• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.975-976
• /
• 1993

This talk presents the overview of the author's research and development activities on fuzzy inference hardware. We involved it with two distinct approaches. The first approach is to use application specific integrated circuits (ASIC) technology. The fuzzy inference method is directly implemented in silicon. The second approach, which is in its preliminary stage, is to use more conventional microprocessor architecture. Here, we use a quantitative technique used by designer of reduced instruction set computer (RISC) to modify an architecture of a microprocessor. In the ASIC approach, we implemented the most widely used fuzzy inference mechanism directly on silicon. The mechanism is beaded on a max-min compositional rule of inference, and Mandami's method of fuzzy implication. The two VLSI fuzzy inference chips are designed, fabricated, and fully tested. Both used a full-custom CMOS technology. The second and more claborate chip was designed at the University of North Carolina(U C) in cooperation with MCNC. Both VLSI chips had muliple datapaths for rule digital fuzzy inference chips had multiple datapaths for rule evaluation, and they executed multiple fuzzy if-then rules in parallel. The AT & T chip is the first digital fuzzy inference chip in the world. It ran with a 20 MHz clock cycle and achieved an approximately 80.000 Fuzzy Logical inferences Per Second (FLIPS). It stored and executed 16 fuzzy if-then rules. Since it was designed as a proof of concept prototype chip, it had minimal amount of peripheral logic for system integration. UNC/MCNC chip consists of 688,131 transistors of which 476,160 are used for RAM memory. It ran with a 10 MHz clock cycle. The chip has a 3-staged pipeline and initiates a computation of new inference every 64 cycle. This chip achieved an approximately 160,000 FLIPS. The new architecture have the following important improvements from the AT & T chip: Programmable rule set memory (RAM). On-chip fuzzification operation by a table lookup method. On-chip defuzzification operation by a centroid method. Reconfigurable architecture for processing two rule formats. RAM/datapath redundancy for higher yield It can store and execute 51 if-then rule of the following format: IF A and B and C and D Then Do E, and Then Do F. With this format, the chip takes four inputs and produces two outputs. By software reconfiguration, it can store and execute 102 if-then rules of the following simpler format using the same datapath: IF A and B Then Do E. With this format the chip takes two inputs and produces one outputs. We have built two VME-bus board systems based on this chip for Oak Ridge National Laboratory (ORNL). The board is now installed in a robot at ORNL. Researchers uses this board for experiment in autonomous robot navigation. The Fuzzy Logic system board places the Fuzzy chip into a VMEbus environment. High level C language functions hide the operational details of the board from the applications programme . The programmer treats rule memories and fuzzification function memories as local structures passed as parameters to the C functions. ASIC fuzzy inference hardware is extremely fast, but they are limited in generality. Many aspects of the design are limited or fixed. We have proposed to designing a are limited or fixed. We have proposed to designing a fuzzy information processor as an application specific processor using a quantitative approach. The quantitative approach was developed by RISC designers. In effect, we are interested in evaluating the effectiveness of a specialized RISC processor for fuzzy information processing. As the first step, we measured the possible speed-up of a fuzzy inference program based on if-then rules by an introduction of specialized instructions, i.e., min and max instructions. The minimum and maximum operations are heavily used in fuzzy logic applications as fuzzy intersection and union. We performed measurements using a MIPS R3000 as a base micropro essor. The initial result is encouraging. We can achieve as high as a 2.5 increase in inference speed if the R3000 had min and max instructions. Also, they are useful for speeding up other fuzzy operations such as bounded product and bounded sum. The embedded processor's main task is to control some device or process. It usually runs a single or a embedded processer to create an embedded processor for fuzzy control is very effective. Table I shows the measured speed of the inference by a MIPS R3000 microprocessor, a fictitious MIPS R3000 microprocessor with min and max instructions, and a UNC/MCNC ASIC fuzzy inference chip. The software that used on microprocessors is a simulator of the ASIC chip. The first row is the computation time in seconds of 6000 inferences using 51 rules where each fuzzy set is represented by an array of 64 elements. The second row is the time required to perform a single inference. The last row is the fuzzy logical inferences per second (FLIPS) measured for ach device. There is a large gap in run time between the ASIC and software approaches even if we resort to a specialized fuzzy microprocessor. As for design time and cost, these two approaches represent two extremes. An ASIC approach is extremely expensive. It is, therefore, an important research topic to design a specialized computing architecture for fuzzy applications that falls between these two extremes both in run time and design time/cost. TABLEI INFERENCE TIME BY 51 RULES {{{{Time }}{{MIPS R3000 }}{{ASIC }}{{Regular }}{{With min/mix }}{{6000 inference 1 inference FLIPS }}{{125s 20.8ms 48 }}{{49s 8.2ms 122 }}{{0.0038s 6.4㎲ 156,250 }} }}

