• Journal of the Korea Society of Computer and Information
• /
• v.13 no.7
• /
• pp.91-98
• /
• 2008

In digital broadcasting, it is possible to multiplex maximum one hundred audio or music programs into MPEG-2 transport stream, which is suitable for transmitting through one channel. In order to check if multiplex music programs are transmitted well, we need a multiplex audio monitoring system that monitors the programs in real-time. In analog broadcasting, we have used hardware-based audio monitoring system for a small number music programs. However, the effectiveness of hardware-based audio monitoring system from the cost and function viewpoint is so low that a new system is needed for digital broadcasting. In this paper, we have designed and implemented a software-based audio monitoring system to satisfy these requirements. In this implementation, only one PC is used without other hardware facilities, and the system monitors digital broadcasting music programs effectively. Transmitted digital broadcasting streams are demultiplexed into many music programs and the realtime value of audio level and packet error information for these programs are displayed in the screen. Thus, the system detects and shows the abnormal transmitting programs automatically. Simulation results show that effective realtime multiplex audio monitoring is possible for digital broadcasting music programs.

• Plant Journal
• /
• v.10 no.2
• /
• pp.38-47
• /
• 2014

Renewable Portfolio Standards was introduced into the system in Korea in 2012. Interest in the unutilized and renewable energy sources is increasing. and these being actively investigated. An organic rankine cycle has emerged as an alternative in order to take advantage of bio-gas engine heat of sewage treatment plants whose capacity is 1500 kW. The organic rankine cycle power system was simulated by a simulator which is a commercial program of power plant design and performance analysis. The biogas engine is operated by $460^{\circ}C$ and 2.7 kg/s flow rate in the sewage treatment plant. Working fluids(R-601a, R-123, R-245fa) are selected to use in ORC power system in this temperature range. It was the isopentane that is the best performance among three working fluids. It could be obtained net power of 163.1 kW and efficiency of 13.66% from isopentane in the simulation.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.3
• /
• pp.304-315
• /
• 2001

In this paper, we peformed the real-time implementation of AMR(Adaptive Multi-Rate) speech coding algorithm which is adopted for IMT-2000 service using TMS320C6201, i.e., a Texas Instrument´s fixed-point DSP. With the ANSI C source code released from ETSI, optimization is performed to make it run in real-time with memory as small as possible using the C compiler and assembly language. Implemented AMR speech codec has the size of 32.06 kWords program memory, 9.75 kWords data RAM memory, and 19.89 kWords data ROM memory. And, The time required for processing one frame of 20 ms length speech data is about 4.38 ms, and it is short enough for real-time operation. It is verified that the decoded result of the implemented speech codec on the DSP is identical with the PC simulation result using ANSI C code for test sequences. Also, actual sound input/output test using microphone and speaker demonstrates its proper real-time operation without distortions or delays.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.6
• /
• pp.552-558
• /
• 2005

Orthognathic surgery changes patient's mandibular position and environment of related anatomic structures. Many clinicians were interested in these changes and studied about this problem. However, most of them were based on two dimensional cephalogram. According to the development of image and computer system, it would be possible that the airway change is analyzed with three dimensional CT. So we tried to measure the volumetric change of airway and analyzed the relationship between the airway structure and volumetric change. Nineteen patients who experienced orthognathic surgery due to mandibular prognathism were analyzed with 3D CT data (preoperative and postoperative 6 months) and 2D lateral cephalometry. Volumetric change was measured and 3 dimensional change of related structure was assessed with simulation program ($V-works^{(R)}$, 4.0 Cybermed, Korea). Ten patients showed the decrease of airway volume change and nine showed the increase of airway volume change. Volumetric change was determined by dimensional change of mandible and hyoid bone. The dimensional positions of mandible and hyoid bone were the key factor for determining the airway change after surgery. Airway change is also predictable with the dimensional change of mandible and hyoid bone.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.139-147
• /
• 2020

The number of deaths from child traffic accidents in Korea is currently higher than the average figure of OECD members, and attention needs to be paid to reduce the school zone accident rate. According to the TAAS statistics of the Traffic Accident Analysis System, the number of deaths from traffic accidents in children (under 12 years of age) in Korea has been steadily decreasing recently, but the number of accidents and injuries has been continuously increasing and decreasing. With the number of accidents and injuries of children in Korea continuing to increase and decrease, the number of traffic accidents, deaths, and injuries of children in the school zone (under 12 years of age) has also been on the rise since 2019. Therefore, we were different from the preceding study (Study on Improvement through School Zone Accident Risk Survey, Study on Improvement of Children's Traffic Safety Facilities through Simulation Program). In order to prevent traffic accidents among school zones, which have the highest accident rate among children, a survey was conducted on traffic safety facilities and safety awareness of drivers. After that, we will analyze the problems and present measures for improving traffic safety in the school zone and improving drivers' safety awareness.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.2
• /
• pp.128-136
• /
• 2002

In this paper, we developed an acoustic echo canceller in real-time using TeakLite DSP Core, which will be placed in the vocoder chip of a mobile handset. Considering the limited computational capacity given to the acoustic echo canceller in a vocoder chip, we employed a FIR-type adaptive filter using a conventional NLMS algorithm. To begin with, we designed and implemented an acoustic echo canceller with floating-point format C-source code, and then converted it into fixed-point format through integer simulation. Then we programmed and optimized it in the assembler level to make it run ill real-time. After optimization procedure, the implemented echo canceller has approximately 624 words of program memory and 811 words of data memory. With 8 KHz sampling rate and 256 filter taps in the echo canceller that corresponds to 32 msec of echo delay, it requires 14.12 MIPS of computational capacity. For coverage of 16 msec echo delay, i.e., 128 filter taps, 9 MIPS is requited.

