• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.131-133
• /
• 2005

In this paper, we proposed the program module that expand output points when increased of the output machine for the design of process control system with PLC. In order to incense output points we need the decoding. There is a hardware decoding and a software decoding. In this paper, we proposed the decoding program module which is a software decoding and confirmed feasibility through a simulation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.3
• /
• pp.271-278
• /
• 2015

This paper develops an OBD Diagnostic Program (Program) using Visual Studio (C#), which was used to diagnosis malfunction information from OBD-II system vehicles. We accomplished this using the Program, Diagnostic tests, Board (STN1110), FTDI Basic Cable, Mini USB Cable, OBD Data Cable, and both hybrid and regular vehicles. The Program tests real-time data output, DTC output, sensor value output, engine RPM, waveform data, OBD type check, PID inspection, and whole monitoring. We found vehicles used in this research had 19 PIDs, which was within OBD-II regulations. We also gathered data on control and diagnostic code regulated by OBD-II system, such as, sensor output value, engine RPM, DTC output, each PID analytic value, OBD type, fuel mode, and whole monitoring result value. Using the data collected through the Program appropriately can lead to more effective diagnostic practices and contribute to education.

• Korean Journal of Applied Biomechanics
• /
• v.23 no.1
• /
• pp.45-51
• /
• 2013

The current study developed the analysis program by employing the Polygon Clipping Algorithm to calculate the open area on the court when players try to spike a ball. The program consists of two kinds of output screen. First, on the main output screen, it is possible to calculate both blocked area by net and blockers, and opened area to avoid the blocked area when players spike the ball. Additionally, the secondary output screen shows the moving path of setter and the location of set. Main output screen indicates hitting points of spiking, blocking, and open area. Also, it is possible to analyze the movement of setter, location of set, and hitting point of attacker. The program was tested by comparing real coordinate value and location coordinate value which is operated on the program. To apply this program in the field, future study needs to develop the program that can calculate three dimensions coordinate fast by tracking the location of players or ball in real time.

• Journal of Families and Better Life
• /
• v.26 no.3
• /
• pp.25-36
• /
• 2008

The purpose of study is to evaluate a culture program at the family support centers and to suggest a development direction. Therefore evaluation indication areas are planning adaption, practice validity, and an outcome(output) satisfaction. The study subject was 40 family support centers' final reports. The collected data was analyzed by evaluation framework. The results were as followed; first, the culture program plan described healthy of family, included various family type, family-unit program, but a clear culture program wasn't identified; second, the evaluation of culture program practice presents high goal achievement with small financial budget, large number of participants and various type of program, and finally, the program output showed high satisfaction.

• Journal of KSNVE
• /
• v.4 no.1
• /
• pp.33-42
• /
• 1994

When a vibration is generated due to the misalignment, the reduction of the vibration level is not attainable unless a correct shaft alignment is conducted. In a turbine system, an alignment procedure requires quite a lot amount of expense and time. To reduce this effort, an algorithm of the turbine alignment is developed to be used in the computer program. The program consists of five parts : input, calculation, display of the results, file management, and printer output. In the input part, users must provide the data on the turbine number, the reference value of the alignment, and the number of the feet of the generator. In calculation, the moving distance of the bearing and the necessary amount of the shims are calculated. In the display and the output parts, the calculated results are displayed and calculated. In the display and the output parts, the calculated results are displayed and printed. Then, by using the file management, results and procedures conducted are saved in the floppy diskette or in the hard disk. The developed program can be run in IBM PC compatible with more than 640 KB of main memory with the operating system of MS-DOS v 3.3 or higher. It is developed for novice users with no experience or specialty in this field. The program is not only useful in the power plant application, but also helpful for recording of the alignment procedures.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1989.10a
• /
• pp.1-6
• /
• 1989

To intergrate finite elements Into CAD enviroment, design oriented structure of the finite element program is desirable. For this purpose a program called CFEP has been developed. Generation of geometry data is independently treated in the program to ease the modification of property or loading data. By conveniently handling the large number of load cases with various load combinations, and by comprehensively reporting the results through inclusive output for the multiple analyses, the program greatly facilitates the design process. Interfacing with interactive graphic post-processor, the results of analyses and final designed values are obtained in a compact and comprehensive manner. The paper also describes necessary tasks for developing such program on the economical microcomputer. Sample output of printed and graphical form well illustrates the procedure.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2004.05a
• /
• pp.48-56
• /
• 2004

To perform R&D program, it is necessary to invest input factor(I/F). And these factor are converted to output factors(O/F) at the end of R&D program. Pee. reviewers evaluate output factors and produce evaluation grades(E/G). This paper try to analyze the relationship to I/F, O/F and E/G, According to the analysis results, the relation between I/F and E/G is as weak as the relation between O/F and E/G. The strength of relationship is relatively very strong in the relation between I/F and O/F

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.10
• /
• pp.17-24
• /
• 2015

In this paper, we investigated the output polarization of a Lyot-type optical fiber comb filter based on a polarization-diversity loop structure. It was found that the output state of polarization (SOP) of the filter made a wavelength-dependent evolution, and the spectral periods of the output SOP variation in flat-top and lossy flat-top band modes were the channel separation of the filter and its half, respectively. For a certain input SOP, the filter could pass or reject specific spectral sections by adding and controlling an output analyzer. In particular, it was theoretically anticipated that the filter with the output polarizer could provide the fine continuous tuning of its pass band center in a wavelength range corresponding to the ${\pm}9.5%$ of channel spacing(0.8nm) when the input SOP was properly adjusted. It is expected that this tuning function can be effectively applied to suppress unwanted spectral portions in modulated optical signals.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.35 no.11
• /
• pp.487-494
• /
• 1986

This paper is concerned with the techniques of error check and reduction of state diagram using logic programming. Error check program aims to check not only syntax errors but also semantic errors. And reduction program optimizes the state diagram by finding the redundant equivalence states and removing those from the set of states. The input of both program is state diagram represented as state table form. The output of error check program is error comment. The output of reduction program is equivalence reduced state table. Both programs are implemented using prolog. Prolog has very powerful pattern matching, and its automatic back-tracking capabilities facilitate easy-to-write error check and reduction programs.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.499-502
• /
• 2008

This paper presents on research findings of how Visual C++ program can be used to generate codes capable of performing ramjet engine simulation To understand the diversity and applicability of this tool an arbitrary ramjet model will be considered for which generated output values will be compared with those from a commercial program GASTURB 9 iterated under the same input parameters. Several governing thermodynamic equations will first be discussed in order that we understand the fundamental idea behind values printed out on the GUI. C++ compiler was chosen as a tool of use due to its availability, ease of use, ability to compute functions faster and uniquely possible to make a stand alone GUI executable in DOS mode. The program is developed in such a way that given the ambient flight conditions, burner exit temperature and several geometry areas the program generates its own input values used in the succeeding stations. A close resemblance of output values that define performance and thermodynamic state of the engine was realized between GASTURB 9 and using this code made from C++ compiler.