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.3
• /
• pp.1-11
• /
• 2012

This study focused on establishing a natural rainwater circulation system using rainwater meant for relatively large urban development projects such as a new town development. In particular, when the location selection techniques for individual elements of a natural rainwater circulation system are developed for the integrated rainwater management, changes in hydrological environment will be minimized and the natural water circulation would be restored to realize the low impact development (LID). In that case, not only the excess will be reduced but water space and green areas in a city would also increase to improve the urban sustainability. First of all, there were five elements selected for the location selection of a rainwater circulation system intended for the integrated rainwater management: rainwater collection, infiltration, filtration, retention and movement spaces. After generating these items, the location selection items and criteria were defined for each of the five elements. For a technique to apply the generated evaluation items and criteria, a grid cell analysis was conducted based m the suitability index theory, and thematic maps were overlapped through suitability assessment of each element and graded based on the suitability index. The priority areas were identified for each element. The developed technique was applied to a site where Gim-cheon Innovation City development is planned to review its feasibility and limitations. The combined score of the overlapped map for each element was separated into five levels: very low, low, moderate, high and very high. Finally, it was concluded that creating a rainwater circulation system conceptual map m the current land use plan based on the outcome of the application would be useful in building a water circulation system at the de1ailed space planning stage after environmental and ecological planning. Furthermore, we use the results of this study as a means for environment-friendly urban planning for sustainable urban development.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.4
• /
• pp.21-35
• /
• 2018

In recent years, there has been a tendency to reuse 'landscapes of memory,' including industrial heritages, modern cultural heritages, and post-industrial parks, as public spaces in many cities. Among the various types of landscapes, 'modern historic landscapes', which were formed in the 19th and 20th centuries, are landscapes where the debate between conservation and removal is most frequent, according to the change of evaluation and recognition of modern history. This study examines conflicts between conservation and removal around modern historic landscapes and explores the value judgment criteria and the process of formation of those landscapes, as highlighted in the case of the demolition controversy of the old Japanese general government building in Seoul, which was dismantled in 1995. First, this study reviews newspaper articles, television news and debate programs from 1980-1999 and some articles related to the controversy of the Japanese general government building. Then it draws the following six factors as the main issues of the demolition controversy of the building: symbolic location, discoveries and responses of new historical facts, reaction and intervention of a related country, financial conditions, function and usage of the landscape, changes of urban, historical and architectural policies. Based on these issues, this study examines the conflicts between symbolic values that play an important role in the formation of modern historic landscapes and determines conservation or removal, and the utility of functional values that solve the problems and respond to criticisms that arise in the process of forming the modern historic landscape. Especially, it is noted that the most important factor that makes the decision is the symbolic values, although the determination of the conservation or removal of modern historic landscapes has changed according to changes in historical perceptions of modern history. Today, the modern historic landscape is an important site for urban design, and still has historical issues to be agreed upon and addressed. Thi study has contemporary significance from the point that it divides the many values of modern historic landscapes into symbolic values and functional values, evaluates these, and reviews the background social context.

