization, is establishing the MPEG-IoMT (ISO/IEC 23093) project to standardize the Internet of Things. MPEG-IoMT establishes Core Experiment (CE) and discusses overall data exchange such as data exchange procedure, markup language and communication method. In this paper, core experiments 1, 2, 4, and 5 of the core experiments of MPEG-IoMT will be discussed. The performance information of the sensor, the sensor data, the performance information of the driver, and the exchange procedure of the control command are explained and the exchange of the media additional data is discussed. We compare the markup language and communication method through experiment.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.2
• /
• pp.594-600
• /
• 2017

HVDC transmission systems can be configured in many ways to take into account cost, flexibility and operational requirements. [1] For long-distance transmission, HVDC systems may be less expensive and suffer lower electrical losses. For underwater power cables, HVDC avoids the heavy currents required to charge and discharge the cable capacitance of each cycle. For shorter distances, the higher cost of DC conversion equipment compared to an AC system may still be warranted, due to other benefits of direct current links. HVDC allows power transmission between unsynchronized AC transmission systems. Since the power flow through an HVDC link can be controlled independently of the phase angle between the source and the load, it can stabilize a network against disturbances due to rapid changes in power. HVDC also allows the transfer of power between grid systems running at different frequencies, such as 50 Hz and 60 Hz. This improves the stability and economy of each grid, by allowing the exchange of power between incompatible networks. This paper proposed to establish Korean HVDC technology through a cooperative agreement between KEPCO and LSIS in 2010. During the first stage (2012), a design of the ${\pm}80kV$ 60MW HVDC bipole system was created by both KEPCO and LSIS. The HVDC system was constructed and an operation test was completed in December 2012. During the second stage, the pole#2 system was fully replaced with components that LSIS had recently developed. LSIS also successfully completed the operation test. (2014.3)

• Journal of Digital Convergence
• /
• v.13 no.6
• /
• pp.29-37
• /
• 2015

Entering the convergence education era, the emergence of smart devices removed the constraint of time and space for study, so if we use smart devices appropriately for education, it will strengthen students' abilities and cultivate creative human resource. Therefore the current study analyzed the general application condition of the smart devices through surveys targeted to students and proposed a measure in applying the smart device as an educational information. In relation to information application, a test was proceeded after carrying out education targeted to experiment group students by naming the group information search, communication, cooperation, sharing, report generation, data storage, online assessment and project management activity. Through the test and survey analysis, it was discovered that the experiment group students displayed higher self-efficacy and ability in applying the smart device as information compared to the control group.

• Korean Journal of Organic Agriculture
• /
• v.26 no.3
• /
• pp.489-500
• /
• 2018

Rural Development Administration (RDA) is promoting the AFACI IPM (Asian Food & Agricultural Cooperation Initiative program). AFACI consist of 12 countries including Bangladesh, Cambodia, Thailand, Vietnam and so on. The main goal of the AFACI IPM project is 'Establishment of an international cooperative network for the best management of migratory rice planthoppers and setting data-base of pests occurrence information. As a result of the suvey, Planthoppers were increasing all the way from tillering stage to ripe stage and do not appear to be peak of one or two like korea case. In detail, 1,673 of BPH (Nilaparvata lugens) occurred in survey site of Svay Reang, Cambodia, followed by 1.237 at Dobila, Bangladesh. In the case of White backed planthopper (Sogatella furcifera), 1,163 of WBPH occurred in survey site of Dobila, Bangladesh and 849 WBPH were collected at Hamkuria, Bangladesh. It is expected to verify the occurrence and movement patterns of hoppers among member countries in the future.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.3113-3113
• /
• 2001

Some two years ago our company undertook a project on manufacturing network rationalization to maximize competitiveness through continuous improvement in manufacturing efficiency. One key outcome was the recognition of the benefits that could be derived from timely application of new technology or novel use of existing technologies and even more importantly the need to develop company wide strategies to maximize the impact of such applications. As a direct result an exercise was undertaken to identify the ten most promising technologies from a list of literally hundreds seen as having the capability of making a rapid impact on the manufacturing initiative. One of the outcomes of this exercise was the identification of Near Infrared Spectroscopy as a pivotal technology for improving process understanding, performance, and control to deliver consistent product quality cost effectively with broad applicability across our product range. While NIR had been in use in targeted areas on some of our sites for some years our new challenge was to develop a strategy to extend NIRs application, initially over 17 manufacturing sites, while concurrently expanding the NIR skill base company wide to ensure that the return on initial investment could be further maximized as shared applications across the remaining sites as required. This presentation will provide an overview of how life cycle based user requirement specifications were developed covering: ㆍSpectrophotometers ㆍSample interfaces ㆍSoftware ㆍEquipment and Software qualification ㆍCalibration transfer ㆍ Ease of developing effective user interfaces and control for applications transferred to a production area ㆍUser training ㆍWorld wide support The presentation will also describe the process adopted for vendor selection to ensure maximum utilization of the existing company wide NIR skill base and its future development to expedite applications of the technology in development, quality control and production areas.