• Transactions of Materials Processing
• /
• v.6 no.2
• /
• pp.118-135
• /
• 1997

In order to analyze the deformation and residual curvature of steel sheets in the strip processing lines, a program for calculating curvature and work hardening of sheet was developed. Strip deformation caused by repeated bending under tension in the process lines was analyzed on the basis of the incremental-plasticity theory with the mixed hardenting model for the purpose of predicting the strip shape and the yield stress change. The developed calculation program was applied to predict curl and gutter of sheets within a 10% difference. The yield stress increment was also predicted with the similar accuracy. Application of the model to tension legvelling process showed that gutter could be controlled by intermesh and elongation. The yield stress increment in the electro-galvanizing line calculated by the developed program was found to be dependent on the yield strength, the applied tension and the diameter of the smallest roll.

• Korean Journal of Organic Agriculture
• /
• v.24 no.3
• /
• pp.369-383
• /
• 2016

Crop yield insurance program in Korea has rapidly grown not only in quantity but in quality for 15 years since it was introduced in 2001. Despite growth of Crop insurance, performance evaluation for crop yield insurance has not fully been evaluated at the farm, consumer and national level. The purpose of this study is to conduct the performance evaluation for crop yield insurance through estimating the effects of farm revenue stabilization and social welfare increase with three popular insurance items: apple, pear and sweet persimmon. Based on the analysis of social welfare effect, cost-benefit analysis of operating crop yield insurance was conducted at the national level. We found that crop yield insurance stabilizes farm revenue based on the estimated four risk indicators: Coefficient of Variation, Value at Risk, Certainty Equivalence, and Risk Premium. The result of cost-benefit analysis shows that crop yield insurance increases social net benefit by 44.1 billion won for the three items. As a result, crop yield insurance program has contributed remarkably on social welfare as well as farm management and its role will be more important in the future.

• Animal Bioscience
• /
• v.34 no.11
• /
• pp.1794-1801
• /
• 2021

Objective: The study aimed to evaluate the productive performance, carcass yield, size of digestive organs and nutrient utilization in Mexican Creole chickens, using four diets with different concentrations of metabolizable energy (ME, kcal/kg) and crude protein (CP, %). Methods: Two hundred thirty-six chickens, coming from eight incubation batches, were randomly distributed to four experimental diets with the following ME/CP ratios: 3,000/20, 2,850/19, 2,700/18 and 2,550/17. Each diet was evaluated with 59 birds from hatching to 12 weeks of age. The variables feed intake (FI), body weight gain (BWG), feed conversion (FC), mortality, carcass yield, size of digestive organs, retention of nutrients, retention efficiency of gross energy (GE) and CP, and excretion of N were recorded. Data were analyzed as a randomized block design with repeated measures using the GLIMMIX procedure of SAS, with covariance AR (1) and adjustment of degrees of freedom (Kendward-Roger), the adjusted means were compared with the least significant difference method at a significance level of 5%. Results: The productive performance variables BWG, mortality, carcass yield, fat and GE retention and excretion of N were not different (p>0.05) due to the diet effect. In the 3,000/20 diet, the chickens had lower values of FI, FC, crop weight, gizzard weight, retention, and retention efficiency of CP (p<0.05) than the chickens of the 2,550/17 diet. Conclusion: The Mexican Creole chickens from hatching to 12 weeks of age can be feed with a diet with 2,550 kcal ME and 17% CP, without compromising productive parameters (BWG, mortality, carcass yield) but improving retention and retention efficiency of CP.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.2
• /
• pp.29-38
• /
• 2008

It is well-known that the strength properties of wood connections depend on the density of the wood members, the diameter of the fasteners, the number of fasteners, and the arrangement of the fasteners, etc. In this study, the connection with inserted steel plates and drift pins was made in different configurations. The specimens were Larch and Sugi glulam connections. The specimens were loaded in tension, and the yield loads of the connections were obtained. The values obtained from the tests were compared with the predicted values. Good agreement between the yield loads obtained from the tension failure tests and the predicted yield loads were shown. It was shown that the density of the wood member barely affected the strength properties of the connections. The strength decreases of the Sugi glulam connections by the group effect were less than those of the Larch glulam connections.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.687-691
• /
• 2011

In this paper, we design an 8-bit eSuse OTP (one-time programmable) memory in consideration of EM (electro-migration) and eFuse resistance variation based on a $0.18{\mu}m$ generic process, which is used for an analog trimming application. First, we use an external program voltage to increase the program power applied an eFuse. Secondly, we apply a scheme of precharging BL to VSS prior to RWL (read word line) activation and optimize read NMOS transistors to reduce the read current flowing through a non-programmed cell. Thirdly, we design a sensing margin test circuit with a variable pull-up load out of consideration for the eFuse resistance variation of a programmed eFuse. Finally, we increase program yield of eFuse OTP memory by splitting the length of an eFuse link.