• Journal of radiological science and technology
• /
• v.36 no.2
• /
• pp.99-110
• /
• 2013

In the medical field, the necessity of education growth for the professional Radiation Technologists has been emphasized to become experts on radiation and the radiation field is important of the society. Also, in hospitals and companies, important on thesis is getting higher in order to active and cope with rapidly changing internal and external environment and a more in-depth expert training, the necessity of new teaching and learning model that can cope with changes in a more proactive has become. Thesis writing classes brought limits to the in-depth learning as to start a semester and rely on only specific programs besides, inevitable on passive participation. In addition, it does not have a variety opportunity to present, an actual opportunity that can be written and discussed does not provide much caused by instructor-led classes. As well as, it has had a direct impact on the quality of the thesis, furthermore, having the opportunity to participate in various conferences showed the limitations. In order to solve these problems, in this study, writing thesis has organized training operations as a consistent gradual deepening of learning, at the same time, the operational idea was proposed based on the connectivity integrated operating and effective training program & instructional tool for improving the ability to perform the written actual thesis. The development of teaching and learning model consisted of 4 system modeling, scaffolding, articulation, exploration. Depending on the nature of the course, consisting team following the personal interest and the topic allow for connection subject, based on this, promote research capacity through a step-by-step evaluation and feedback and, fundamentally strengthen problem-solving skills through the journal studies, help not only solving the real-time problem by taking wiki-space but also efficient use of time, increase the quality of the thesis by activating cooperation through mentoring, as a result, it was to promote a positive partnership with the academic. Support system in three stages planning subject, progress & writing, writing thesis & presentation and based on cognitive apprenticeship. The ongoing Coaching and Reflection of professor and expert was applied in order to maintain these activities smoothly. The results of this study will introduce actively, voluntarily and substantially join to learners, by doing so, culture the enhancement of creativity, originality and the ability to co-work and by enhance the expertise of based-knowledge, it is considered to be help to improve the comprehensive ability.

• Korean Security Journal
• /
• no.27
• /
• pp.129-159
• /
• 2011

Physical security has always been an extremely important facet within the security arena. A comprehensive security plan consists of three components of physical security, personal security and information security. These elements are interrelated and may exist in varying degrees defending on the type of enterprise or facility being protected. The physical security component of a comprehensive security program is usually composed of policies and procedures, personal, barriers, equipment and records. Human beings kept restless struggle to preserve their and tribal lives. However, humans in prehistoric ages did not learn how to build strong house and how to fortify their residence, so they relied on their protection to the nature and use caves as protection and refuge in cold days. Through the history of man, human has been establishing various protection methods to protect himself and his tribe's life and assets. Physical security methods are set in the base of these security methods. Those caves that primitive men resided was rounded with rock wall except entrance, so safety was guaranteed especially by protection for tribes in all directions. The Great Wall of China that is considered as the longest building in the history was built over one hundred years from about B.C. 400 to prevent the invasion of northern tribes, but this wall enhanced its protection function to small invasions only, and Mongolian army captured the most part of China across this wall by about 1200 A.D. European lords in the Middle Ages built a moat by digging around of castle or reinforced around of the castle by making bascule bridge, and provided these protections to the resident and received agricultural products cultivated. Edwin Holmes of USA in 20 centuries started to provide innovative electric alarm service to the development of the security industry in USA. This is the first of today's electrical security system, and with developments, the security system that combined various electrical security system to the relevant facilities takes charging most parts of today's security market. Like above, humankind established various protection methods to keep life in the beginning and its development continues. Today, modern people installed CCTV to the most facilities all over the country to cope with various social pathological phenomenon and to protect life and assets, so daily life of people are protected and observed. Most of these physical security systems are installed to guarantee our safety but we pay all expenses for these also. Therefore, establishing effective physical security system is very important and urgent problem. On this study, it is suggested methods of establishing effective physical security system by using system integration on the principle of security design about effective security system's effective establishing method of physical security system that is increasing rapidly by needs of modern society.