• Journal of Radiation Protection and Research
• /
• v.34 no.4
• /
• pp.155-164
• /
• 2009

In this paper, we used computerized glow curve deconvolution (CGCD) software with several models for the simulation of a TL glow curve which was used for analysis. By using the general approximation plus model, parameters values of the glow curve were analyzed and compared with the other models parameters (general approximation, mixed order kinetics, general order kinetics). The LiF:Mg,Cu,Si and the LiF:Mg,Cu,P material were used for the glow curve analysis. And we based on figure of merits (FOM) which was the goodness of the fitting that was monitored through the value between analysis model and TLD materials. The ideal value of FOM is 0 which represents a perfect fit. The main glow peak makes the most effect of radiation dose assessment of TLD materials. The main peak of the LiF:Mg,Cu,Si materials has a intensity rate 80.76% of the whole TL glow intensity, and that of LiF:Mg,Cu,P materials has a intensity rate 68.07% of the whole TL glow intensity. The activation energy of LiF:Mg,Cu,Si was analyzed as 2.39 eV by result of the general approximation plus(GAP) model. In the case of mixed order kinetics (MOK), the activation energy was analyzed as 2.29 eV. The activation energy was analyzed as 2.38 eV by the general order kinetics (GOK) model. In the case of LiF:Mg,Cu,P TLD, the activation energy was analyzed as 2.39 eV by result of the GAP model. In the case of MOK, the activation energy was analyzed as 2.55 eV. The activation energy was analyzed as 2.51 eV by the GOK model. The R value means different ratio of retrapping-recombination. The R value of LiF:Mg,Cu,Si TLD main peak analyzed as $1.12\times10^{-6}$ and $\alpha$ value analyzed as $1.0\times10^{-3}$. The R of LiF:Mg,Cu,P TLD analyzed as $7.91\times10^{-4}$, the $\alpha$ value means different ratio of initial thermally trapped electron density-initial trapped electron density (include thermally disconnected trap electrons density). The $\alpha$ value was analyzed as $9.17\times10^{-1}$ which was the difference from LiF:Mg,Cu,Si TLD. The deep trap electron density of LiF:Mg,Cu,Si was higher than the deep trap electron density of LiF:Mg,Cu,P.

• Journal of Korea Water Resources Association
• /
• v.45 no.7
• /
• pp.643-656
• /
• 2012

There has been an increase for the landslide areas and restoration expenses due, in large part, to the increased locally heavy rains caused by recent climate change as well as the reckless development. This study carried out a slope stability analysis by the application of distributed wetness index, using the GIS-based infinite slope stability model, which took the root cohesion effect into consideration, for part of Mt. Umyeon in Seoul, where landslide occurred in July 2011, in order to compensate the defects of existing analysis method, and subsequently compared its result with the case on the exploitation of lumped wetness index. In addition, this study estimated the distributed wetness index by methodology, applying three methods of specific catchment area calculation: single flow direction (SFD), multiple flow direction (MFD), and infinity flow direction (IFD), for catchment area, one of the variables of distributed wetness indices, and finally implemented a series of comparative analysis for slope stability by methodology. The simulation results showed that most unstable areas within the study site were dominantly located in cutting-area surroundings along with the residential area and the mountaintop and unstable areas of IFD and lumped wetness index method were similar while SFD and MFD provided smaller unstable areas than the two former methods.

• Journal of Korea Water Resources Association
• /
• v.53 no.9
• /
• pp.681-690
• /
• 2020

Generally, the design capacity of the rainwater harvesting unit is determined by trial and error method that is repeatedly calculating various analysis scenarios with capacity, reliability, and rainwater utilization ratio, etc. This method not only takes a lot of time to analyze but also involves a lot of calculations, so analysis errors may occur. In order to solve the problem, this study suggested a way to directly determine the minimum capacity to meet arbitrary target reliabilities using the global optimization method. The method was implemented by simulation model with particle swarm optimization (PSO) algorithms using Python language. The pyswarm that is provided as an open-source of python was used as optimization method, that can explore global optimum, and consider constraints. In this study, the developed program was applied to the design data for the rainwater harvesting constructed in Cheongna district 1 in Incheon to verify the efficiency, stability, and accuracy of the analysis. The method of determining the capacity of the rainwater harvesting presented in this study is considered to be of practical value because it can improve the current level of analytical technology.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.12
• /
• pp.5-15
• /
• 2012

In this study, a series of CFD (Computational Fluid Dynamics) numerical analyses were performed in order to evaluate the thermal performance of six full-scale closed-loop vertical ground heat exchangers constructed in a test bed located in Wonju. The circulation HDPE pipe, borehole and surrounding ground formation were modeled using FLUENT, a finite-volume method (FVM) program, for analyzing the heat transfer process of the system. Two user-defined functions (UDFs) accounting for the difference in the temperatures of the circulating inflow and outflow fluid and the variation of the surrounding ground temperature with depth were adopted in the FLUENT model. The relevant thermal properties of materials measured in laboratory were used in the numerical analyses to compare the thermal efficiency of various types of the heat exchangers installed in the test bed. The simulation results provide a verification for the in-situ thermal response test (TRT) data. The CFD numerical back-analysis with the ground thermal conductivity of 4 W/mK yielded better agreement with the in-situ thermal response tests than with the ground thermal conductivity of 3 W/mK.