• Korean Journal of Veterinary Research
• /
• v.47 no.2
• /
• pp.157-162
• /
• 2007

Lactic acid bacteria (LAB) has been regarded as a useful microorganism and tried to manipulate plasmid DNA for increasing the usefulness. Although several methods have been developed to isolate plasmid DNA from Escherichia coli (E. coli), these methods were not sufficient to apply to LAB with exception of O'Sullivan's lysis method. So, we evaluated plasmid DNA extraction from LAB using general E. coli preparation methods and tried to improve the extraction yield and DNA purity by modifying O'Sullivan's alkaline lysis method. To improve the extraction yield, salt and carrier were added to precipitant and those were incubated at $-70{^{\circ}C}$. Only incubation at $-70{^{\circ}C}$ was the effective method of those modifications. Purity of plasmid DNA was improved by two times of each centrifugation and phenol/chloroform extraction. However, DNA was damaged by twice extraction with phenol/chloroform. Also, exclusion of ethidium bromide showed negative effect to purity. Additionally, it was recommended that improvement of the extraction yield may be due to centrifugation at high speed for more time and to dissolving complete DNA pellet before addition of 7.5 M ammonium acetate. Extraction using this modification produced higher quality of plasmid DNA.

• Journal of agriculture & life science
• /
• v.45 no.2
• /
• pp.29-34
• /
• 2011

This study was carried out to investigate the flower yield and quality of Lilium Oriental Hybrids as affected by planting date. In cut flower production experiments, effect of planting date and bulb source was studied in rain shelter houses with 30% shading. Four planting dates compared were May 15, June 5, June 25, and July 15. Bulbs used for cut flower production were either imported or produced domestically. The greatest cut flower yield and quality were obtained from bulbs planted either on May 15 or June 25. Bulbs planted on July 15 produced cut flowers of very poor quality and yield, due to high temperatures during the planting time. Therefore, for planting in July, means other than 30% shading have to be adapted to lower temperature during early growth stage. Although plants from imported bulbs had better growth and cut flower yield as compared to domestic bulbs, there was no significant difference.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.4
• /
• pp.330-335
• /
• 2012

This study performed the structure analysis for development and localization of main and nose wheel in Korean Helicopter Program(KHP). Structural stability of wheel is evaluated using ANSYS. Considering wheel and tire interface, Stress analysis was conducted by applying pneumatic of tire, static load, radial load and combined load on main and nose wheel. Considering yield strength at which plastic deformation occurs, simulation results suggest the method which increases structure stability after comparing maximum stress and yield strength.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.4
• /
• pp.273-279
• /
• 2000

Electrical repair method which has replaced laser repair method can replace defective cell by redundancy’s in the redundancy scheme of conventional high density memory. This electrical repair circuit consists of the antifuse program/read/latch circuits, a clock generator a negative voltage generator a power-up pulse circuit a special address mux and etc. The measured program voltage of made antifuses was 7.2~7.5V and the resistance of programmed antifuses was below 500 Ω. The period of clock generator was about 30 ns. The output voltage of a negative voltage generator was about 4.3 V and the current capacity was maximum 825 $mutextrm{A}$. An antifuse was programmed using by the electric potential difference between supply-voltage (3.3 V) and output voltage generator. The output pulse width of a power-up pulse circuit was 30 ns ~ 1$mutextrm{s}$ with the variation of power-up time. The programmed antifuse resistance required below 44 ㏀ from the simulation of antifuse program/read/latch circuit. Therefore the electrical repair circuit behaved safely and the yield of high densitymemory will be increased by using the circuit.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.11
• /
• pp.1542-1550
• /
• 2014

Co-digesting molasses wastewater and sewage sludge was evaluated for hydrogen production by response surface methodology (RSM). Batch experiments in accordance with various dilution ratios (40- to 5-fold) and waste mixing composition ratios (100:0, 80:20, 60:40, 40:60, 20:80, and 0:100, on a volume basis) were conducted. Volatile solid (VS) concentration strongly affected the hydrogen production rate and yield compared with the waste mixing ratio. The specific hydrogen production rate was predicted to be optimal when the VS concentration ranged from 10 to 12 g/l at all the mixing ratios of molasses wastewater and sewage sludge. A hydrogen yield of over 50 ml $H_2/gVS_{removed}$ was obtained from mixed waste of 10% sewage sludge and 10 g/l VS (about 10-fold dilution ratio). The optimal chemical oxygen demand/total nitrogen ratio for co-digesting molasses wastewater and sewage sludge was between 250 and 300 with a hydrogen yield above 20 ml $H_2/gVS_{removed}$.