• The Korean Society of Law and Medicine
• /
• v.16 no.2
• /
• pp.55-84
• /
• 2015

The tuberculosis is the infectious disease. Generally, the active tuberculosis patient can infect the 10 persons for one year within the daily activities like casual conversation and singing together. The infectivity of tuberculosis can continue for a life time, and infected persons can remain at risk for developing active tuberculosis. To control this contagious disease, along with the active tuberculosis patients, non-infectious but non-compliant patients who can be infectious if their immune systems become impaired have to be managed. To control the non-complaint patients, medical treatment order should be combined with the public order. Because tuberculosis is the risk of community health, the human rights like liberty and freedom of movement can be restricted for public welfare under the article 37(2) of constitution. Even when such restriction is imposed, no essential aspect of the freedom or right shall be violated. The degree of restriction on the rights of citizens is different what methods are chosen to non-complaint patients. For example, under the directly observed therapy program, the patients and medical staffs make an appointment and meet to confirm the drug intakes according to the schedule, which is the medical treatment combined with the mildest public order. If the patients break the appointments or have the history of disobedient, the involuntary detention can obtain the legitimate cause. The Tuberculosis Prevention Act has the two step programs on this involuntary detention, The admission order (Article 15) is issued when the patients are infectious. The quarantine order (Artle 15-2) is issued when the patients are infectious and non-complaint. The legal criteria for involuntary detention are discussed and published through the international conventions and covenants. For example, World Health Organization had made guidance on human rights and involuntary detention for tuberculosis control. The restrictions should be carried out in accordance with the our law and in the legitimate objective of public interest. And the restriction should be based on scientific evidence and not imposed in an unreasonable or discriminatory manner. We define and adopt these international criteria under our constitution and legal system. Least restrictive alternative principle, proportionality principle and the individual evaluation methods are explained through the reviews of United States court decisions. Habeas Corpus Act is reviewed and adopted as the procedural due process to protect the patient rights as a citizen. Along with that, what conditions and facilities which are needed to performed quarantine order are discussed.

• Journal of Preventive Medicine and Public Health
• /
• v.16 no.1
• /
• pp.163-192
• /
• 1983

In order to facilitate the Korean government's efforts in integrating family planning and maternal & child health at the primary health care level (or township level), the Soon Chun Hyang College of Medicine, with the financial and technical assistance of WHO, has under-taken a service research project. The project has employed a quasi-experimental study design introducing interventions tat provide crucial factors lacking in the ongoing government programs such as midwives and qualified referral physicians. The study is being conducted in three locations, one control area and two study areas. Before introducing trained Nurse/Midewives into the study areas, a baseline prevalence survey was undertaken from 15 July 1981 to 10 August 1981 in selelcted townships of Seosan County. In this sample survey of bath the study and control areas, 2,484 eligible women (97% reponse rate) were interviewed to obtain benchmark data on basic evaluation indicators related to family planning and maternal and child health. The salients results were summarized as follows.: 1. CONTACT RATES WITH HEALTH WORKERS; During the year preceding the survey, 12% of women were visited by government health workers. The primary reason for such visits by health workers was family planning (45% of the visits). About 34% of the women visited the health centers during the year. The primary reason for visiting health centers was immunizations for their children (45% of the visits). 3. FAMILY PLANNING USE RATE; The baseline data showed little difference between women in the study area and the control area on contraceptive use. Approximately 59% were currently using some methods. However, among those current users, almost half were practicing less effective methods of birth control such as rhythm or withdrawal. Among other methods, the tubectomy was the most popular (16%), while use of the IUD, oral pill and condom together reached only 14%. 3. PRENATAL CARE RATE; About 75% of the women reported no prenatal care for their last births (the youngest child of each women), Additionally, among women received prenatal care, over half had only one visit. 4. ATTENDANCE AT DELIVERY; Most of the women surveyed (over 80%) were attended by a non-medical person during their last delivery. These figures are somewhat comparable to the national figure of 84% for remote areas. 5. POSTNATAL CARE; The proportion of women reporting postnatal care was only 4.5%, and postnatal care was not received by the majority of women surveyed. 6. CHILD HEALTH CARE: In contrast to the low rate of maternity care for women themselves, most women reported obtaining immunization care for their children. About 75% of the women obtained Polio and/or DPT, 58% BCG, and 44% Measles vaccine for their children. However, in terms of illness care, while 35% of the women stated that their youngest child had been sick during the month preceding the survey, only 28% of these women took their child to the clinic for treatment. 7. COMPLICATIONS OF PREGNANCY AND DELIVERY AND ABNORMALITIES IN THE NEWBORN; Among all last deliveries, 18% of the women had pregnancy complications and 9% of the women had complications during delivery About 5% of the women reported abnormality in their most recent newborn. 8. REPRODUCTION EFFICIENCY; PERINATAL MORTALITY AND INFANT MORTALITY Based on data from the pregnancy history in this survey, reproduction efficiency was estimated. Out of the 11,154 pregnancies reported by all women surveyed, foetal loss was 21% (almost 16% were induced abortions) and infant deaths before reaching one year old were 3.1%. The reproduction efficiency was, therefore, reduced to 76%. In terms of perinatal and infant mortality rates, the former was 40.2 per 1,000 total births and the latter was 39.3 per 1,000 live births. Both rates described J shaped relationships with age of mothers and parity, and they were also correlated with birth interval and mother's education. In summary, this baseline survey data indicated a need for (1) improving contraceptive practices with more effective methods to prevent unwanted pregnancies and (2) providing better services for maternal and child care to protect wanted pregancies. In the Korean rural setting. the author believes that the latter is more important as the value of each child has increased as a result of the family planning campaign for the past two decades. This calls for more effective integration of Family Planning and MCH programmes to meet the needs of the family in each stage of the child bearing and rearing period with deploying more qualified personnel than the current government program personnel.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.21 no.1
• /
• pp.15-22
• /
• 2017

Purpose During Brain SPECT study, critical factor for proper study with $^{99m}Tc-ECD$ or $^{99m}Tc-HMPAO$ is one of the important causes to patent's movement. It causes both improper diagnosis and examination failure. In this study, we evaluated the effect of Dynamic Continuous Mode Acquisition compared to Step and Shoot Mode to raise efficacy and reject the data set with movement, as well as, be reconstructed in certain criteria. Materials and Methods Deluxe Jaszczak phantom and Hoffman 3D Brain phantom were used to find proper standard data set and exact time. Step and Shoot Mode and Dynamic Continuous Mode Acquisition were performed with SymbiaT16. Firstly, Deluxe Jaszczak phantom was filled with $Na^{99m}TcO_4$ 370 MBq and obtained in 60 minutes to check spatial resolution compared with Step and Shoot Mode and Dynamic Continuous Mode. The second, the Hoffman 3D Phantom filled with $Na^{99m}TcO_4$ 74 MBq was acquired for 15 Frame/minutes to evaluate visual assessment and quantification. Finally, in the Deluxe Jaszczak phantom, Spheres and Rods were measured by MI Apps program as well as, checking counts with the frontal lobe, temporal lobe, occipital lobe, cerebellum and hypothalamus parts was performed in the Hoffman 3D Brain Phantom. Results In Brain SPECT Study, using Dynamic Continuous Mode rather than current Step and Shoot Mode, we can do the reading using the 20 to 50 % of the acquired image, and during the test if the patient moves, we can remove unneeded image to reduce the rate of restudy and reinjection. Conclusion Dynamic Continuous Mode in Brain study condition enhances effects compared to Step and Shoot Mode. And also is powerful method to reduce reacquisition rate caused by patient movement. The findings further indicate that it suggest rejection limit to maintain clinical value with certain reconstruction factors compared with Tomo data set. Further examination to improve spatial resolution, SPECT/CT should be the answer for that.

• Journal of Hospice and Palliative Care
• /
• v.4 no.1
• /
• pp.4-13
• /
• 2001

Purpose : Since the acquired immune deficiency syndrome (AIDS) was first recognized in the United States in the summer of 1981, the number of these patients has been increasing in the world. But do not find out a cure and a vaccine for ARS (5). And so, the best treatment for AIDS is the prevention. People can find out accurate knowledge about AIDS, and they can prevent themselves from AIDS approximately 100%. In this study, we investigate with AIDS knowledge and attitudes in unmarried young men (<24 age) and suggest accurate preventive education for AIDS and good sexual behaviors. Methods : Un-married young soldiers and college students who were not diagnosed as AIDS until June 30, 2000 were included in the study. The study included a total of 923 men. A self evaluation questionnaire, included questions on 36 items(the part of demographic data - 9; the part of knowledge - 20; the part of attitudes - 8), was drawn up by three physicians. The demographic data, AIDS knowledge and attitudes were analyzed by chi-square analysis, and the total score of AIDS knowledge - comparison according to demographic factors and attitudewere analyzed by one-way ANOVA test. Results : In demographic characteristics, as for the first recognized time of AIDS, most of men knew it when they were in their middle school, as for sources of information on AIDS, most of them knew it through the TV-media, and as for the educational need about AIDS, most of them agreed with it. In AIDS knowledge, mean scores were $14.0{\pm}1.8$ (70.3%). Items of the misconceptions concerning AIDS, reported as less than 50% correct answers, were 6 among 20 items (30%). In AIDS attitudes, as for the item about that if I will be an AIDS patient, I will have an AIDS treatment, it showed that the number of men agreed with 759 (82.2%), and as for the item about that I will help for AIDS patient even though I don't know him, it showed that the number of them agreed with 412 (45.8%). In correlation of AIDS knowledge and demographic factors, the mean scores of knowledge of men with higher than college degree were higher than them of others. The mean scores of knowledge of men with total income of family with more than US$1667 were higher than them of others. The mean scores of knowledge of men with sources of information on AIDS through the TV-media were higher than them of others. And the mean scores of knowledge of men with past medical history of STD(sexually transmitted disease) were higher than them of others. Conclusions : The higher the knowledge he has, the lower the possibility of risk and the more positive the attitude he has. And then we think that the education program for AIDS will be included as a regular part of the curriculum in high school, and young men must be effectively educated by it.

• Journal of Nutrition and Health
• /
• v.50 no.3
• /
• pp.294-301
• /
• 2017

Purpose: The purposes of this study were to investigate food consumption practices and analyze factors that influence customer satisfaction of an HACCP applied restaurant in a highway service area. Methods: A total of 207 customer responses were used for data analysis. Statistical analyses were conducted using the SPSS program (ver. 22.0) for $x^2$-test, Pearson correlation analysis, and multiple regression analysis. Results: Reasons for visiting the highway area were using the restroom (86.0%), purchasing of meals or snacks (70.1%), taking a rest (58.5%), and shopping (3.4%) and selection attributes of food sold in the highway service area were food taste (48.8%), food safety (33.3%), and waiting time for meal (10.7%). According to the results of the survey, udon (66.2%) was the most preferred meal, followed by instant noodles (56.0%), kimbap (50.7%), pork cutlet (38.2%), and bibimbap (29.0%). In addition, coffee (73.4%) was the most preferred among snacks and beverages, followed by beverages (58.9%), walnut cake (53.1%), mineral water (52.2%), and hotbar (52.2%). Satisfaction evaluation scores of foods sold in the highway service area were highest for appropriate portion size, followed by food safety, menu variety, food taste, and reasonable price. Overall customer satisfaction scores regarding the restaurant in the highway service area was 3.24 out of 5 points on average. According to the results of the multiple regressing analysis, food taste (p < 0.001) and reasonable price (p < 0.01) had significant positive effects on overall customer satisfaction. Conclusion: To enhance customer satisfaction, restaurant managers in the highway service area should implement HACCP, improve food taste, and set up a proper price for food sold at the restaurant in the highway service area.